Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 16/03/22 in all areas

  1. Sifu Steve

    Gun picture thread

    Just finished another weathered paint job. This is 'Starry'*. I wanted it to look like it's been dug up out of a Ukrainian garden after 20 years and recalled to active service... and I think it worked. 😁 Method: I stripped it back to bare metal, primed and repainted black so that when the paint inevitably chips, it's exposes the metal. I then used acrylic rust colours from brown to orange, dabbed on with foam in patches. The whole lot was then covered in an uneven textured 'technical' acrylic to give it the caked-up finish. The wood was sanded to remove the top layer then I used an aggressive sanding brush disc to carve runs into it. It was then doused in an oil-coloured acrylic wash to make it look distressed and a bit rotten. Finally, it was airbrushed with layers of matte varnish and chipping agent. Long live the 'Kraine! 🇺🇦 *Real name 'staryy brudnyy svoloch' (старий брудний сволоч) which is Ukrainian for 'Old Dirty Bastard'.
    3 points
  2. 2 points
  3. Esstac KYWI pistol mag pouch. Works great for my FNX45 mags, and my Glock mags.
    2 points
  4. I wanted to see if I could make a magwell adapter to take the ACP9K 9mm magazines. Turns out I can.
    2 points
  5. You seem to have misspelled "vector's". @mike223 For the avoidance of doubt you only need one RIF. As long as you keep it maintained then it's going to be reliable enough for you to enjoy the game on a regular basis. Of course, if you want more than one then that's fine too. Full disclosure - I have three M4's and a MK12 (which is basically an M4 in a frilly dress), three M14's (one long, one short and one in a frilly dress - ie an EBR), two MP5s, a SCAR-L, a G3, an M249 (when my back holds out), a MAC 11, a breacher shotty and an HK45. I used to have an AK but the ergonomics didn't work for me. Logistics isn't an issue if you're prepared to put in a bit of thought or just have a few rigs/placards. Lately I'm favouring the old school stuff that will hold just about any mags. If you have space in your house and your bank balance can stand it, fill your boots. Just don't get into debt to play toy guns. Be honest with yourself and keep what you like unless you need to either make space or money.
    2 points
  6. 2 points
  7. If you need to know the difference between a chickpea and a lentil, remember that no one has ever paid for a lentil on their chest.
    2 points
  8. I have been summoned! So, I've done a lot of testing around this with my HPA m21 build and it really does come down to what you value more and what power limits you're working with. I will preface this by saying that I value effective range, so that's all the testing I work with. I don't care if you can spray your AEG at a 75m target and maybe hit it with 1 of 10 BBs, I measure if you the gun can consistently hit a man-sized target 9/10 times at a certain range. Some sites operate DMRs at 1.48J, which is utterly pointless in my opinion as you gain barely anything (I didn't notice any visible increase in effective range) but you trade off the ability to point-blank shoot, which can come up more often than you'd think. Some sites operate DMRs at 1.64J, which is a bit more arguable in its use since you do notice a slight difference. I noticed just about 5m more effective range (if that, honestly...) when running my m21 at 1.64J on .4s, however again you're trading off that MED for a, in my opinion, negligible increase in effective range. My local site runs DMRs at 1.64J with a 30m MED which I've looked at and decided I'm never running a DMR there because just about 5m more effective range vs not being able to shoot at anyone within 30m is a no-brainer for me. However, some sites allow DMRs up to 1.88J (which is what it was most places back when we measured in fps) with either a 20m or 30m MED. At this point I feel like you gain enough of a benefit to counteract the drawback, though mostly just in the marksman role, as I noticed I started to hit an effective range of about 10m more than my 1.14J setup while running 1.88J on .4s (I would probably use .43s or maybe experiment with .45s at this power, I just didn't have any). 1.88J with a 20m MED is where I'd run a DMR, otherwise I'm just going to run 1.14J or I'll use a BASR instead at 2.3J. I cannot stress enough how useful having no MED is; it won't come up all the time, but you'll remember every time you get hit out because you've had to swap to your pistol since the enemy are too close. Running a 1.14J "DMR" is a great idea and I've had a lot of success with it, even with my spring TM VSR build which is also a 1.14J build (it's consistently around 1.1J). An effective range of 60m is what I've achieved running my m21 at 1.14J on .32s and it's more than enough; I've been out-ranging the braggarts who claim their AEG hits out to 70m and even contending with a lot of the BASRs people seem to run (a lot of people don't put enough time and effort into their builds...), so I'm happy with it. You can go heavier for a little more consistency, but I go .32s because after that is where ammo gets exponentially more expensive and the benefits I get from heavier BBs at 1.14J isn't worth the investment at the moment. Let me make a few career jumps then we'll talk again Out of the box it... isn't that great. When you're trying to take long range shots, you really start to feel the 0.8J and the fact it can't hop much heavier than a .28 out of the box. I love my TM m14, but I've put a lot of money into it and wanted the TM externals for my HPA m21 build because it was going to be my magnum opus 1.14J build (and oh boy is it ever...). If you want something more affordable and you're not too bothered about a lack of trades / slightly worse quality externals, go with a Cyma m14. I have a Cyma m14 that I've set up as a Vietnam-era m21, though I will convert it to a DMR stock when I can afford one / one is in stock somewhere, and it's fantastic. It will likely come out of the box at around 1J if you order it in the UK (they're higher power out of the factory, but I believe most places reduce the power before selling them because otherwise they're a section 5 firearm out of the box!), but a quick hop rubber and barrel change will have it shooting incredibly well for the price point. My Cyma m14 build has cost me... about £130 in total because I got mine from TG before Brexit, but a Cyma m14 is £150 from Patrol Base, plus Maple Leaf macaron (£10), Omega nub (£5) and a ZCI stainless steel inner barrel (£25) will be a pretty powerful setup for under £200. It's what's in mine and while I haven't run it in a long time it was performing almost as well as my super-expensive TM m21 setup. Almost because it's not as quiet and not quite as consistent, but it's more than enough! Upgrading the gearbox internals of an m14 isn't too difficult either, but it's a laborious process. Dismantling the m14 takes a lot of time and care because there are springy bits all over the gearbox that you have to remove to get inside since the fire-selector and trigger contacts are on the outside of the gearbox. It's easy once you know the gearbox, but the first time will take you hours... You and me both; it's why I'm now transitioning away from AEGs (will use my NGRS 416d until I can get an MWS or more mags for my AKM). HPA for sneakybeaky, GBB for speedyboi clackclackclack. If you wanted to do a GBBR DMR build, I'd recommend the MWS platform on red gas. I haven't done my MWS build yet, but it's something I might toy with the idea if I can get the external parts to turn it into a mk12 SPR. Now, with gas guns you definitely lose consistency, however what you lose in consistency you gain in FUN. Seriously, I took my AKM out for its first game day over the weekend and my decision to start transitioning completely away from AEGs was just solidified in my mind. Every kill was more satisfying because 35rd magazines and cool-guy-oper8r-tac-reloads and firing it was an absolute blast with the recoil. You will get fantastic range on a GBBR if it's set up right and it's far easier to work on than any gearbox AEG, but it won't be the most "competitive" choice. However, that can be a wonderful catalyst for improving your drills and general gameplay performance as you're essentially playing with a handicap that you'll have to make up the gap with your own skills. Anyway, that's enough from me. Thank you for coming to my TED talk.
    2 points
  9. EDcase

    Gun picture thread

    Latest family reunion Do you ever get the feeling its time for a bigger sofa?
    2 points
  10. GearTech

    Cyberpunk Sci Fi loadout

    Armour from Sam over at Apextech UK Helmet from USACyberpunk on Etsy RIF is the ARES KEL Tec RDB Edited on Photoshop
    1 point
  11. Just want to see some of the kaleidoscopic bruises from BB's that some of you guys must surely have. I'll start. Loving the deep burgundy dappling with a greenish edge fading to yellow.
    1 point
  12. Sifu Steve

    Gun picture thread

    Yeah, it's definitely on the top end of the 'worn' scale. 😄 I recently finished a job for someone at my local club, weathering their bland 'stainless steel'-coloured DEagle into a rather nice black.
    1 point
  13. is that the one that looks cool in video games but only because video games cant convey the fact that it weighs approximately 19.48 tons?
    1 point
  14. And you are unsure which is worse: seeing your mother naked or continuing to wank over the video .
    1 point
  15. Skullchewer

    What have you made?

    Patch arrived. A bit big for my helmet. Think I'll get a smaller one done and use this on my rig till then.
    1 point
  16. It's a clone of a TM if you get the metal receiver version it's surprisingly heavy. standard V2 gear box so no parts availability issues. it's a work horse gun nothing special JG hasn't done anything to them since they started selling them 15/16 years ago.. having a check all UK retailers are massively over charging for them they should be £100ish. really want Taiwangun to start shipping to the UK again.
    1 point
  17. I went old-school-ish and bought Austrian Paratrooper boots. I can't fault the ankle protection and the build quality, and they've even been quite comfortable, but they weigh an absolute ton. Well, a kilo or more each I think. The advantage is you can hose them off if they're muddy without stressing about it, but the disadvantage is they must be sapping my limited fitness, so I'll be in the market for some lighter boots at some point. Are all these Cordura style boots ok for wet / muddy conditions? And do they have adequate ankle support?
    1 point
  18. Armo1000

    VFC FN FAL

    Not VFC, but just got this reply from King Arms.
    1 point
  19. since this has been revived, I thought I'd update. AEG is running fine to be honest and the only modification currently is a little cover for the ambi mag release as I have a tendency to knock the release on my chest rig, which is annoying. I designed and 3D printed a cover to stop this happening.
    1 point
  20. Viper are ok, own a set myself..great for summer in the heat. I also have a pair of Lowa Zephyr GTX mids which are fantastic and comfy. I also own a pair of German special forces combat boots that I picked up from my local surplus store....I can wade through a knee deep stream at my local site x3 times before they let water in through the socks..as I have retired my old Altberg boots as the treads are too worn. (Used for colder months) Just go to your local surplus and have a looksee...sometimes you can find a bargain on hardly used boots.
    1 point
  21. Shamal

    Tell Us a Gag. Please!

    My Grandad always said "The first rule of theatre is to always leave them wanting more" Great bloke... Terrible anaesthetist...
    1 point
  22. sonofsammo

    Tell Us a Gag. Please!

    I told my friend the other day that I built a model of the Himalayas. He asked "to scale?" I replied "no, just to look at".
    1 point
  23. You learn how in lesson 2 of the underwater knife fighting course
    1 point
  24. After being hit by a sniper from about 40 feet
    1 point
  25. After what seemed like an eternity I managed to get everything together for my first ever non rental game (big boy now) like a CM16 and a Titan battery to power it. Additionally a mate of mine said his kid wanted to play and had no idea where to start so we all went to Airsoft Plantation so I could show them what the deal was and make sure he liked it! It was a fairly safe bet, AP do a nice game day and the rental kit is always good. I was a little apprehensive playing without the reassurance of being able to just get any gun issues fixed like I did when I rented but I must say both the new gun and battery performed really well, when I checked the cells afterwards they were still way over 7.4v total and they could have gone longer if I’d have wanted to. All that said it the nerves were initially counterbalanced by only paying 25 quid for the walk on - much easier on the pocket! My mate and his lad had a great day too, even though it rained some the day wasn’t spoiled at all, we played some excellent set pieces at times and had really enjoyed the games. The battleaxe 200rd mid caps I had fed just fine too, highly recommended!
    1 point
  26. Druid799

    Gun picture thread

    Oh yes it does ! it counts from 95 down to zero its designed to use short Thompson mags of which the Hi-caps hold 200 . You fill the mag load it in start shooting it , it hits zero you pull the mag out a wee bit push it back in ,,,,,,,,,,,,AND it re-sets to 95 so basically you’ve got an accurate round counter ! 😍
    1 point
  27. Say it like it is. You mean porn lol. First thing that springs to mind is blackmail lol 😆 😂 Regards
    1 point
  28. Not me, but a mate after deciding to be a juggernaut
    1 point
  29. Barry08

    Scammer

    Scammer
    1 point
  30. Forgot to post about the actual game So this Sunday we were 8 on the field, cold, but clear morning. decided to run the kit I'm gonna be using on mid May's 21h event and I'm glad I did because now half the shit is gonna stay home I've reduced the number of mags from 6 to 3 (2+1), won't bring the mayflower rig but the TMR, will ditch the belt and will store the mk23 in my backpack until the night phase, where it will become my primary. I'm also bringing a larger pack, 9 litres might not be enough for water, clothes (waterproof top + fleece) and mk23+mags+gas. as far as the actual game, I had a big oof moment where I was defending and an attacker walked right past me without seeing me, I fired 4 shots with the mk23 and the first two hit the only fucking piece of shit sapling between us, the third zipped past his head and when the 4th was flying, he had already seen me so we traded kills -.- other than that it was a fun day, I enjoy low numbers way more than 20+ players days, I get way more space to move around and make plays and the low numbers (either 10 or 13) are what we have in tournaments, so it's good training in addition to much quicker games and the chance to teach new kids a thing or two.. this Sunday, for example, it was radio comms, when to use it, how to use it and how to set it up in a way where you can't accidentally operate the PTT so everyone can hear how much of a short breathed fuck you are Because literally, last time one guy had his rifle sling pushing on his PTT and all we heard was boars having an orgy. Next Sunday it'll be shooting back when being shot at, cuz I see way too many people duck in cover instead of fighting back lol
    1 point
  31. Where did you hear that? UKARA are a retailers association, not a governing body. The closest thing to a licence is the site membership us players use to buy new pews Edit. As a retailer you would need to join UKARA to access their database, however it's not a legal requirement for selling rifs
    1 point
  32. adam bussey

    Gun picture thread

    here's my beast
    1 point
  33. PopRocket123

    Gun picture thread

    That was mesmerising... Ah that's better. No more red. Although I was a little tempted to leave some of it as weathering
    1 point
  34. Since I'm no longer dressing up like a bush, I finally got snapped while playing! Weight loss loadout in its full glory because I've put 20 of the 45 kilos I originally lost back on thanks to stress eating over unemployment Even managed to use my GBBR AK instead of my NGRS 416, since my friend didn't want to use his last weekend so I could borrow his mags (I only have 1, he has 4, so 5 in total at 35 BBs each is usable). If I managed to lose 45kg before, surely I can lose 35kg now! I'm even going to the gym and healthy eating (again) and stuff 😮
    1 point
  35. I've done a few more modifications to the suit this week, hopefully I can get a few picture on the Weekend.
    1 point
  36. ak2m4

    TG Prices

    true, been looking more into importing directly myself last couple of weeks, just a small selection of RIF's, but in fairly large numbers. Importation prices seem to change on a weekly basis, that is you can find an agent who will ship Airsoft products.
    1 point
  37. It's been a few years since I've been on the forum so thought I'd do an updated loadout photo. Kit: SRC G-36KV with Ares front end, TM G22, old pair of Grafter boots, DPM combat 95s, Viper Lazer Special Ops Plate Carrier, Kombatuk dropleg holster, Bolle goggles and ASG face shield. I am contemplating replacing my DPM with a dark grey set of combats and also a new holster and helmet setup.
    1 point
  38. DerDer

    VFC FN FAL

    Was optimistic that we might see something at Shotshow or IWA but nada. At this stage we might see a VFC carl Gustav released before their FN FAL.
    1 point
  39. I have a record for having sex with celebrities. I also have a ban from Madam Tussauds.
    1 point
  40. Nick G

    Gun picture thread

    Posted it on the Lee Enfield thread, but what the hell ! S&T 303 now with a genuine front cap and my Father in law's old bayonet
    1 point
  41. Just thought I'd dress it up with bits I've already got. It needs a bigger scope, a more solid bipod and to get rid of the red paint. Then I think I just need a stronger spring and a couple of spare mags and it's ready to go to a game.
    1 point
  42. Any 1911 fans out there? Here's the latest build that I tried. It won't be replacing my glock for skirmishes anytime soon, but a cool build nonetheless.. Did you know people do bowling with 1911's? Apparently it's called "pin shooting" and there are specific styles of 1911's catered to that. Here's the post that inspired this build -> https://www.thearmorylife.com/bowling-with-a-pistol-a-guide-to-pin-shooting/ Wanted to get a short compensator like the real-steel examples in the article, but couldn't find any similar so I went with a 45" muzzle chamfer instead. With the looser tolerances of airsoft it doesn't look as blended to the bushing as RS, but I think I like it. I had to learn the hard way that stainless takes a lot longer than you think to grind out using hand tools...😅 In certain angles it makes the bore of the outer barrel look bigger than it actually is some real-steel examples that I referenced:
    1 point
  43. Took out my SVD yesterday for a test, and unfortunately it just wasn't running very well, even on 0.36s. It was windy, which didn't help, but even without that it just didn't seem to have much range or accuracy; I was struggling to make shots at even 50m. Going to have to go back to the drawing board and find a new bucking to use (and maybe barrel). Unfortunately, I only get chance to test it once I get to a site, so it's a long & slow process. 😩
    0 points
×
×
  • Create New...