Leaderboard

For all those making comments on the character of various politicians, i think you're not judging them by the right criteria. Who cares what groups or politics corbyn or trump or boris support, the real judgement should be do they take their hits?

I do believe for many it wasn’t that he was going to open up the country etc etc , it was the way he takes no responsibility for anything he’s done or said in the past or the present that’s turned so many people against him . His apparent love of a lot of terrorist groups is well documented no one can deny it , his blatant anti-Semitic behavior again well documented and he’s completely refuses to take ownership of any of it that’s what so many hated about him. Boris is a manipulative man who plays the buffoon and he knows exactly what he’s doing BUT he will accept when he’s f*cked up , he will try and squirm out of it , but he does also admit it . dont hide your political views , just accept others will disagree and don’t lower your self to the level of so many these days who go straight to insults as a retort to a difference of opinion instead of debate . No sorry mate totally wrong there , Corbyn did support the IRA and even taking out the press embellishments it’s still very well documented . The big difference between the likes of the Kennedy’s or Trump supporting them and corbyn supporting them is the IRA wasn’t committing terrorist acts against America , They where against the uk and Corbyn was a member of parliament , THATS the big difference there . As to Chamberlin and Hitler , again big difference Hitler was a first world national leader not some tinpot terrorist from some shithole 3rd world desert bowl or a terrorist who’s actively attacking the nation your supposed to be politically representing ?

Get your crackers from M&S. More bang for your buck. In mine I got an xcortech x301 tracer,a mini holographic sight and a hop unit.amazing what you can do with slight of hand.the wife was amazed...she only got a metal ring puzzle,plastic magnifying glass and pair of tweezers. Better luck next year hunny! 🤭🤭 Regards

I wholeheartedly agree, I think this pretty much sums up Facebook. It’s pretty much a Christmas cracker for me. Looks appealing and promises much but the reality is less fun than expected and is full of tat.

In case you cant tell. I rather like revolvers. The holsters were made by me. The other revolvers will be getting them as well.

Well this thread has gone to shit x 10 so wtf... the thing about the photo's that they are snapshots in time to which others push the agenda that MUST indicate this... Not getting into Corbyn/IRA stuff - people can make their own minds up edit, soz but whilst on imgur I had this in my gallery which is still amusing.... however it is bad enough when people use genuine snapshots in time then push their own interpretation/narrative Yet the Social Media / Fake-Book BS where people push completely faked pictures is even worse A lie can travel halfway around the world while the truth is getting its pants/shoes on... except it was an old fake photoshopped picture... original article... https://www.realwire.com/releases/volkswagen-fixed-it-for-jim and another example... Then get into a row/discussion with people & they'll post pics of the sick nonse with Tory PM's - ergh don't go there m8, or I'll respond with pics with: Wilson, Callaghan, Blair, Brown etc... & advise them to just don't go there as I can post far more damning political stuff than just a simply pic (they usually get the message - but coz I pissed on their parade a little I get trolled on FB etc.. suffice to say due to complaints I was suspended during the run up to 2017 GE & then they demanded photo verification etc... to continue using their service) Meanwhile Trump has his Twitter account now locked until Biden takes over (even though he called for them to peacefully go home) Shelia Fogarty says SHOOT THEM & then a woman is shot & dies... the whole world has gone completely fucking nutz

And I know what liberalism is, and I ain’t falling for your trap. Liberalism in the American sense I assume you mean then, because in the classical sense liberalism is almost entirely about the right to self-determination. It's not a dirty word unless you don't really know what it means.

Because that’s no fun , so now I’m ‘offended’ and you need to be cancelled for offending me ! 😳🤦‍♂️ Funny thing is you say “”90% of mouthy Tory ;blah blah” but I’m pretty sure an awful lot of people would say EXACTLY the same thing about 90% of the socialist ideology supporters they met too , just As nasty and just as aggressive as the Tory fans to anyone who wouldn’t follow there way of thinking only real difference is there bile and hatred of the other side came from mirror image sources to the right-wingers but no real difference in content . No I think you will find most hate comrade Corbyn because he really is a terrorist loving anti-semitic c**t . 😉 But did you see it in a documentary on BBC2 ?

Just taking a few pics of everything in the collection to catagolize it, so I'll join with that AK GHK AKMs with steel outer, steel trigger unit parts, recoil kit, steel hopup unit, steel LCT PBS-1, Ra-Tech wood grip, a bunch of GHK mags and 2 ProWin mags (which must be the most stupid design for a 3rd-party mag-rebuild ever, you cannot fill them with gas without a fairly long adapter piece for the gas bottle )

I played at incursion when it was EAG dorking quite a bit, was my first woodland site and really liked the place. Haven’t been able to get back there for the past couple of years but will be missed.

Beacon 155 near Sunderland bit the dust at the end of last year due to it, and I believe Killhouse Leeds has just announced their closure today.

It was a Glockbob Glovepants.

I find it amusing when in the classifieds people who are selling multiples of one item say '£X each or all 5 for £Z' When the buy all price is exactly what the individual cost would be if multiplied by the number of items. Why word it like its got a multibuy discount?

I think the problem is that we as a country have become lazy and apathetic! We will sit on our arses,moan and groan about our lot and who we voted for and that's it. Sure we vote for someone else next time but we know in the backs of our minds that they will be the same so we will sit on our arses and moan and groan again lol. If you get a plumber to fix your tap and he does a crap job do you moan and groan about it and get another plumber? Sure you dont,you complain to him till he puts it right. If we don't like something get up and do something about it. I know I have on many occasions and it works. Regards

Parcel force is the only one that has been reliable for me. Anyway it's the sellers problem not yours. If they are not willing to do the leg work walk away.

I appreciate the skill involved in all your work....... but this hurts my eyes, you just can't unsee some things!!!!!

New slide in place, needs a bit of use to get it running as smoothly as I would like it to. Overall, it’s glitzy enough and seems to be chronoing fine at 330fps on Red gas. FPS drops rapidly after a few shots but it’s 4* outside and my bench is right next to a draughty fire escape. Front sight needs glueing and the magwells still aren’t here..

it probably says a lot about me that i need reminding that instagram exists.....

Thats basically the sole purpose of my account. Its kinda scary how many people do a double take these days when you tell them you dont have facebook (yes i have a ghost account for checking sites but i aint for giving it out to folk), its almost like if you arent on facebook you arent a real person. I think @proffrink has a very solid point. Seems to be that for the everyman facebook does pretty much everything in one place just well enough that they cant be arsed going elsewhere to get their information from better platforms. Tbh i kinda reckon i'm lucky to be just old enough to have matured the ability to distinguish real life from internet life before this all became mainstream.

The answer to that is a blatant NO

I imagine you'd get plenty of shots even on a 12g bulb, though if you can I'd definitely recommend going for the 33g Wraith stock if it would fit your build. I've been tempted to explore some sort of CO2 option when I finally HPA my TM m14, as having it all self-contained is ideal and as you said you don't need a huge tank if you're running semi-auto only, though I fear I may have to go the tank route with the Polarstar F2 I plan on fitting into it. I run a Wolverine Bolt in one of my VSRs and it typically gets me around 140 shots per 12g bulb while I'm running it at 2.3J on .48s. I'll swear by Wolverine products when it comes to anything HPA; their kit is fantastic, if a little on the pricey side! On the topic of purely mechanical systems... I can see the allure, but it's not a big deal. Batteries for HPA setups are tiny and pretty unobtrusive and you won't be running out of juice; my battery barely loses any charge through a whole skirmish day. I've heard they can be not as consistent as battery powered setups, but that's literally just 2nd hand rumour I've heard and I have no experience that would either confirm or disprove this.

I had a star all metal version, one of the best AEG's I've owned, rare as rocking horse poop now but worth having if the op can track one down.

If we're talking rows, there was a certain flame haired "angry kid" lookalike that couldn't come on here without having a Barney, about quite literally anything, he'd swear blind black was white lol.

Ooh, did he have a PHD from MIT in Wound Ballistics?

I have two Cyma M14s. My Socom one is stock but the EBR has a ZCI tightbore barrel and a flat hopped Prometheus Purple rubber. The issue with the hop unit being picky with the rubber comes from the original TM ones, basically the TM came with a hop rubber with little to no protrusion into the feed tube, if you replaced it with something like the Prommy one then it stuck out too far and would cause feed problems. If you do get issues of that nature you can CAREFULLY trim the end of the rubber with a scalpel or similar but you do risk causing airseal issues. So far I've not had a problem with either of mine though. One thing to beware of if you do go down the upgrade route is that the TM/Cyma inner barrel has different grooves than a standard barrel does so you need either an M14 specific one like the Prometheus EG or one with both sets of grooves like the ZCI.

There’s nothing like a whopping hairy toe in a picture.

Specna licensed DD mk18 upgraded to M4A1 spec with madbull rail and gratuitous M203 TM MEU 1911

I do love GBBRs 🙂 Details of the M4 builds can be found in the MWS mega thread... Same AK as above, but with suppressor and 5.56/.223-style mag...

Yep. Love chucking a single action around even on a skirmish day. I had an ASG Schofield I used to use a lot on a range at home and in cqb it was really effective. It can be really difficult at times but that's the fun. Anyway I've changed its colour now.

Cheers, its a G&G Arp556, which has gone through a few incarnations

ARES Amoeba CCR. Nowt else to hang off it .... no more room to hang stuff off!

Here, have a nice cursed SSX-23

Bought this with my first 'proper' pay check last year. Still in awe at its beauty...

Some WWII stuff Tanaka Arisaka Type44 Cavalry G&G M1903 converted to USMC Sniper version using a realsteel C-stock, Unertl reproduction scope and several realsteel metal parts:

After a bit of wear and an engraving service (I know the font isn't quite right but I'm happy with it) I also improved the hop so it shoots 0.25 quite well.

I got my complete G&P bolt today 1 hour before leaving for my CQB game and so was able to test it. As @AlphaBear mentioned before, the machining is of very high quality. The screw with the C-clip also sits around 1mm away from the bolt instead of flush, so I reckon this is some kind of design decision. Initial thoughts are that it is indeed completely drop-in unlike the Angrygun bolt was for me (dodgy sealing buffer meant shitty firing rate and sticky nozzle). I got a 0.30J increase in power which was unexpected and not entirely welcome since I originally intended to use this bolt for my CQB arena and install the G&P adjustable valve in my stock bolt to use outdoors as a DMR, but it seems like I'll have to figure something else out. I only tested with 0.25g bb's, but I was consistently getting between 98 and 101 m/s, so around 1.28 and 1.32 joules. It was very consistent , I would get 101-102 m/s with a fully filled mag with green gas, and after 10-15 shots, it would settle to around 98-99m/s. Also, I noticed a distinct change in how the gun sounds when firing. I'm pretty sure this bolt is louder the stock MTR bolt, and it has a distinct metallic sound when firing which is really satisfying which the Angrygun bolt definitely didn't have. I wonder if this is due to the roller bolt design? Overall, I'm pretty happy with how it turned out! I'm glad that it worked OOTB and didn't require any fitting or anything. Also interesting to note, the G&P bolt didn't engage my hop up dial like the Angrygun one did (the AG bolt would literally decrease my hop from 60% to 0% in a magazine or two), so I'm staying well away from AG internals for the MWS to be honest.

Epic post incoming! So I have fitted all the WiiTech trigger group to my MWS. I purchased this RIF second hand and it had been well used (to be polite!) and I had to give it a good clean out and service the mags as the empty levers weren't moving due to dirt/sand in them! The trigger box was in a similar state but after a strip down, clean and lube up it wasn't too bad, certainly nothing to write home about but better than it had been. Spin forward a year and I purchased a WiiTech marksman sear and fitted that...only to find that it didn't work (2 light strikes rather than a crisp break 😖) so I removed that, replaced the worn TM semi-sear and shimmed the sear, hammer and trigger pivots to eliminate some of the play and torsion binding that wasn't helping the trigger feel. Last month I splashed out £60 for a WiiTech hammer and hammer&sear spring kit from the great Fire-Support thinking that this might play nicer with the Marksman sear. I tried this with the Marksman sear and still had the same, dangerous, issues. So in a fit of crazyness I purchased a complete set of WiiTech trigger parts direct from the manufacturer, excluding the hammer and hammer&sear springs, but including a regular semi-sear. After 2 weeks and an extra £12 to ParcelFarce I had the parts in my hand. The material and finish quality is the same as the other parts; ie smooth, precision machining and black chemical finish. I fitted the parts after thoroughly cleaning the trigger box shell and the parts I was keeping in. I used some Graphite lock lubricant on the parts as I assembled them as it is meant to lubricate precision mechanisms and the "dry" formula won't attract dirt like oil or grease do. Top tip - wear gloves, it gets *everywhere* and don't lean too close when spraying it as it is a powerful jet and you will end up with a shiny face if not careful! With the parts fitted I tested it out of the receiver (sans trigger pin) and there was a smooth, crisp pull and no slop. Reset was positive and audible, it not quite as crisp as the let off point. Once I had it all reassembled I tested it and hit the only snag...with the AngryGun ambi selector semi was full auto too 🙄😱 I replaced it with the stock TM one and it worked fine, I think it wasn't allowing the disconnector to rise enough, I tried fettling it but gave up and stuck with the stock TM one. I shoot lefthanded but can still manipulate a right handed selector. Note self: Never buy AG stuff I have included a video below of a before and after video and one showing the trigger reset. I have also hosted the after vids on Instagram, search alex_random_76 In short, although it probably cost me £170 all in it is worth every penny. WiiTech trigger parts can go on the list with SixG parts, Hao Mk16 rail, RATech black NPAS and DynamicPrecision lightweight bolt that is titled "MWS upgrade parts that actually work and are worth spending money on" It isn't a long list 😁 20201021_141414.mp4 20201021_150510.mp4 20201021_152138.mp4

Yeah modded mine too. Just annoyed the correct trades didnt come out as well as I was hoping. I did set it up as a Mk3.... but then a few pics arose of the Mk2 type. And was surprised to see still using the looped hammer. So thought I'd stick with the early mk2 until the WE mk3 came out.

I think this one is the winner from what I've seen:

My Marui USP 9. As close as I can get it for Australian Commando spec. Detonator metal barrel. Repro surefire x300. Element repro surefire light mount. Sadly you can't fit a Jet Funnel magwell to a marui gun.

My we scar L gbbr bullpup conversion. this is a Sr union scar h Bullpup kit modified to fit the L

It never really gets taken out of the case much, but it still takes good glamour shots 😁

A WWII duo... Double Bell K98k Real Wood and CYMA M1928. Amazing what adding a sling can do for authenticity.

@GothicGhost i bet thats actually quite effective camo in use! Finally got around to assembling the G36C, on the whole very happy with the build, although i think im going to have to swap the X-ASR for a Pico AAB, the internal rollback noise of the gears to the anti reversal latch drives me mad on semi!! Of all the colours i feel the FDE on the mags is the least effective, its too bright i feel, ive got some good ol' Humbrol Dark brown (FDE) aerosol which il prop spritz them with as its such an awesome FDE in use. The whole layout of the gun colouring was to blend with myself / Pencott Greenzone at the rear of the gun, and wrapping the gun around trees/fortifications/dirt etc at the front end.

The old girl got a face-lift In all honesty I've been wanting to do a KWA Vector build for forever. I've lurked on the FB page for some time now, and had an idea of what I wanted to do, but I knew one thing was needed for sure before I invested time and money into the project - an HPA drum. Ive tried the GBB primary route and despised it for a single reason - the mags. Thats why Ive converted so many of my GBBs to Daytonas - WE Masada, VFC M27, etc. Especially here in the States, where its all about highcaps and volume of fire (I do miss UK airsoft; running around The Mall with my TM GBB MP7 or dual pistols...). While I dont need 1000 shots to get a hit, 40ish shots was a bit too little, especially when you go to reload and find your mag has leaked all the gas out. So a drum is a must. As such, my Vector has sat, and sat. Then, I got an offer. It was a bit steep IMO but I took it, and then I was the proud owner of a broken Reaper Airsoft Customs drum mag for the Vector. Let the build begin! The repair ended up being easy - a lot of epoxy and drying time and it was good to go. I didnt want to use a cheap China clone for a sight like I have on some of my builds - Ive had Daytonas throw off their zeros before. So I used a spare Vortex Sparq AR red dot I had. Magpul MOE irons and AFG2 mod to match my real Vector, Ace1Arms right hand mag release (so much easier when using the drum), replica Surefire M600DF light and my signature blue-lasered PEQ hooked up to a dual pressure switch. I also had to add a 45* rail for the torch so that I could still fold the stock. I have a Defiance .45 ACP suppressor but I am unsure if I will use it due to not needing an increased inner barrel due to FPS gains... Cover the remaining rails with ladder covers and add a sling swivel stock pin and the build is (externally) done. Still need to decide on what to do inside though... Yes @rocketdogbert I will use the FB page for that.

Cyma SOCOM M14 that I've been faffing with ready for the eventual return of Red Alert...

Got bored. Had Paint Pens 😎 Makes the gun looks much nicer I reckon. I think I'll leave the trades on the slide alone, what do we reckon?