Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 16/05/19 in all areas

  1. Ermmm, right there you fucking bellend
    5 points
  2. Well, that would be down to the law of the land. An airsoft gun that is "capable of discharging a missile (of any kind) with kinetic energy at the muzzle of the weapon that exceeds the permitted level" [of] "in the case of a weapon which is capable of discharging two or more missiles successively without repeated pressure on the trigger, 1.3 joules;" http://www.legislation.gov.uk/ukpga/2017/3/section/125/enacted 1.3J is about 375 fps with a 0.2g BB. If it's capable of producing more than that, it's a section 5 firearm. Since you're so sure of yourself, you could get your local firearms unit round to check out out. Have a good old angry-man at them about how some spods on their interwebphones are talking jive while you rip off a 1.63J full auto burst. But being sold as full auto. We all know what you mean, but given that the wording of the statute is "capable of", and since you're much bigly smarterer than us, you might want to consider listing it as being locked to semi-auto. This is for your benefit, and that of any potential victim who buys that from you, not ours.
    4 points
  3. lol, every village has one, apparently forums are allowed more than one šŸ˜‰. this will be the limit if my involvement on this one, I don't have the patience šŸ˜ 
    4 points
  4. I see this thread has taken a return to form after our breif interlude with briareous
    4 points
  5. Well after buying the IDZ stock off @Jayjay on these forums and spraying it up and mounting it on the G36 the Airsoft OCD went in to absolute meltdown ! šŸ¤Æ The scope mount was wrong , the suppressor was wrong ! šŸ˜± So now it has the correct KAC QD suppressor on it , the scope riser isnā€™t ā€˜quiteā€™ 100% correct but I can live with it (just about !) Hopefully this is the final appearance of my TM G36k KSK build ! šŸ˜
    2 points
  6. Hmm, I don't know - TM build quality versus a load of "upgrades" done by a complete stranger, running 13:1 gears, 11.1v LiPo and no AOE correction? Where does the queue start?? šŸ¤”
    2 points
  7. Moderator message Actually, no you cannot. Please (re)read forum rules, specifically Be nice to other forum usersTreat others as you would like to be treated to yourself. There is absolutely no need to be abusive on these forums.
    2 points
  8. So not only are you an abusive idiot, you are an abusive idiot who can't even read his own advert? It says Ā£500 in the advert panel on the right and Ā£400 in the text. At either price point its not worth it.
    2 points
  9. Because its reversible you moron. Its not permanently locked. The legal limit for a fully automatic RIF in this country is 370FPS. And like it or not thats what you have not a DMR.
    2 points
  10. 1. Firstly there is no need to swear. 2. No, it doesn't. It says its capable of being locked via the selector/MOSFET. Capable of being locked and actually being locked are two different things. Either way a gun capable of doing 420FPS fully auto is illegal. Its reversible via the MOSFET. Have a nice day.
    2 points
  11. On their frickin heads
    2 points
  12. some Pencott items off Military 1st, always been tempted and with 15% off i thought i may as well...... now need to put in loft with other stuff and not use for several months!
    2 points
  13. Bit of a shopping spree for me Maple leaf crazy jet 550mm inner barrel Maple leaf Autobot 75 degree bucking Action army Hop up chamber for the Striker fancy cocking handle for the striker Thread adaptor One fancy suppressor A spiral outer barrel for the striker I will make sure to post pictures of the final build if it all manages to arrive from god knows where
    2 points
  14. Another plus point is the seller is not a cockwomble
    2 points
  15. if he knows so much & is so "aware" of prices etc due to where he admins, what's he doing here, piss off back to his page & flog it there, & take his arrogant arsey attitude with him šŸ˜œ
    2 points
  16. You I would trust (god help me), TM I would trust, Mr Angry not so much.
    1 point
  17. Just to point out TM build quality is just cheaply made parts assembled by a low paid complete stranger who might have woke up that morning hung over and hating the world. Personally if new I would buy a specna, as for a lot less money I can put together a gun that out performs a TM on every front.
    1 point
  18. Hahahahaha ! Well played good sir ! Well played indeed .šŸ‘
    1 point
  19. Heā€™s out of his mind.. Ā£700 for a cyma. Might as well buy that 420 FPS specna arms 416c on here
    1 point
  20. It's a plastic blade, and although I know some sites wouldnt as itsnot ultra flexible my local is okay long as you aren't jabbing them into people Check out this mp5 from Dave's Custom Airsoft
    1 point
  21. LVOA-D

    THE TM MWS thread

    @UKCYukarin Aww man, the one on Gunfire was my fail safe if I couldn't find an upper haha, it isn't going my way. @Fissure Yeah a friend of mine re-threaded the lower so the lower is pretty much done for now. The filing needed for the trigger guard was fairly minimal but I did the filing on the lower instead of on the trigger guard. And about the barrel nut, I doubt it really, I'm definitely not going to try anyways (not that I have an upper to screw my barrel nut onto). What I did just finish though is re-threading my outer barrel extension to fit RS flash hiders :D. Took about 45-60 minutes to re-thread, slow and steady is the way to go and a lot of oil, a lot of it! The only annoying part is actually making sure the extension can not move in the vice and getting the thread started, fairly annoying keeping it straight at the start but once you actually start re-threading it centers itself. Just need to re-coat the extension. *EDIT* Added 2 pics of what it could look like, if it wasn't borked! *EDIT*
    1 point
  22. I thought that it was about time to share a photo of a few of my favourite RIFs šŸ™‚
    1 point
  23. You get what you give sweetheart, you posted on this thread being abusive now youā€™re crying about getting abuse back? Go cry to mummy. Gun can be had for ā‚¬160 euros on gunfire, I know my maths is a bit shit but I put it closer to 250-300 based on 60% gun and 50% parts?
    1 point
  24. So I bought a crazy jet barrel which said "6.01". I thought, maybe it was a typo. It genuinely is a 6.01 crazy jet barrel wtf...
    1 point
  25. *Looks at m203* Yep, can confirm anything is fun when launched from a 203.....
    1 point
  26. This is fuckin hilarious. True value of the gun when you offset the cost of parts removed to parts added is Ā£335/350 second hand (on a good day) so Ā£400 is not a actually a million miles away compared to some adverts on here lately. But @Dan Quadling the hostility is off the charts so chill the fuck out and explain your advert error instead of just chucking your teddies.
    1 point
  27. Ahh abuse, the last refuge of someone losing an argument. Just a reminder: (from the Rules section): Be nice to other forum usersTreat others as you would like to be treated to yourself. There is absolutely no need to be abusive on these forums. If you are then your posts / topics will be edited or deleted, you may be given a warning, you may get your account suspended, and persistent offenders will be banned. Bye bye
    1 point
  28. Hey, don't grammar nazi me, I'm your fuhrer
    1 point
  29. In case you hadn't noticed thats the very purpose of this thread. Also, accepted wisdom is that once something is used/secondhand then you are not going to get what you paid for it. Its called depreciation. You wouldn't expect to pay full retail value for your car if its 3 years old, with a load of upgrades you can't attest the veracity of. So why should people pay full asking price for your second hand AEG with a load of 'upgrades'. Noone cares what they cost, you will not get full RRP.
    1 point
  30. Wish you cunts would read the ad. If you read the ad you illiterate cunt, youā€™ll see it states a DMR thatā€™s locked
    1 point
  31. Specna arms 416ā€™s are Ā£200 new arenā€™t they?
    1 point
  32. Only issue is its a LONG way to Kent Ohio, in the US to collect it
    1 point
  33. Donā€™t get too excited , Iā€™m sure weā€™ll find SOMETHING to rip you apart over ! šŸ˜± šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£ šŸ‘
    1 point
  34. Ah thanks chaps, much appreciated šŸ‘šŸ» making me blush :p
    1 point
  35. Plus, @Briareos, yours looks much nicer. Love the stock on yours. Never found the appeal of uninspired camo paintjobs, where it looks like the gun was used as the underlay for several other spray jobs.
    1 point
  36. One of these (IDZ stock) to continue my ever on going KSK project from the fine gentlemen that is jayjay on these very forums !šŸ‘
    1 point
  37. No, yours is an example of how over priced the other one is. A far superior gun (yours) or inferior for more money, thatā€™s the comparison being made
    1 point
  38. If they have any of the millary training smokes (big green metal canister) there about 8-9 quid a pop, but they shit on every other smoke grenade I've used. Definaly worth getting one just to see how effective they are. But it looks like we could get a small asfuk Cambridgeshire group going
    1 point
  39. ImTriggerHappy

    THE TM MWS thread

    Airsoft metres are a magical thing they single handedly prove wormhole theory.
    1 point
  40. Not quite sure if I have enough shotguns for my shells, or shells for my shotguns I love my shotguns so the expansion only expands, it's all I run so please, feel free to judge me
    1 point
  41. wire2k

    Gun picture thread

    My first RIF G&G GC16 Predator. Skirmished a few times and so far very happy with it. Plan to add a mock suppressor once I figure out what will fit with the rail and maybe a snake skin paint job in the far future.
    1 point
  42. My good lady paid for a minty 2009 dated DPCU softshell for me.
    1 point
  43. Bought 2 weeks ago but finally arrived, my Ready Fighter Loki Tactical Neo RMR slide for my TM G18c! After a terrible day yesterday, today is a good day šŸ˜€
    1 point
  44. Yep, I bought another Elcan SpectreDR 1-4x w/ red dot & killflash. This is about the 7th once I've had, so I should probably just hold on to it or I'll inevitably buy another one down the line.
    1 point
  45. Delgado900

    Gun picture thread

    Specna Arms H-05 really happy with this rifle. Skirmishing this weekend hope Iā€™m still happy after Sunday. WE T-Rex Hi Capa with an osprey šŸ˜Ž
    1 point
  46. Not at all. Your criticisms are entirely valid and I accept that. But you've oddly mistaken a rebuttal for something it just isn't. You're free to openly criticise my post in this thread, just as I'm allowed to reply to said criticism. I've taken what you've said (and Rogerborg) on board and reduced the price. So I do appreciate that. There's not much else to it, if you were expecting a hissy fit then I'm afraid we're at an impasse. Hopefully the next person will prove more entertaining?
    1 point
  47. Nothing fancy, but new pistol arrived today
    1 point
  48. E21A

    Gun picture thread

    DMR ready for some testing on Sunday
    1 point
  49. Druid799

    Gun picture thread

    TM recoil G36k KSK inspired build complete (for now anyway, may get an IDZ stock or may not) ! happy chap .šŸ˜
    1 point
  50. The inspiration for this one came from listening to the amazing audio book "World War Z" (nothing like the movie) where Alpha Teams were dropped in to rally pockets of survivors and work on building back communities. The idea is this is one of the survivors that the teams are helping so he has a mixture of civilian, military and law enforcement kit.
    1 point
Ɨ
Ɨ
  • Create New...