Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 12/09/22 in all areas

  1. MadMole

    How old is to old

    SussexMatt and 5 others reacted to MadMole for a topic

    58 here. With age comes wisdom. You dont need to run around like a teenager when you can out strategy them We play shoot em ups on the PC every Tuesday, us oldies, our sons and grandkids, they thrash us every week with their better reactions. So we took the youngsters to play airsoft. They were slaughtered!!, unfit, no tactics, not used to carrying a weight (a rifle is not like a mouse or game controller). In short it was a bit of a shock to them and great merryment was had by the dads
    6 points
  2. Darkmikey22

    Gun picture thread

    Skullchewer and 3 others reacted to Darkmikey22 for a topic

    Original STAR SA80 restored and turned into a 3 Para afghan 2008 look. Real handguard and hk stickers made for the rear. Susat painted worn, painted and worn again to give it the built up look. Still some weathering to do. But 90% done now.
    4 points
  3. RostokMcSpoons
    I can hold my own in Battlefield 4 TDM "Hold my own" "yub yub" I'm 55 and I've been off from footy for a couple of weeks, and haven't done an airsoft game since May. I may not make it out of the car park game (partly down to the insane amount of kit and guns I've accumulated and insist on taking)
    4 points
  4. rj1986
    Is it a charging handle?
    4 points
  5. Cr0-Magnon
    They're not even being subtle anymore, Kreuzotter is German for Viper....
    3 points
  6. Nick G

    How old is to old

    Rogerborg and one other reacted to Nick G for a topic

    I did some running yesterday, took out a sniper by just running at him firing (semi auto not hozing) once I was inside his MED he was toast 🤣 Then in the next game I scored a bang kill with my 249 by spinting around some cover to take out a lad who had us pinned down, spotted his mate a bit further away and lit him up . Some of my Old Git mates aren't talking to me now 'cos of the running thing 😭😂
    2 points
  7. JimFromHorsham
    One or two large blanket boxes , a couple of locks and a couple of cushions on top would be a ton of storage and extra seating for not a lot of money . flat pack Stuff like this is dirt cheap in places like homebase
    2 points
  8. clumpyedge
    Personally for me and depending on budget I would look at everything people have suggested however there are a couple of options people haven't mentioned. Peli make multi rifle lock boxes (this is a very expensive route) see the multi rifle case - this was just for reference but other models would accommodate 5 or 6 rifles. 5.11 also make the CAMS bag that has double or triple rifle (depending on the dimensions of the guns) underneath the main compartment. The main compartment has removable inserts to make it differing sizes which could potentially hold all of your surplus gear as well. This is also somewhat lockable if you use a few padlocks on the zips. This is also the better option in terms of footprint. 5.11 also make the SOMS (some of my shit) which is the smaller of the variant and without the under bag storage (I currently own a SOMS and its great for storing all my stuff minus guns and takes up the space on top of my wardrobe, if I organised it a bit better I could fit all my gear, my M4 and my MK46 in - Alas I am lazy). The CAMS or SOMS are a lot less conspicuous in terms of storage but also allow for better transport as they are both wheeled with extendable travel handle. Peli (or other rebrand) also have travel handles which would be useful for peace of mind if traveling to games that you aren't leaving your stuff at home. Looking at your list of guns the CAMS would easily store them all plus your gear (depending how much stuff you have obviously)
    2 points
  9. RostokMcSpoons
    ... not for long!
    2 points
  10. Tactical Pith Helmet
    I wish that fat people had an easier time of it. I mean, they've got a lot on their plates.
    2 points
  11. DerDer

    VFC FN FAL

    John_W and one other reacted to DerDer for a topic

    Fairly thorough video.
    2 points
  12. Rogerborg
    If I were hoping that someone might pay me eighteen hundred pounds for a toy gun and a sight that won't make it any more accurate than the cheapest Chinesium red dot at airsoft ranges with airsoft accuracy, I reckon I'd make a bit of an effort to come across as a reasonable chap who would be a pleasure do to business with. Of course, other opinions are available.
    2 points
  13. mightyjebus
    I used RIT dye to change some AK Mags and furniture from Black to Plum. It worked really well and I ended up with a Mid life Plum AK74. You could do the same using Black and it might take more than 1 application to get it completely back but worth a shot. It's a bit messy (hot water with the dye and leave to soak for 20 mins if I remeber correctly).
    2 points
  14. Nutster
    Right I shall start us off with my small but ever growing collection. For now all the guns are stock parts. First off my TM M14 socom: Galaxy MP5k PDW: JG MP5A4: Bell M1911 GBB: Finally the whole collection: Nutster
    1 point
  15. Pseudotectonic
    Got interested a few months ago but have not played a game yet. Mainly interested in the game play and tech side of things. Spent many hours watching Youtube videos and researching about gear boxes etc. Now wants to get a two-tone and do a budget build before first game. Also putting together a basic kit, already got eye-pro and pair of boots. Not high on budget so is after a simple kit that works well and is fun to play and tinker with, and easy to transport. Now I am based in west London and can only use public transport, Red 1 Chislehurst is around 1 hr 45 mins from me and seems to be a good site judging by reviews etc so I am thinking of going there to do my UKARA and do regular games afterwards. My biggest problem now is how do I lug my stuff around on the Tube and buses easily and without drawing attention? I don't imagine a backpack will be big enough and I would rather have everything on wheels so I don't exhaust myself before even reaching the site. Are wheeled duffel bags good? Any tips and tricks? Much thanks.
    1 point
  16. SSPKali

    THE TM MWS thread

    Emergencychimps reacted to SSPKali for a topic

    I tried the Madbull and AI metal adapters and never got them to work even with o-ring mod. Some people found the plastic AI adapters worked better. Unfortunately AI are no more so don’t know what a good choice would be. With ASG Ultrair being on offer and propane prices rising quite a bit I wasn’t going to save much if anything.
    1 point
  17. Shamal

    Tell Us a Gag. Please!

    Cannonfodder reacted to Shamal for a topic

    Stopped off at the pub on way home tonight for a quick pint of peroni. The barman put it on counter and I took a big swig and said "I shouldn't really be drinking this with what I've got" Barman said "I'm sorry to hear that,what have you got?" "£0.80 pence" I replied.
    1 point
  18. Shamal
    Hi @Pseudotectonic welcome to the asylum.🙂 Get yourself a padded rifle bag with lots of pockets and one that can be worn on back. You will find it fairly comfortable and can easily be slipped of and put between legs when on tube or bus and as far as anyone knows it could be holding a guitar or sports equipment. take a look on eBay or in the classifieds on this forum. if you want tips on gear and game play then I would advise to check out our very own @GAMBLEhe has a tube channel which will give you lots of advice on gear and gameplay. have fun,enjoy and call your hits! 👍 regards
    1 point
  19. Shamal
    Had me scratching my head all day. Didn't realise there was more. 😂
    1 point
  20. Steveocee
    Bought a couple of knick knacks....
    1 point
  21. Impulse
    Had a really interesting one this weekend. I mostly went to set up all my guns for AI500, as there's a BB weight limit of .28 and I won't be a cheater even though I suspect there will be other people breaking that rule. I set up my HK45 first, as I only had the two pistols with me and I didn't want to use the mk23 (which I was also going to set up for .28s for AI500), but I made the decision to also bring my KJW m700 to test. I wasn't expecting it to be great, as I've never used it and it was the first time I had taken it to the range. I thought it would chrono at 2J+ and then... it didn't. It was 1.5J on green gas and sending .48s into the sky. So I figured, "why not try 144a and see if I can get it under 1.1J? Maybe that'll also stop it sending the .48s into the sky" and as it turned out I was totally right. With the hop basically off and 144a now in the mag, it chronoed at 1J on the money with very low variance on a warm magazine that I kept in my pocket to make sure it didn't creep up in the midday sun. Lowest was 1.005 and highest was 1.009. Furthermore, it was sending the BBs out further than any of my other 1J builds, thanks in part because it was flinging .48s where my other 1J builds tend to be .32s or .4s at most. Was accurately hitting the 60m target with ease, and could even hit the 75m with some rifle tilting, so I decided that the VSR, which I had taken as the gun I was going to use, wouldn't even come out of the bag, all my HPA stuff remaining in the bags with it. Taking it out into the game it was clear it's going to need bedding in. The shots were consistent and accurate enough, but some of the shots would hop more and some would hop less every so often, but I'm not going to take it to the range and feed .48s through it for the sake of bedding it in because .48s are pricey! Managed to fit 3 mags total (2 in the belt, 1 in the gun), so I had a total of 84 shots which I managed to last all morning, going through about half of them. I absolutely loved it and will be using it for the foreseeable future as my main bolt action. Everyone says gas is crap for snipers, but damn this build proves naysayers wrong. No MED, can hit 75m as long as you know how much tilt you need. Also, the rifle wrap I use works amazingly well on it, since the magazine is where it should be and the wrap is designed for real rifles, unlike the VSR where the magazine is further forward than it should be because of how a sprig sniper works. I'm so happy with its performance. I didn't expect too much, because my HPA VSR was my magnum opus of bolt actions, but now it has competition!
    1 point
  22. Rogerborg
    That looks rather peculiar. So, is this being sold by KoA? Like, retail, with a warranty? Or is a customer gun that still there and he doesn't want / can't afford it, and they're happy to sell it on his behalf? I'm almost interested enough to ask.
    1 point
  23. EDcase
    I still find it very strange that no other companies have made a HP-MK3 considering how ubiquitous it was. But there are endless variations of less iconic pistols.
    1 point
  24. Kls77
    am I missing something here .......
    1 point
  25. Randymanpipe
    Thanks peeps, So, when I took the outer barrel end off (outer 2 parts) there was the smallest amount of wiggle play with the inner barrel like 0.5mm all round. I have wedged a tiny rubber O-ring in around the outside of the inner which now holds it rock solid. Will test again later and see if that has remedied, if not I'm guessing the next easiest fix would be to buy and fit an inner barrel that actually reaches the end of the outer barrel. Current is about 150mm short!
    1 point
  26. Adolf Hamster
    Sounds like a strong candidate. Certainly dramatic fliers left/right are most typically the bb striking something on the way out. Packing the inner to stop it wobbling in the outer might stop this (if the alignment is right might need packed a specific direction), and generally not a bad idea for accuracy anyway.
    1 point
  27. L1ct0r
    So, it's been a while but I'm done with holidays and the kids are back in school and I've finally had a chance to play. I ordered this stuff https://www.vinyldye.co.uk/All-Vinyl-Dye-Color-Sprays/TRG-Vinyl-Dye-Spray-Paint/Black-Vinyl-Dye-Plastic-Paint-By-TRG and a can of the Matt finish clear varnish https://www.vinyldye.co.uk/Matt-Clear-Spray-Varnish The gun is an Umarex Sportline UMP 45 and the upper is made from a blue polymer, rather than just a black one that has been sprayed. I stripped the gun and took all parts off the upper so it was just a bare polymer shell, then gave it a light sanding all over with a 400 grit wet and dry paper. After sanding I rinsed it off with warm water and an old tooth brush and then gave it a final wipe over with isopropyl alcohol (99%). I applied the black dye in several very light coats (maybe 5 or 6). building it up with 10-20 minutes drying time between coats. Once full coverage was achieved I left it for 2 days. The finish at this point was excellent, with no pooling in markings, and the original texture of the polymer surface was preserved. the colour was an excellent solid black, but the finish was noticeably gloss. After a couple of days to make sure it was well cured, I applied the matt finish today. Two light coats with about 10 minutes between. After letting it dry the finish was a very good match for the black polymer of the lower and the black folding stock. I would say on very close inspection you can notice a very slight difference between the original black parts and the re-sprayed upper but overall the results are excellent. I believe that it may just be a case of adding a final application of the matt finish, but I've got a good result as is, so I'm not going to risk going to far. The only minor issue I found was that I accidentally sprayed too heavily in one isolated area and the finish dried cloudy in that one area. Once it was no longer tacky to touch, I put little olive oil on a paper towel and buffed the cloudy area and it want back to black. Further buffing with an oil free towel removed the shine from the oil, but the cloudy effect did not return. I think this trick would not save the finish if you applied too heavily all over , but in limited areas that are just a bit to heavily coated it seems to work well to save the overall finish. I'll put some photos up when the varnish coat has also had a day or two to harden and I've re-assembled the gun.
    1 point
  28. Tactical Pith Helmet
    RPK inner barrels are often a fair bit shorter than the outer. The slightest misalignment can be amplified by the length. If removing the flash hider helped, I'd guess misalignment.
    1 point
  29. concretesnail
    Check for shorts but it's likely the mosfet is fried if its been smoking. The link you posted took me a set for a v3 gear box, the arp is a v2 gear box so that product won't work. If the etu is OK, then the mosfet replacement should be all that's needed, I'd not look at the g&g unit nut instead look for the perun mosfets. They do a plug in upgrade unit that is very good. Etu++ I think it's called.
    1 point
  30. Shamal

    I think my sons ARP9 dead :(

    Nick G reacted to Shamal for a topic

    Seems to me like you may have a short somewhere. I've never know batteries to 'spark' when connecting. 🤔 Check all the wiring for worn or bad insulation. Regards
    1 point
  31. Rogerborg
    Sorry to hear that. Did she find the receipts? (Too soon?) I'm not clear on what your priorities are. "Not on show" and "not too messy" sounds like you want them inside some sort of structure, rather than just bin bags and a tie-down strap holding them together. Do you care if it's secure? Are you after something more, or less, complicated than a Björk cupboard from Ikea?
    1 point
  32. MadMole
    I spray a bit of chrome silver paint onto a sheet of paper and lightly dab one of those kitchen sponges (small square with green scrubber on back) on the paint, then lightly brush the corners and wear points on the Rif with it. you can use the yellow side for full wear and the green fuzzy side for leas heavy wear Looks just like wear, but you can take it off if you do it wrong and looks less artificial than wire wool scratches, and it works fine on plastic TM's
    1 point
  33. GothicGhost

    Gun picture thread

    Skullchewer reacted to GothicGhost for a topic

    Graduation present for myself lol. TM Glock 26 with Nova kit. I prefer the back barrel.
    1 point
  34. Rogerborg

    Good Grief

    RobHedley reacted to Rogerborg for a topic

    It's why I gave up historic re-enactment. The groups I was in were always trending towards "professionalism", i.e. committing to providing clients with more numbers, bigger living history displays, and showier arena performances. It got to the point where we were prepping and loading vans days before big events, and staying on after weekends to tear down, as the chap running each group tried to turn it into a career. Me, I just wanted to eat hog roasts and swing swords. Airsoft needs more hog roasts!
    1 point
  35. Adolf Hamster
    As with any gearbox keep a good track of shims when taking it apart, then you wont need to re shim. The hardest part of a v3 (especially one with a qd mainspring) is getting the trigger in, i advise taking care when popping the halves to ensure it stays in the bottom half, hopefully it should stay put and you wont have to mess with it. Otherwise once its split changing the nozzle is no different to any other box. As @Skara says the cu nozzle should be a little tight on the cylinder head because of the sealing o ring, as long as it still moves ok under spring tension (a little grease around the cylinder head tube on installation helps) then it's a good thing as it'll boost the air seal and hence performance.
    1 point
  36. Skara
    V3 gearboxes are a pleasure to work with, swapping a nozzle is a relatively simple task. Take pictures of everything you do so you can backtrack when reassembling (or when you don't know where X bit goes), also be aware that the combat union nozzle is *TIGHT* against the cylinder head, doesn't affect performance but might be annoying.
    1 point
  37. Floperator
    Believe this was the thread:
    1 point
  38. Floperator
    There was someone on here a month or two back who dyed a couple of FNX slides. Believe it was pretty straightforward but some care was needed not to have the plastic slide touch the bottom of the pan or whatever container you're heating it in.
    1 point
  39. andrey

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • As new

    Glock 19 black: - frame vfc Glock 19 - hammer set full steel NewAge - hopup vfc - hopup wheel mapleleaf - inner barrel Poséidon 6,05mm - hopup rubber Poseidon 50* - frame pins Gunsmodify gold - trigger SAI (Salient Arms) black/gold Bomber Airsoft - magwell TTI (Taran Tactical innovation) Pro-Arms - slide TTI Pro-Arms alu 6061 - external barrel TTI Pro-Arms gold - mag release button PTS ZEV alu black - mag plate TTI Pro-Arms on a magazine + 1 original mag + 1 mag g17 CO2 - rear plate TTI Bomber Airsoft Price £290 all in Glock 17 bronze slide with RMR - frame Glock 22 Tokyo Marui - enhanced slide release button Gunsmodify silver - serial number plate alu Gunsmodify - frame pins Gunsmodify silver - trigger SAI Gunsmodify silver/black - hammer roller with ball bearing Gunsmodify - complete hopup chamber Mapleleaf - inner barrel Falcon inox 6,01 - hopup rubber Falcon green - slide Nova Statement Defense limited series (300 - external barrel Nova Statement Defense - RMR ace1arms - very good quality - greed fiber opric front sight - 1 magazine Marui Price £340 all in Glock 17 black frame slide FDE - frame Glock 17 Gunsmodify SAI + stippling and real markings Glock - frame Guarder - serial number plate alu Gunsmodify - enhanced slide release button Gunsmodify silver - extended magazine release button Guarder - frame pins Rainbow Titanium UAC - trigger SAI Gunsmodify black/gold - magwell SAI Gunsmodify black - steel sights SAI Gunsmodify with optical fibre - hopup chamber Marui + hopup wheel mapleleaf - inner barrel PDI 6,01 inox - hopup rubber Mapleleaf Autobot 50* - spring guide Gunsmodify steel gold - spring of the spring guide 125% Gunsmodify - hammer roller with ball bearing 8mm Bomber Airsoft made in japan - Full blowback housing Volante Airsoft with nozzle double stage with 5 gas routers. Short kick ultra fast and crisp with zero cooldown - 1 magazine with turbo valve Poseidon - external barrel Gunsmodify KKM precision rainbow titanium nitride with black thread protector DP Precision - slide Glock 17 SAI (Salient Arms) FDE Cerakote Guarder, the real Cerakote fde Price £360 all in SLIDES FROM TOP TO BOTTOM: - (without RMR) slide Nova Statement Defense limited series fde bronze, black outer barrel, RMR ready, ultra agressive cuts, for G17 marui & WE. £180 discontinued - slide Ace1arms Agency Arms 2.0 silver outer barrle with Agency markings, RMR ready, sights trijicon, blowbackhousing complet, for G17, G18 marui & WE. £180 discontinued - slide Guarder SAI black gold SAI outer barrel, steel sights 5KU with Glock RS markings, for G17 marui & WE, £80 - slide Gunsmodify SAI utility black rose gold SAI outer barrel, for G19 gen3 marui, £150 - slide Nova SAI black gold SAI outer barrel, Glock markings, for G19 vfc/stark arms, £130 - slide Gunsmodify SAI black gold SAI outer barrle, Gunsmodify steel sights SAI red optical fiber, for G26 marui, £130 - Gunsmodify black frame with Agency Arms cut, stippling ready as you wish the pattern, Glock markings, £60 My mate that wants to sell his toys, he is very passionate about it, hundreds of hours were spent to make this work flawless and without issues. The pistols are located in France, I will arrange the postage without issues, I have done this before on a constant time, it will take 2 weeks to arrive. Videos will be sent via Whatsapp before you buy, to prove all the above.

    £290

    - FR

    1 point
  40. Jambo88
    I like lidl.
    1 point
  41. Hin_1020
    stick with your WE then mate I’m sure it’s one of the best gbbrs on the market probably got an element on it thinking you’ve got a steal for 45 quid when it cost less than 10 on taobao 😂 oh probably sourcing that “uksf” impression kit from warrior assault systems as well🤡
    0 points
×
×
  • Create New...