Leaderboard

I have been skirmishing for five years and one thing I could never understand, is how people managed just using mid-caps. I had always gone in the opposite direction and still have drum mags for my M4's, Evo's and even Glock/AAP. Playing almost with the attitude that just keeping the opponents heads down was a victory, even if I had to light-up the wall they were behind or bush beside them. However last weekend I changed up my "rig" to include pouches for MP5/EVO mid-caps. Bearing in mind Evo mid-caps are 75 rounds, I was especially surprised that even after a heavy "defend the village" game, I had only just started on my second mag. I also discovered that I found it satisfying when the gun stopped firing on empty and I had to use the bolt release after inserting a new one. So I think I'll stick with them going forward and just pick my shots more carefully. What have you changed/learned recently?

Top tip from the weekend playing CQB at Gloucester prison - take a pistol sized speedloader full of BBs out with you and you have effectively doubled the number of mags you have for only a few grams extra! Easy to top up the mags on the walk to the respawn TBH one in the gun and two spare on the chest rig would have been plenty. It is amazing how far 35rds can go when you make each one count. I keep hearing about extra maintenance that GBBRs take. I timed my post game clean up (ignoring cleaning the barrel as AEGs need that too) and it was about 7mins. Much less faff than storage charging LiPos then recharging before the game!

With love,

When my site registered me I've received email to address I've used for my membership registration from [email protected], it looks like this:

Turn out that I just learned that somehow in 2021 folks are still using, and more worryingly recommending, 3 point slings. Get a 2 point with a quick adjustment tab (Slingster, Trex Arms, Vickers to name a few… I imagine there are clones too if you care to run that gauntlet) and enjoy the aforementioned benefits without any of the draw backs that come with a 3 point. I can think of only one time that it might be worth considering a 3 point and that if you’re hellbent on wanting an MP5 that’s correct to certain time periods. In this instance they’re still overly complicated piles of tangle wank, but at least ‘the look’ is right I guess 🤷🏻‍♂️.

Couple of random pics ofsome of my guns

Was doing some testing in the garden so thought i post my arsenal

All in all, I've probably had more 'negative' experiences with none HPA users since coming back then HPA users. You're very much correct, its about the person on the other end. Was just stating I hadn't met the stereotypical HPA user before.

Ahh, another cyclic topic by way of a change. It's nothing to do with the fact it's HPA, an AEG is entirely capable of that sort of overkill. The person using it is the problem, not the tool (though the person using it is evidently a tool, so that's fun). You're just leaning into a self fulfilling prophecy by assuming they're a wanker because they're using HPA, when infact, they're just a wanker. In terms of answering the question: That A2 carry handle receivers are a pain to find That TekLoks (or TekLok equivalents) are amazing in comparison to MOLLE if you switch your belt around a decent amount That ditching any sort of 'theme' to your kit and running what works for you (in my case currently jeans, t-shirt, softshell if I need it and whatever load bearing kit works for what I'm using) gives you so much freedom, which likely sounds really obvious but 🤷‍♂️

Like this one.. (Or the old stickers he has saying "Negative Airsoft thinks i'm a C$$T!"...

Set of surplus ESS V12 goggles for not a lot of beer tokens off a chap selling army kit on the mong , considering they are surplus and well under the price of new ones there condition could easily be listed as super grade if not ‘as new’ if bought from a retailer .

It's such a subjective question that any answer is largely moot, seems like you're ultimately trying to get folks to justify whatever decision you're leaning toward... which given the thread you've asked in is likely going to have a fairly biased leaning. So, trying to be objective. Things you'll loose: Mag capacity Being able to use fancy speedloaders without adapters (which often don't work) Being able to treat your mags like crap Having mags which are less than half a kilogram each A larger degree of control over shot to shot consistency in terms of FPS/Joules (depends how well maintained your NGRS is) Not having to worry about weather (that's not to say I've ever found weather to be an issue, but I've definitely had some cold mornings where the drive is spent praying the MWS will run right) Buying some decent batteries and that being a one off cost (assuming you look after them) Easy to source parts, both stock and aftermarket, in the UK Things you'll gain: More 'immersion' Being able to use more RS parts (with some needing modification to varying extents) Very expensive mags Heavy mags (I tend to advise moving to RS pouches/load bearing when moving to GBBRs due the mag weight... may not be necessary, but I certainly don't want a kit failure knackering a £50 mag) The ongoing cost of whatever you choose to power it with Having to order many of the parts you want, both stock and aftermarket, from abroad I'm sure there are more that hairs could be split over, but they feel like the big ones, it's largely 'mag centric' for me. You'll kinda have to pick your poison from there. FWIW I have both, and wouldn't want to be without either. Sometimes I just want a day of light 120 round mags, wang a battery in when I arrive on site and have at it. Sometimes I want to torture myself with 35 round mags and make up for it with a dose of GBBR ASMR. Sometimes I'll do one in the morning and swap over for the afternoon, so from my experience I'd hold onto the NGRS and just do a good ol' fashioned 'save up' for the MWS. But as I said at the top of the post... my opinion is entirely moot because I'm not you.

Very true. I like to run as support gunner. I use a 7.4V lipo and chug through BBs. The gearbox etc is well up to higher speeds/voltages; but I don't see the need to send a solid plastic hose at the other team. Two or three round bursts that hit solid cover with a loud smack are usually better at keeping peoples heads down than spraying a solid wall at where their faces may appear. Even if suppressing, you can keep things sensible, sporting and friendly. TBH I usually run my rifleman rifles with the 'fet set to single or double tap and spam the trigger a couple of times if a burst is needed. Kinder to the gearbox than semi and all you need 95% of the time.

👀 And on that note of an officially entirely detailed thread, I’ll go ahead and disappear.

Thats a gif i get it man, we all got guns we hate for no particular reason. Like how i hate ar stocks on non-ar's (ak's being most prevalent but not exclusive victim). I understand how it came to be, and why people do it, but i still just hate it. hmm, that could be an interesting thread.....

Its a fine weapon..... As long as you're ok with a trigger from a black and decker...... I preferr tactical tuna myself Also deleting smilies from a quote on mobile is basically impossible so, yeah, there's that..... If you've got the drop on them from a few feet and you're aiming for headshots might be part of the reason folk are getting annoyed, jus' puttin it out there. The evo got a lot of bad rep by a certain type of user sure (just like a lot of airsoft stuff) but in fairness it is pretty damn good and one of the few guns even a serial tinkerer like me would reccommend be left alone.

TTI triggers delivered and installed. Big difference over the stock ones even if I haven't adjusted the preload yet. DMR is a little mushy but I blame it on the gun having just a couple of mags under its belt, I reckon it'll get crispier with time

Damn it..done it again.. Not only did I buy a Glock today, I just went and bought a AK GBBR as well... Oh well... Baked beans on Toast till payday.

HPA Learned it’s awesome and a far more consistent way of running my GBB’s. I was showing off my mental ROF recently. I can get about 1 round per second with my KC-02 and with a 31rd magazine, that’s 31 seconds of fire power. Seriously though. Gas blow back is the way forwards and air is the way to power it

😁

I used the finest chinese knockoff sidewinder which feels like it's about to break on every turn but hasn't yet. They are tight to load but like most things loosen up a bit after use. (has the sweary guy on youtube ever said anything nice about airsoft stuff?) I use 11.1v simply because the 3 round burst shoots ever so slightly faster. The M904 isn't sluggish by any means on a 7.4v but you can tell the difference in 3 round burst speed when comparing the 2.

there isn't much difference in quality between cheap and expensive printers after you have dialed them in. Out the box the more expensive printers generally work better but a £200 printer can be tweaked to print just as well or better. There are 2 main types of 3D printers for the average joe. FDM and Resin being those 2 main types. FDM is a bit like squeezing toothpaste out a tube in 1 continuous line to make a 3D object where resin is very fine slices of resin stuck to the bottom of the last very fine line of resin. The main differences between the 2 is that resin has a much higher resolution so you don't generally see any print lines and it looks like it was moulded straight out the printer. FDM usually has print lines and you can print in finer detail so that these lines are less visible but that takes time so you have a choice to make between print quality and time to print. FDM printers can have bigger build plates up to 500mmx500mmx500mm generally but resin printers only manage about 192(L)mmx120(W)mmx240(H)mm for affordable models. both types can print in multiple materials so you have flexibility in making stuff. for instance you can print a rubber like butt pad in FDM or resin which will look and feel like rubber or you could print a silencer in ABS on a FDM printer if you are looking for strength. there is 2 other sides to 3D printing worth mentioning. If you don't learn a 3D design program you are stuck with printing other peoples models. Most programs are scary to look at when you first use them but a couple of youtube videos later it all makes sense. The other side is moulding from 3D printing. it's possible to design, print then cast in metal/2 part epoxy/gold/space dust a part. this is taking the 3D printing hobby a bit further but having a printer opens up that door. want a particular flash hider that doesn't exist or stupidly expensive? design it, print the prototype for testing then jam it in some plaster of paris and melt some old coke cans and pour.

This should be framed and mounted on the wall of every airsoft site in the country. if all played like this I’d be the original pig in shit ! 😁👍

Exactly the same situation with me , using a TM KSG at an outdoor/indoor site and it was a crappy overcast start to the day chrono’ed absolutely fine , late morning sun comes out and turns in to a right scorcher . I hit one of the marshals in error he says “that stung a bit ! think we need to re-chrono that ?” and it was well over site limits . Luckily for me it wasn’t long after they came out so it had a lot of attention at chrono and the marshal had actually had a go of it and shot his mate in the arse so was fully a where of its capabilities . AND I’d been playing a good few yrs by then so even ‘experienced’ players can fall foul of the variants of the hobbie . 👍

The thing is though, mandating something isn't the same as enforcing it. I've only ever had a tag checked once, and that was when I chronoed my G36 bare and then dressed it up in its lasgun costume, and - credit to the marshals - one came over to see what that was all about. I've been chronoed in game twice, both at the defunct Depot, and one of those would been avoidable because they assumed the aforementioned G36 was one of their rental guns, and I was honest enough to say otherwise. Both times they trusted me on BB weight, which was disappointing. I'll re-iterate that pre-game chronoing only deals with the players who aren't a problem. I wish it were otherwise, but there are some folk who deliberately or through wilful ignorance will take hot guns into the game. I don't mean accidental gas creep, but folk just not chronoing at all, or lying about BB weights, or modifying guns after chrono. The long barrelled Mk23s and Dan Wessons (using high power shells) I mentioned above were both caught hot in game at the Depot and blanket banned because of it. Although again, banning something is only the first step, and most chrono-dodging is invisible: you need to actually catch it in-game. It's more of an issue in CQB where you're more likely to get point blank shots, and you really don't want someone putting 2J of 0.4g into a mesh mask.

Agree with comments on mandatory chrono. Agreed with semi only rule and no blindfiring or prefiring. Experience from games at the Mall and Urban Assault show these to be very sensible rules for CQB. I would also copy the Malls rule about heavy metal reusable bangs. Another rule I liked was the usage of numbered armbands for ID purposes. Someone being a dick? Take their number, report it. Armbands being swapped from one arm to the other to signify being medic'd was another rule I always liked, can't remember what site it was from though.

So I haven’t sold my NGRS to get an MWS as I still have it as a safety net, but I can’t remember the last time I used it in anger. I have a number of MWS and they are so reliable all year round that the NGRS doesn’t get a look in. I actually started a thread about selling it and it will be on the chopping block as soon as I can dig out the box. That being said I personally would never go to a skirmish without a backup rifle. I’m time poor so don’t get to go to as many games as I would like so it would suck if a mechanical failure ended my day early. But that is as likely with electric as gas.

They're extremely well made and the BB gauge is a fantastic feature but in my experience, even when using a sidewinder style loader they're a bitch to fill much past the halfway mark.

Thank you all for all comments so far, incredibly helpful! Here is a link to the current rules list, it's not final nor in any particular order, just writing it as I think of things / things get mentioned. All feedback is very welcome and encouraged. https://docs.google.com/document/d/1ywLA_cuDyah09K6okAFq78eKRIZ8h-DVx3hX_LUYiaE/edit?usp=drivesdk

oh and as a follow up to my initial review I thought I'd mention that I've used it quite a bit since the review and it's still working flawlessly. I'm running it on a 11.1V most of the time and sticking to binary/3 round burst and had zero issues. I used it this weekend and the phrase someone shouted at me kinda sums this little AEG up. "I don't know what you are firing at me but it just scared the shit out of me!"

for BB brands, i use Valkyrie BBs, would be worth dropping them a line to see if they would be able to supply you in bulk. also, should be a hard no on ANY prefiring.. if they cant see what they are shooting, then hold fire. definately chrono all guns, even pistols for CQB, may also want to look into colored cable ties (tiny ones) or similar to tag guns, and alternate colours randomly so that its immediately obvious if someone hasnt chronoed their weapon on that particular game day (from what i have seen at sites, this would be a marmite issue, some players will love the idea, while others will loathe the idea, but at the end of the day its something that will keep everyone safe) random spot checks are a good safety measure too, and anyone found using a hot gun should be dealt with appropriately. but depending on the site itself, beware that great changes in temperature could cause gas guns to creep over the limits even if there are no alterations made, so in cases like that a player should be allowed to rechrono using a weaker gas, and if still over then use a different gun, a spare rental, or play without (if its a secondary) as some newer players might get caught unawares case in point was my EMG john wick hi-capa.. went to an (outdoors) site, and during the morning games i filled it with red gas, then as the day went on the temperature rose, so i was spot checked in the afternoon and the gun was shooting hot. due to inexperience, i didnt realise the temperature had had such a drastic effect on its performance. luckilly i hadnt used it in the afternoon games, and was close to safezone, the marshal had a small can of green gas on him, so he allowed me to re-gas with green and rechrono, and the gun was within the limits. after regassing all three mags i had on me, i was allowed to return to play, and at the same time i was educated very effectively about how temperature affects gas guns. i grant you, that this effect may not be as prevalent at CQB sites, but worth keeping in mind. of course, blatant cheats who chrono on green, but then regass with black gas, or players who get caught multiple times for the same offence should be sent home as its clear they are doing it on purpose

Haha yea, it'll be quite a while before I get to the purchasing stage so hopefully it'll all be sorted by then but if not I'll just get a smorgasbord of rentals and spin the variety as a feature. Any particular brands that you do rate, Elite Force seem popular? But will need to find a wholesale provider really. Vigilant, confident, fair, and consistent marshals will be a priority yea. And they are employees doing a job, if they're not good at it then yea they should be let go ( presuming they had all the required training beforehand that is ) Rules I'm thinking so far are semi only, hard limit on fps, no blindfiring, no prefiring ( unless it's just a legitimate tactic to stop someone popping their head around a door before you make a move ), chrono everything at the beginning with no excuses, random spot checks throughout the day ( particularly on known trouble gun models ) Will need to have marshals focus primarily on safety and from that hopefully a non-toxic and welcoming environment will able to be fostered and then yea from that if people are enjoying themselves and feel safe / listened to then hopefully that will remove a lot of the trouble. Noted, avoiding that brand then. Although I guess can't really police brands that players use but at least I can limit what I'm handing out to rentals.

Is this the RAF regiment’s kit update

Its called a reverse stretch and basically needs an MP5K Forend Grafting onto a full size A3 rear. It looks straight forward but is infact a major job, it's been on my project list for about 20 years now.

It's almost as if it's entirely subjective based on the element of the surprisingly diverse yet extremely niche hobby you enjoy most eh? Everytime this conversation comes up in a nutshell:

Was extremely fun day out at Ace Airsoft had a massive grin on my mush for most of the day right upto the point I went “arse-over-tit” coming out of the jungle - I didn’t know my legs could go up that high but by god it hurt when gravity too over - hip hit a root and right took a proper beasting. Just pleased that no one caught my gymnastics on camera /phew 😅 All of the Marshalls were awesome and kept checking on me - don’t worry guys it was my fault and I did sign the waiver Cant wait till next time out

So I finally got the proper early D-stock and pistol grip to finish off the XM16E1. Pictured with my original M1955 Flak Vest.

Unrelated to TG, but very much related to UPS. I ordered some bits not RIF related from Italy, turns out UPS are the courier. Dispatched on the 1st of June, arrived at Stanford-No-Hope on the 4th and outside of the sporadic import scans nothing has happened. So it would appear that the main issue, of which there have been many suggestions/hypothesis is entirely unrelated to the fact the parcels contain RIFs. Apologies if this only serves to make folks feel worse, but it's seemingly nothing to do with the fact it's airsoft stuff. UPS are just continuing to be worse than usual in general... and the bar was already pretty low.

Yup. I've had a visit from the old bill after buying a holster and a TLR1 torch from the states. Was kind of pathetic to be honest, they pitched up about 4 weeks after it'd been delivered. Knocked on the door asked if I had ordered the items and why, then just kinda wandered off.

you had to mention the weather..............

Mmm, airsofters are already delusional enough about the performance of our assault-toys without adding tangerine trees and marmalade skies into the mix.

Boneyard pulse rifle stripped , fixed and now weathered . I think it may need more “distressing” . And I need a couple more short mags .

fun filled day fitting a Jefftron Leviathan to my TM AK102.

Cyma CM041 HighSpeed finally finished (are they really ever finished?!) Short stroked 3teeth, new air nozzle, ML rubber and nub. Gate MERF mosfet in the stock along with a HUGE 7.4v nunchuck battery...and space left over!) Genuine MAGPUL fore end with TM grip and Olight Valkyrie torch. Vortex Crossfire red dot and a tritium vial on the front sight post for dark CQB / back up sights. Obligatory Spitfire tracer unit with Airtac blastwarden outer cover and Ferro Concepts single point slingster (as H&K hate left handed people!)

My first RIF, can't wait to field it this weekend 😍😁

New purchase arrived today

What's with this reloading nonsense? It has a bayonet for a reason! For the glory of the Soviet Union!