Leaderboard

This here is why I shouldn't be given mod duties. I would've yeeted him ages ago for being a serial cockwomble

£449 from DK Armaments new for the rifle, then £123 off Amazon for the SUSAT makes £572 in my book…

And buying it that way probably comes with some sort of warranty...

HK53 is next on my hit list 😎

Definitely deserves a spot here. I'd like to know where he got the £330 from, a quick google search has them listed between £200 and £260 from UK shops

Ready for some Gunman 'Namsoft in June. Love a weekend of shooting at GIs with their own guns, but this time I actually have mags for the AKM, so that's coming too

Hi. My rubber recoild buffer has crumbled and I need to replace it. Can't find any places online where this element would be available and even in the manual it is not specified separately. So need to make my own. Now what material could I use? Do you have any advice what easily available material I can buy to cut the recoil buffer? Thank you.

Oh dear This makes my Pee-Pee tingle 😎 0

Afternoon all, have a like new, North East STEN SOE Welsilencer version that I may be looking to part with, not a mark on it apart from a small mark on the bolt carrier, boxed with all documentation. What's the going price on one of these now that they are discontinued? Cheers in advance!

Please sir may I have another?

As the owner of a G3 and FAL I can only say, get the FAL over the G3. Both are excellent but the FAL edges it

TM vs. VFC MP7: TM is 90% of the real deal's size meanwhile VFC is 1:1. Biggest issue is that the whole gun is polymer and that recoil constantly bashes against the rear. Altough you can buy some aftermarket stock adapters and stocks to make it more rigid (which I did). But at that point you spent close to 400 pounds just on the gun...(if new) Internally vfc has been made to run it on gg Marui should be run on duster at least on paper. But I bet most people run their TM on gg anyway and having minimal amount of issues except usual wear and tear like broken nozzle but that's airsoft for you. VFC Rattler/MPX: Both are sexy plus you don't see them that often but there is minimal amount of info about them. Watched every yt review available and they seem solid internally but every gun is fine out of the box and longevity is a different topic. They are just too new to able to form an opinion. VFC MP5: Never had one but according to other people internals are made of out chocolate easily braking charging handle etc. New gen. may be better but who knows? VFC HK53: Too new buy it on your own risk. TM MWS: Never had one but it seems the king of all GBBR M4's. GHK used to be a serious competitor but since QC issues no one would recommend them. TM AKX: It's an just TM AKM with modern furniture. Personally I wouldn't pay almost 200 pounds more for it but it's your money and value is subjective.

Ive got the Umarex (VFC?) MP7 and its awesome. I regularly run it in the woods it's got plenty of range . Also have a WE L85 which is fun , but tbh I find the bulpup thing a bit awkward as I'm used to mags being furyher forward.

Mystery solved . There is a spring in the gas block wich I lost and found 😉 Use blue loctide and just a small amount . It's going to be fine . Make sure you use good quality screwdrivers and you will be fine . I totally disassembled mine with no issues and no damage .

I did not have any issues with the hop . Stayed in place . Mine is rock solid at the moment. Tempted to run it on .32 Changed the hop bucking for Maple Leaf Autobot 2021. And I think I can see improvement. There is the occasional stray shot but 8 out of 10 are in the beer Can at 40m. Think of getting the inner Barrel changed for the Crazy jet . 🤔 Any one has some experience with those ? Question. Is your fake piston rod moving freely so it kind of rattles when you run ?. I swer that there is something that I assembled wrong as I did not noticed that .

Go Outdoors do them - about £10 - pointless though as propane will kill your seals unless you lube religiously.

Good luck, you crack open a perfectly fine ARP9 to install those bits, unless done by a really good tech you'll have months of issues and ultimately end up replacing it. Even then, a good tech will advise against most of them. Those parts are shiny to attract the unsuspecting youth magpies. Heres actually a better idea - get him a polarstar jack and HPA setup. Power will be adjustable, ROF will be crazy if it's tuned by even a simpleton, has the cool HPA factor and will be a lot more reliable than a teenagers pick list of shiny bits.

some more airsoft pics.

You will need a lipo charger, but luckily most good chargers that are used for lipo packs will do other chemistries too. As for the rhe bags. I don't rate them at all. They aren't fire proof, and they don't filter fumes in the event of a pop. If you're worried about having them in the house then that's OK, in have seen big lipos go and it's not for everyone. However if you treat them well, charge in a sensible way and don't over discharge point there's not reason it should fail. There's plenty of lipo advise about the forum, on chargers and setups etc. But if you're unsure just ask.

Did you put the Tappet plate spring back properly? I have a thread about my adventures with a v2 gearbox and that was the cause of my investigations.

I'm not super paranoid about lipos, but I do pop them into a ceramic Explosion Containment Pie Dish while charging.

The device could be a cardboard box 🤣

Hi, ALL! 👋 Made a late choice to play tomorrow at Reforger, first time back this year and hopefully catch up with some players and might see anyone on here, who reads this? 🔫😎👍 💷GAMBLE💷

So £330 for the rifle and £15 for the lipo - £345 So 2/3 puts it more like £228 So about £100 over priced, unless I'm missing something?

Fixed the nozzle! Seems to be holding up nicely at today's game🤞🤞🤞

Stick em in here: Parts - Airsoft Forums UK (airsoft-forums.uk) Can you post lithium batteries with Royal Mail? Packaging guidelines: Each parcel must contain no more than four cells or two batteries installed in a device. For lithium ion/polymer batteries the Watt-hour rating must not exceed 20Wh per cell or 100Wh per battery. A standard 1300mAh 7.4v works out to 9.62Wh and your battery is 22.2Wh so all airsoft batteries are well within limits

Cobray Terminator. Needs parkerising still and markings added. But legitimately my new cqb toy.

Getting there with my long AK/Romy Paratrooper RPK build. Added the dong handgrip (bought from firesupport) the current upper handguard is off my AK47, I'll keep my eye out to find one that matches the lower in colour. Next is to swap the receiver on my AK from side folder to under folder (always wanted one)

So, after proving it works by having an enemy squad walk past me so close I could have reached out and touched them, here's my completed ghillie loadout. The base layer is a Jack Pyke LLCS suit in British Oak. Goggles are some random mesh brand, viper if I recall, sprayed with krylon over masking tape. I then cut a piece of camo cloth mesh to shape and glued it to the frame of the goggles. The main cape is one of those mesh ones you see on all the airsoft sites, with the detachable hood. Got them both on fleabay for bugger all. I bought several packs of various leaves from Hidden Airsoft which I attached with brown cable ties. I added cheap plastic fern leaves and vines from amazon which I dusted over with krylon. For a little extra outline break up I cut up an old pair of British woodland camo trousers and tied on the strips, then did the same with an old camo poncho. The results definitely work. Not overly expensive, just a bit time consuming.

The British Forces Collection family updated..... Row 1. Row 2. Row 3 L115A3. L108A1. L7A2 GPMG L86A2. L119A1 CQB. L100A1 (G3) L85A2 UGL. L119A1 SFW. L91A1 (A3) L85A2 TES. Model 723. L92A1 (SD) L85A2. Model 715. L128A1 L22A2. L1A1 SLR. L74A1 LAW 66 Pistols L9A1 (hi power) L105A1 (sas crw P226) L105A2 (UOR P226) L131A1 (gen 4 glock)

Last build 👌still waiting for sig stock 😩

a couple of TM's

Think I have both style mags in AK parts bin if intrested pal

Where it all started in the mid 90's, there were more but I surrendered them all to the police after the Dunblane massacre. & Where my collection is now, replicas, props & airsoft (mainly AEG's) with room for more. Forgot I have a G36, Scar & a Glock 17 packed up for a skirmish in early June. I've also got manequins ktted out with Uniform & Pattern 58 webbing (styled as how I wore it in the TA in the early 90's), one with PLCE etc from the 2000's, one with DDPM from the 2010's & a growing collection of webbing from pattern 58 to modern day including bergens.

A bit more bush larp from the weekend just gone.

Building this for a pal ( not keen on the grips but all we had to hand )

Looks great. I done the same many years ago to a novak 1911 with vfc tac light. Looked amazing.

Is this sight setup overly ridiculous

Random 1911 but I like it

Very much a WIP but a Cobray Terminator for Cam 870 and madbull/pps shells.

First time spraying my rifle, I think I will be spraying the rest of my collection now👀

Hey, I want to introduce you to a personal friend of mine... Peak nerd.

Just putting parts won't make it a good gun and Maxx hop units are over priced crap ( well they are not craply made they are built to too high a tolerance and so won't work in most airsoft guns with out modification and the stock G&G plastic hop unit is a good hop).