Leaderboard

Ermmm, right there you fucking bellend

Fancied trying something new, my M4 got the brunt of it. Mad max style!

Will be honest I saw that and almost vom’ed in the back of my mouth it’s so hideous 🤢 but that’s the beauty of this sport , “what ever floats ya boat ? crack on !” 👍

@djben9 I relented and picked up a pre-owned ICS MP5A5 for £90-00!! Figured it can be my project gun for the next month or so; not that I've decided what to do to it yet!

Well after buying the IDZ stock off @Jayjay on these forums and spraying it up and mounting it on the G36 the Airsoft OCD went in to absolute meltdown ! 🤯 The scope mount was wrong , the suppressor was wrong ! 😱 So now it has the correct KAC QD suppressor on it , the scope riser isn’t ‘quite’ 100% correct but I can live with it (just about !) Hopefully this is the final appearance of my TM G36k KSK build ! 😁

Anyway you look at it, seriously who in their right mind would swap a TM 416D for a Specna 416C?

An as-val but close enough I may run a ps-01 or something similar when funds allow but there are more things to be done to it before then,

Just ordered the John Wick Conversion Kit... I shouldn't take days off, way too expensive as I had ordered a flashlight (Streamlight Protac HL-X 1000 lumen light inc. the Cloud Defensive Rail mount for the pressure pad) for the MWS this morning aswell 😭 No idea how I am going to explain this one to the missus, thank god she won't be home until later tonight.

@Crazy_Crystal There is always hope when there is money, just a waste of it. Whichever option I choose in the end though, everything I don't need is going up for sale, so soon on the classifieds: Either half an MWS or half a John Wick set 🤣 @Fissure I can only confirm that for the flash hider you need 1/2 28, that is the standard RS size, you can buy them on ebay fairly cheap (got mine from Germany, about 20 euro's shipped). The other ones I am not sure enough to answer your question. Just checked Brownell's UK https://www.brownells.co.uk/AR-15/M16-RECEIVER-TAPS-DIES-1250-18-tpi-Die-BROWNELLS-080598126

My next gun is going to be a KC02. But, with an sru bullpup kit. Exciting stuff.

Well, that would be down to the law of the land. An airsoft gun that is "capable of discharging a missile (of any kind) with kinetic energy at the muzzle of the weapon that exceeds the permitted level" [of] "in the case of a weapon which is capable of discharging two or more missiles successively without repeated pressure on the trigger, 1.3 joules;" http://www.legislation.gov.uk/ukpga/2017/3/section/125/enacted 1.3J is about 375 fps with a 0.2g BB. If it's capable of producing more than that, it's a section 5 firearm. Since you're so sure of yourself, you could get your local firearms unit round to check out out. Have a good old angry-man at them about how some spods on their interwebphones are talking jive while you rip off a 1.63J full auto burst. But being sold as full auto. We all know what you mean, but given that the wording of the statute is "capable of", and since you're much bigly smarterer than us, you might want to consider listing it as being locked to semi-auto. This is for your benefit, and that of any potential victim who buys that from you, not ours.

Because its reversible you moron. Its not permanently locked. The legal limit for a fully automatic RIF in this country is 370FPS. And like it or not thats what you have not a DMR.

1. Firstly there is no need to swear. 2. No, it doesn't. It says its capable of being locked via the selector/MOSFET. Capable of being locked and actually being locked are two different things. Either way a gun capable of doing 420FPS fully auto is illegal. Its reversible via the MOSFET. Have a nice day.

FECK OFF I know ! 😫😫😫

As politely as possible, fuck of with that shit 🤣

I have found a new hobby. Stalking Royal mail packages using the tracker. Its an amazing time waster 😄

Hi and welcome to the club! No tools are required to maintain as such but to strip parts, in the event you need to, you will likely need some screwdrivers, barrel nut tool, and a magazine valve tool. The width of the buffer tube is mil spec but the style of it is commercial spec - I have put a mil spec Magpul CTR stock on and it fits lovely! Most should fit, some might be wobbly or very tight. Trial and error. Its not real steel spec - has to be MWS specific, but PTS do a MWS Radian charging handle (have it on mine and its very nice) Yes. I have a Magpul K2 on mine - have to use the original MWS bolt. The thread on the receiver is AEG spec, so anything for an AEG should fit, but you will likely need to buy the barrel adapter for your barrel to work with an alternative setup. It replaces the rubber nub in the hop chamber - it gives stability - worth doing for lifting any weight.

I'm havng a few question and i hope someone can help me out. Which tools are a must have to maintain the MWS and the mags? Does any m4 style stock fit on the MWS's tube? Can you replace the charging handle with any real steel one like a raptor charging handle from radian weapons? And is it the same size as an ar15/m16? Can i fit any real steel pistolgrip to the MWS? Same as above for handguards Does the supernub make the gun shoot further with .28 aswel or is it only for use with heavier bb's? does it affect fps and what the hell does it actually do haha. where does it go in the gun? Some of these might seem dumb but it's my first gbbr. Thanks in advance guys!

He’s out of his mind.. £700 for a cyma. Might as well buy that 420 FPS specna arms 416c on here

Hmm, I don't know - TM build quality versus a load of "upgrades" done by a complete stranger, running 13:1 gears, 11.1v LiPo and no AOE correction? Where does the queue start?? 🤡

It's a plastic blade, and although I know some sites wouldnt as itsnot ultra flexible my local is okay long as you aren't jabbing them into people Check out this mp5 from Dave's Custom Airsoft

@UKCYukarin Aww man, the one on Gunfire was my fail safe if I couldn't find an upper haha, it isn't going my way. @Fissure Yeah a friend of mine re-threaded the lower so the lower is pretty much done for now. The filing needed for the trigger guard was fairly minimal but I did the filing on the lower instead of on the trigger guard. And about the barrel nut, I doubt it really, I'm definitely not going to try anyways (not that I have an upper to screw my barrel nut onto). What I did just finish though is re-threading my outer barrel extension to fit RS flash hiders :D. Took about 45-60 minutes to re-thread, slow and steady is the way to go and a lot of oil, a lot of it! The only annoying part is actually making sure the extension can not move in the vice and getting the thread started, fairly annoying keeping it straight at the start but once you actually start re-threading it centers itself. Just need to re-coat the extension. *EDIT* Added 2 pics of what it could look like, if it wasn't borked! *EDIT*

I thought that it was about time to share a photo of a few of my favourite RIFs 🙂

No, the south west. So essentially the same thing

He really should lock his FB profile down. All sorts of info on there someone less ethical than me could misuse......

You get what you give sweetheart, you posted on this thread being abusive now you’re crying about getting abuse back? Go cry to mummy. Gun can be had for €160 euros on gunfire, I know my maths is a bit shit but I put it closer to 250-300 based on 60% gun and 50% parts?

This is fuckin hilarious. True value of the gun when you offset the cost of parts removed to parts added is £335/350 second hand (on a good day) so £400 is not a actually a million miles away compared to some adverts on here lately. But @Dan Quadling the hostility is off the charts so chill the fuck out and explain your advert error instead of just chucking your teddies.

Enjoy your ban.

Hey, don't grammar nazi me, I'm your fuhrer

In case you hadn't noticed thats the very purpose of this thread. Also, accepted wisdom is that once something is used/secondhand then you are not going to get what you paid for it. Its called depreciation. You wouldn't expect to pay full retail value for your car if its 3 years old, with a load of upgrades you can't attest the veracity of. So why should people pay full asking price for your second hand AEG with a load of 'upgrades'. Noone cares what they cost, you will not get full RRP.

I see this thread has taken a return to form after our breif interlude with briareous

Full retail? Are you a mong or something😂 you can pick it here up for £200ish new, considering the upgrades and accessories etc it’s worth £400 all day long. Stop getting your jollies off on a public forum

Plus, @Briareos, yours looks much nicer. Love the stock on yours. Never found the appeal of uninspired camo paintjobs, where it looks like the gun was used as the underlay for several other spray jobs.

One of these (IDZ stock) to continue my ever on going KSK project from the fine gentlemen that is jayjay on these very forums !👍

No, yours is an example of how over priced the other one is. A far superior gun (yours) or inferior for more money, that’s the comparison being made

Not quite sure if I have enough shotguns for my shells, or shells for my shotguns I love my shotguns so the expansion only expands, it's all I run so please, feel free to judge me

All fitted and looking low profile. Took no time at all but make sure you have some very small punches to pop the pins bout of the foresight. I co-witnessed the holosight before removing the front and rear iron sights so it should be pretty close to sighted. Off the the UCAP Bunker in Portsmouth tonight so it will be the first skirmish with the MWS!! Exciting!

LCT AS Val, I've tried to make it look weathered, needs a little more effort before it looks how I want it, but close enough. I used photos of the real Vals to get a realistic wear. By far the best RIF I've ever owned

Just to trigger the Airsoft OCD some more the scope rail is the original and not the IDZ one too 😜

Maybe you can understand this........ You are a mong, to the highest degree

Not if it’s mechanically lockable you fucking quiff, which it is😂 Don’t tell me what I do and don’t have by sitting behind a phone screen. Absolute flid😂

Firstly, I can do and say what I like. Secondly, how on earth is a gun capable of 420fps illegal😂 absolute retard, local airsoft sites to me have a 420fps DMR limit, so go take your head for a shit👋 Have a a nice day They are around that sort of price yes, but with the upgrades and accessories I think £400 is more than reasonable

Wish you cunts would read the ad. If you read the ad you illiterate cunt, you’ll see it states a DMR that’s locked