Leaderboard

Thank you, yeah that thing was a really nice build, never did get to use it in anger. I would say the only thing needed is the hammer, the AA one is better for a "perfect" fit, the CowCow one is a touch cheaper but has fitment issues with the Mamba uppers if you ever strayed that way. Other that that, nothing is needed on these pistols. They'll happily hop up to 0.4's out the box with no mods. Sure you can upgrade the barrel for small % improvements in grouping at range and you can stick H plates under the hop arm to hop heavier ammo and you can short stroke for a mega ROF. None of it is really needed, they are a fantastic pistol......kinda makes me want to buy one again.

Just got a WE PX4 EXS 'Bulldog' Added the barrel adaptor so I could put in a slightly longer inner barrel. Shoots well at around 290fps and quite hefty at 814g Pics with the longer magazine. Also comes with a smaller one

Can we fast forward this thread to the point where I say I’ve bought the TM MP5?

Just picked up this bad boy TM MWS AKM it feels so solid, sounds great, really accurate (only tested on a short range) …. Now too see if it needs a super nub 😎

Looks great! I've reduced the overall length (piston plus barrel) to make handling easier and reduce weight and aiming issues, most the ones I've seen are basically sniper set ups nailed to a bow so I've deigned from the ground up- I'll be able to post pics in the next week or so, if anyone would like to see how does it handle? Is it usable?

The MWS is done. No more changes. I’ve spent way too much on it 😂

Scammer Warning: If a member does not have an advert here, and wants to sell via private email be careful.

I'm going to do this review slightly differnetly from normal. Usually I'd take the AEG to bits and talk about the good and bad parts but there are plenty of youtube videos out there comparing the GBLS to other platforms and very little on what it is like to use one. I'll cover the elephant in the room, the price, later on in the review and give my thoughts. So this is my GBLS and I bought the budget/skeleton kit for a couple of reasons. As much as the full rifle is nice I was never going to keep the supplied rail and was probably always going to make my own verison (Mk18 ish in my case however this might change to a MK16 or L119A2 depending on what I finally settle on). If you have been living under a rock a little bit about what the GBLS is might help..or not. It's not a GBB rifle but it uses a similar design, it's not really a typical AEG but it uses a similar design. Confused? Well the closest thing to it would probably be the TOP M4 shell ejecting M4 but the GBLS doesn't eject shells. Inside the lower receiver you will find the gearbox and in the pistol grip is the motor. In the upper receiver you will find full sized bolt. Inside the bolt is the piston head and spring. The way it works is you pull the charging handle to the rear and when you release it it pushes the bolt forward and chambers a BB in the hop unit. You pull the trigger and this releases the compressed spring which pushes air out the front of the bolt propelling the BB out the barrel. At the same time the gearbox kicks in and cycles the bolt again and loads another BB. If set to semi it does this once. If set to auto it does that until every BB is fired out the magazine and the bolt locks in the rear position and you then take out the mag, replace with a fresh mag and hit the bolt release which loads a BB in the hop. I'm going to be aiming these next comments to people who have been skirmishing a while and use PTW's, GBB's and NGRS's. You know that way on a PTW you can get a quick double tap off quickly and both BB's will mostly likely hit the target. On the GBLS that's not going to happen. Well it will but you are going to have to train with it to get a grip with the recoil as after the first cycle of the bolt your aim will be off by quite a bit. You know the way when you full auto a GBB rifle and the FPS drops about 30 or 40 from the first shot to the 35th shot. Yeah that doesn't happen. The FPS is consistant from BB 1 to BB 60. You know that sound and slight recoil you get when you fire a NGRS well that doesn't happen. You get a very nice kick and quite a loud sound as the bolt slams forward. I'm not having a go at these other platforms as I have them all and enjoy them but the GBLS is just a bit different and in a good way. I'll do a few more comparisons to the other platforms so that the more experienced players get where I'm coming from. On the GBB it's great to have the bolt lock back making you do a mag swap, slap the bolt release and get back in the game. When I run a GBB (MWS, GHK, VFC, or any of the others I run) I'm always concerned that the gas I'm using which was under the site limits at the start of the day is now pushing the BB's above the site limit because it's now the afternoon and it's 10 degrees hotter. I'm also concerned that in the colder months in the UK I'm not getting the best from the platform because it's cold so tend not to use them. The GBLS gives me the mag swaps and the recoil I get from my GBB's but at a consistant FPS the whole year. The recoil is probably just as good as my MWS running sub 350 FPS and if there is a difference it's hardly noticable. On the PTW or a NGRS with a Titan fitted I get some nice snappy shots off. I don't get this on the GBLS. My first shot is snappy and on target but the 2nd shot will need adjusting (GBB people will know what I'm talking about). On the GBLS the trigger pull feels very real. I've heard that the trigger pull was about 10 lb but mine seems to be about 8. It feels very realistic with a nice break and reset. It feels more realistic than my GBB's never mind the PTW and NGRS. My opinion at the moment is the GBLS DAS is more realistic than a PTW or NGRS and more reliable than a GBB. Before I move on to price I'll mention the following. I ordered 2 Nupol 11.1V 30C Lipoi batteries as I thought the GBLS might eat through a battery since it's shifting the heavy bolt back and forward. I used 16 full mags today on 1 battery and there is still plenty of juice left in it so it doesn't seem to be current hungry. I had zero jams, stoppages or feeding problems with the 8 mags I used (although I did loose one somewhere along with a Glock 19 but thats another story!). I took it out the box, set the hop with 0.3g blaster BB's and was easily hitting 55 meters with accuracy and the FPS is running at around 320 (on a 0.2g BB). To be clear I have done nothing to it, straight out the box if fires flawlessly and that leads into the price. So £1350 for a toy gun is quite excessive or is it? Let's have a look at the other toys out there. Let's start with the GBB as this is probably the cheapest platform when comparing it to the rest unless you look at the running costs over a long period of time. So a MWS is around £500 then you add 7 more mags at £45 a pop. Let's also remember that carrying 8 BGG mags is a chore as they weigh a ton. Let's say you want to get the best range out to 55/60 meters so you might chuck in a tightbore and maple leaf rubber and possibly a NPAS to control the FPS. So you are probably looking at about a grand now. TM NGRS can be a bit of a money pit when it comes to getting the best out of them. £550 for the AEG, £150 for the titan, 8 mags at £25 each, tightbore, S hop, new spring and spring guide and possibly reinforced gears to replace the soft TM gears. We are probably at around £1200 now. PTW's are anywhere from £1200 to £2000 depending on the model you buy but then you have spare mags, possibly get the hop sorted, have the electrics waterproofed and then maybe have the motor rewired. God knows the final price of a full tuned PTW. I hate to think how much I've spent over the years on them. At this point you might be seeing the point I'm trying to make. £1350 plus £35 a mag doesn't seem that expensive when you don't have to upgrade/replace/rewire anything and it justs works as advertised out the box and is more realisitc and reliably than the other platforms. Are there any negatives? I know of 1 and heard of another but never experienced it. The electronic board in the gearbox doesn't like to get wet or so I have heard. Tell me a titan or Systema board that does. My only slight gripe is the metal mags rattle a bit inside the magwell. This is genuinely the only negative I could find with the GBLS. Is it the best airsoft gun in the world? well no but it is the most reliably realistic one out there and it's very much a nice experience using it. I'll finish this review of with a couple of notes. I handed it to about 10 team mates today and everyone had a stupid smile on their face after that first shot. I think a few AEG's will be getting sold off shortly to fund a GBLS. I'm probably going to be one of the ones selling other AEG's as I see that there is now a HK 416 GBLS. I'm not in anyway associated with GBLS but if you want to send me the steel bolt and Type B buffer I'm not going to get upset. Just saying.

Hi guys, Fairly new here so be gentle I'm an avid tinkerer and maker of anything and have been developing an airsoft bow just for fun... I was wondering if anybody actually would want one in a game and if so, what would you want from it? Apologies if I've posted in the wrong place! cheers!

My dad used a compound bow for his so that the draw is the same each time. He's set it up to fire at basr power levels but you could change it to cqb friendly levels by swapping to a lower volume cylinder or adjusting the cams to reduce the draw. He did the maths and even this cheap kid's bow he used is capable of in excess of 9J so he volumed it to be safe for airsoft and used the excess cylinder volume to feed the air back to behind the grip to keep the length down. He also made a buffer system in the front of the cylinder to stop it from tearing itself apart.

I personally get a little triggered by the amount of money that people spend on the AAP-01, as like you said it's almost close to the best it could ever be straight out of the box. Unless you live somewhere where the ambient temp stays at the same all year round, our you use it with HPA, why spend hundreds and hundreds on something that could be a compromise 6 months of the year (I just don't understand those who spend hundreds modding it to a DMR when a AEG DMR would always be cheaper and better).

Divorce came through today - glad I’m free from the the most vile cunt I’ve had the misfortune to meet. New gun to celebrate

If I had a 3d printer. cnc machine and a lot of spare time then I could definately make it work but unfortunately I have none of those so Ill stick to screwing together premade parts XD.

Finally a release date on this now the 18th of August in Japan will probably be in the UK end of August start of September Also prices for the mags seems like it will be around the £30 a mag mark judging from the Eagle6 website

Sure, it would be interesting to see what you've come up with. It's not that insane an idea, you're just using a leaf rather than a coil spring to shove a piston down a cylinder, and let's be honest, we're all playing with toys. If it's draw-and-release rather than drawing to cock a latched spring, then consistency might be an issue, and CQB sites in particular might want to take a hard look about what it's really capable of, as opposed to how long a pull you use for chrono.

@AlphaBear looks like a gen2 hammer. So stock and still just as chocolatey. Get one of the CNC ones in there and the problems go away.

Job done. Perfect, tight fit first time (wasn't expecting that, hence the Red filament as I'm running low on black). Will print a black one shortly now I know the tolerances and fitment work.

I believe when you open the 203 ones it effectively recocks the valve and on the gp25 ones shoving the shell in resets it. Either way this launcher costs 1/5 the price of either of those so ill take having to turn a valve for a second.

Haven’t seen any mention of it so thought I’d post up , so what the title says ! Had this pop up on my feed a few days ago , happy days just need to source a decent scope and mount now ! 😁

Thanks for the heads-up Druid. Yeah, I've been interested in this since it was announced but gona have to save up for it and will probably be a garden plinker and wall hanger rather than use in a battle. (Depending on performance of course) Hopefully Brexshit will be less of an issue by then or wait a bit longer for them to come into UK stock.

I used the replacement AA one that Airsoftworld stock. In sure I put a screenshot of it in an earlier post!

Surely this makes more sense https://www.gdfb.co.uk/larp-archery-275-c.asp

My dad built this a couple of years ago. There's also someone else now making and selling their own design.

Mine's one of the last of the current batch, new patch is in the works apparently!

Will he make me a speedsoft HPA TM recoil?

What gun is this replacement gearbox going into? Even thought they are version 2 gearboxes they are not exactly the same and may require modification to fit. Performance wise don't known about KWA SHS make reasonably good quality parts. If you are buying them in the uk both should be site legal but you can't say for sure until you fit them and chrono them.

No, it's a weird one. Generally I only run Geoff's, but I have occasionally picked up a bottle of some generic Blasters or similar if I've run out on the day. Honestly no idea how long that's been in there. Although now I look at it I'm wondering if the bb at the bottom of the loader is a bit oversized too... I guess the answer to this is to shoot more ammo so it's not sitting around as long? Airsoft solutions to Airsoft problems.

If you have the tooling you can correct those seats with flat endmills. If you have access to a milling machine and bits then it's as simple as screwing the shell to something, clamping that to the bed. Find the centres and just do a fine feed to touch it back to square. Takes a couple of minutes with the right tools, without them it's a very difficult task to get right and If I didn't have access to a mill then I'd be looking at new shells as well. Cyma and JG also make decent V3 shells, Unlike a V2, V3's are generally a lot more robust and don't need to be anything special. Those modify ones I'm a little sceptical of. With absolutely no evidence I'd be worried about the weight reduction near the spur gear. I'd certainly be thinking about using a piston rack with a few nylon teeth rather than a full steel rack to keep a weak spot.

That must be nearly 10mm. Are you sure a tic-tac or smint hasn't gotten in there somehow? Lol. Somebody on the forum did some in depth bb testing a while back and one of the tests was to leave different brands soaking in water for some time. As I recall they didn't increase in size. Not sure if he tested bios though. But even so I have read that bios take years to break down completely.

Less than a month and you'll find something new to buy

I see someone is flogging G&G Drop stock adapters for £25 a pop. Decided to design my own for my son's gun (he wears a paintball mask). Not quite as slick as their design, but an hour or so of CAD work gives me this. Prototype is on the printer now.

Most bio BBs don't swell up, or at least modern ones don't (although their "biodegradability" is questionable). In any case, don't use poor quality BBs, bio or not...

A couple from the weekend with G3SBS

I learnt why my speed loader stopped working...

@Lozart snap although mines the 1st gen non glow in dark one XD think he needs to do a new one without the hawk XD

Here is a vid of the grenade launcher. This is from when I was still deciding on an operating pressure. so the shots are a little inconsitent. Its now running for about 9-10 shots at 300 psi quite safely with the ability to quickly crank it up for long range shots if necesarry. Runs off 12 gram co2 cartridges in the front section. Still needs prettying up a bit though. Grand total of around £100-120 spent (including 1 co2 rated tag shell which is most of the cost)

I played Zmart on saturday and I had a amazing game day. I dont know what clicked (maybe I was missing my proper cqb) but I was on fire. Playing pretty aggressively, as in pushing forward, always moving and shooting and changing positions, taking ground and generally being a nuisance I was picked as a rogue VIP (for those that remember those games at The Mall) and was holding both teams off from different directions for ages. One of the players thought there was a squad in the area I was as I kept moving so much haha. One of the games I must have been 30+ kills for 1 death and all I was using was a pistol too. I can honestly say it was probably one of my best days of gameplay. Cannot wait to get back there

Leave it alone, use it and see what works or doesn't work FOR YOU. It already has a mosfet fitted so changing to Deans is a bit moot but you could if you wanted to. G&G midcaps can be a bit hit and miss so try some of the cheaper mids (Nuprol, Battleaxe etc) first as they may well work just fine. eh? Nope, different gearbox.

The clone Surefire Warden arrived.

BAH!!! I’m aweh on holibobs another month ticks on before again meeting UKARA requirenemts 😭 cheers for the heads up tho Carl 🤙

TLDR is better grip to pull them out of pouches without having a loop which can get caught on things/adding length to the mag which can be a twat when prone. The purpose of a magpul is to make getting mags out of pouches easier, so they're still doing their job without the loops.

shots fired! don't worry, he's got a gbbr he's almost out of ammo already.......

I'll be there the 8th 👍

Rocking the combat Jellybeans this past Sunday..

the skeleton kit doesn't have the trades and the pistol grip is AEG spec so you can use any AEG pistol grip. Stock choice is the same as a NGRS so if you can fit a 11.1v in it then it will work. I was going to comment on the fact that some people are going to swear by GBB's and forgetting the reason they bought a GBB was that no AEG had a decent recoil but then I noticed you mentioned WE and I came to the conclusion you are just clickbaiting as the 4 WE GBB's I have here a testiment that they are the worst airsoft guns out there.

I'm seeing them all over the place now. You think they could at least spring for a few mid-caps.

Hi Joe. Welcome aboard the good ship airsoft. May your seas be calm and your shipmates calmer.👍 I'm a Viper groupie so I would deffo go with the viper multicam boots. Had them for years but that only equates to a few pairs cause they last a long time and that's with using them for work and games and the zips make them easy on and easy off bit like a ten bob whore. Lol Forget army boots. Heavy and sweaty. Carp fishing? Forget that! Once you start airsoft you will be selling all your bite alarms and rods 🙂 Have fun👍 Regards

My mate emptied a hicap of 0.28’s into my (clearly labelled) bag of 0.36’s, so I’ve had to buy 6000 0.36’s from the only seller I could see still had any stock of Geoff’s!