BADGERF1ST

My custom Kimber Desert Warrior in flat dark earth. Has an Army Armament full metal frame and slide with Marui internals. External parts are Army Armament including the frame, slide, trigger, outer barrel, sights and hammer. Internal parts are all Marui, inner barrel, recoil spring, hop unit, nozzle, piston, hammer strut, hammer spring, sears, disconnect etc. The only exception is the nozzle housing, which is the Army housing. Also fitted are a pair of genuine Magpul 1911 grips with Guarder steel hex head grip screws. Boxed with manual and magazine/barrel spacer tool and comes with 2x Army Armament MEU style green gas magazines, both gas tight, a 12mm to 14mm CCW thread adapter with thread protector and an Angry Gun 1911 power up suppressor. In good, working condition with no gremlins and only minor wear marks. Looking for £160 including postage via ParcelForce 48.

Brand new Acetech AT2000R tracer unit, taken out of an Angry Gun socom 7.62 suppressor, selling as tracers aren't my thing and the only one I could find in stock in the UK included the tracer unit. Will come with the manual, cable, and the retaining bits to hold it in place in the suppressor. £50 including postage.

Basically cobbled together with spare parts I had laying around, full metal bodied Kimber Warrior with full trades, two tone blue black. Would make a reasonable starter side arm. Army Armament frame, slide and internals, with a Marui 1911 grip safety, trigger bar and trigger, hammer, safety catch, slide release and 1x non leaky Marui 1911 magazine. Only issue I've found is that the slide catch is a little temperamental, sometimes it locks back, sometimes it doesn't, and there's a bit of a scuff on the right hand side of the slide. Looking for £55 including UK postage.

Brand new Vorsk Agency VX-9 Silverballers limited edition twin pack. Bit of a spur of the moment lockdown purchase, not had a round through them, just sat on display next to my WA2000 in my games room since purchase. The pistols are full metal, have real wood and rubber grips, each has a removable silencer and also an extended inner barrel that runs the length of the silencer, which can also be unscrewed should you wish to run them un-suppressed. Each pistol also comes with one standard magazine, and one extended magazine. There is also a spare recoil spring, nozzle, bag of o rings, magazine/barrel retainer tool and rubber Vorsk patch for each pistol. Wanting £250, including UK postage via ParcelForce 48.

Wanting a decent condition black EGLM with SCAR H trigger / magwell. Cash waiting, thanks.

Wanting a decent condition black ACR stock and adapter for my VFC SCAR H, either the Angry Gun or Renegade one will do. Cash waiting, thanks.

Looking for a good condition 4.5 inch barrel extension for my VFC SCAR H, the one included with the WE SCAR H would be perfect if anyone has a spare. Cash waiting, thanks.

looking for a Renegade SC stock and mount plate for the VFC Scar H GBBR series. Will also consider the full SC conversion kit if anyone has one please. Cash waiting.

After a 1x - 4x magnification Elcan Spectre, with or without DR sight, with trademarks in black if anyone has one for sale please. Cash waiting. Cheers.

Looking for a good condition, fully working WE Scar H gas blow back, preferably with a few upgrades and or magazines etc, but will consider anything.

In desperate need of the detent housing assembly for a Marui compatible 1911, please see picture for part required. needed ASAP if someone has a spare, cash waiting.

In desperate need of a Hurricane/Airsoft Surgeon/ Guarder/Tanio Koba slide guide/spacer for the metal Kimber Warrior kit, I've recently come into a TM based Hurricane bodied Warrior, however the slide keeps trying to eject itself from the frame due to the slide rail guide spacer not being present. Needed ASAP if anyone has a spare or knows of where actually has one in stock.

As above, looking for either a Mafioso or RA-Tech steel slide kit and an Aurora blow back unit for a KWA MK.23 Socom. Thanks.

KWA Kriss vector package. The rifle itself is in good overall condition with very few marks, has been well maintained and shoots as it should, no mechanical issues. Internally it is fitted with a RA-Tech hard kick kit and RA-Tech RSD Evo II hop unit (this will need bedding in as it's not been used since fitting), comes with the Evo II long 6.01 barrel but this is unfitted as I wanted the option of removing the suppressor without having the inner barrel sticking out. Also comes with an unfitted 3D printed gen 2 style pivoting trigger kit, and a pair of unfitted power down valves should it need them, I never had it chronoed so bought them just in case. Externally it has a Speed airsoft magazine catch for easy reloading, defiance flip up irons, Magpul style foregrip, Inforce style rail mounted torch, G&P internally housed laser with pressure pad, Genuine Kriss Vector hand stop, grip plate and stock adaptor imported from the US, Magpul UBR stock with full trades and an Angry Gun QD sling mount. Also comes with an Angry Gun power up suppressor, custom flash hider, Eotech 552 replica and G&P AP red dot sight. A total of 6 magazines, all gas tight and without damage are included, as are ALL original parts (folding stock, foregrip, laser housing plug, barrel thread protector, iron sights, grip plate, hop adjustment tool), extra cheek weld for the Magpul stock, box and manual, and will also throw in a pair of dual molle magazine pouches I had made specifically for the Vector magazines. I'm really not in a hurry to get rid of this so no stupid offers, no splits and no swaps please. £1100 gets you the lot, including UK shipping and PayPal fees. Any questions please feel free to ask.

Galaxy Barrett M82 that I have styled to resemble the M107A1. Main body is ABS with metal barrel and internals. Originally a solid colour with plastic M82 styled flash hider, I went for a tan and black set up by buying the 2 different colour versions and interchanging parts to get the current look. The plastic flash hider was removed and replaced with an imported, full metal Evike Airsoft M107 style one. I made a rubber cheek rest in the M107 style, which is glued to the receiver and non removable. Also fitted with a Snow Wolf bipod, a generic Barrett style carry handle and a massive zoom adjustable 6x24-50 illuminated scope. Original was spring action, this has been converted to run CO2 via a bolt kit (original spring bolt will be included), and also comes with an extra magazine, and an unfitted 499mm 6.03 Madbull tightbore barrel and upgrade PPS SVD hop up unit which will need slight modification to fit, but will make it much more skirmishable. Will come boxed with manual. Listed as used, but maybe had 10 rounds through it to test the CO2 conversion, other than that has just been on display, as such there are a couple of small minor marks, but is largely as new condition. Asking £200 including UK shipping, if paying via PayPal then buyer to cover fees please. No splits or swaps I'm afraid. For reference, new retail prices as follows - Rifle £140 Co2 bolt kit £55 Flash hider £40 Bipod £45 Scope £50 Extra magazine £15 Madbull tightbore £28 PPS hop unit £20