Gun picture thread

[alxndrhll]

1 hour ago, Davegolf said:

 

Whats the big silencer down the side of the cabinet for!?

😂

 

That would be a barbell and a foam mat.

[MandalShArK]

Just a Simple WE based Block 1 put together for my RAN Clearance Diver kit.

[mightyjebus]

long time project AEG. CYMA 0.28 Type 3 AK47. This is the recoil model similar to the TM NGRS AK's. externally it has some Inokatsu laminated furniture worn naturally and the magazine is a RS slab slided early AK mag modified for a midcap internals. Internally it is running a Leviathion V3 and ZCI 400mm inner barrel and Maple Leaf Mr Hop (50).

[Skara]

W ⚓ 🔫 - Carbon Fibre edition

 

[Davegolf]

That actually looks quite pretty, is it an actual W anchor gun? Whats inside?

 

Is the paracord structural?

[Impulse]

So, thanks to @Whats my first MWS build is basically done. It's a "close enough" build for a mk12 mod1 SPR (it's just an m16a4 with a scope and a bipod but ssssshhhhhhhh)

 

I do also have a carry handle and will look out for an m16a1 front so that I can do a quick conversion to an m16a1 for 'Namsoft. I do love me some captured weapons  

 

 

Now I just need a 2nd MWS to build as a little CQB tacticool thing...

Edited March 15, 2023 by Impulse

[Lozart]

10 minutes ago, Impulse said:

 It's a "close enough" build for a mk12 mod1 SPR 

 

[Terrywristt]

I brought an LCT AS VAL second hand years back for an incredibly good price (£200 with 10 mid caps), however It has been sat on my gun wall for awhile and needed some TLC.  After LCT and TWI announced they were going to release external parts for the gun,  I decided I was going to give this gun the TLC it deserves.

 

 

My LCT AS VAL Modernization project is finally complete.

[mightyjebus]

Picked up a CA53 from @VonGrimm and he was very honest in his description. After a bit of work she's looking a bit better. Just need to sort out the gearbox issue once the part arrives and I might replace the CA Mosfet with a NanoAAB I've got here sitting doing nothing.

Before:

After:

Based on a HK53A2 I fondled in Iraq belonging to the RMP CP teams. I also took a bit of time and gave the XM177 PTW a bit of a service.

 

[alxndrhll]

This has been on ongoing project since about November. Finally wrapped up late last week and running absolutely phenomenally over the weekend 👌🏻.

 

[MrTea]

My project gun. I've got a tan Holy Warrior EXPS3 S1 to go on top. Tan mags are on order. The one thing I hate is the gap between the flash hider and the handguard. I tried loads of different outer barrel combinations to get it as close to the handguard as I could, while allowing the suppressor to attach, and this is what I ended up having to settle on. Will have to try and fix this later. I believe that suppressor is wide enough to accept an Acetech AT2000 tracer unit which would a cool bit of functionality for it to have. Still can't decide on using the black RIS covers or the tan ones.

 

[alxndrhll]

Glamour shots of the AK, the Scalarworks mount really finished it off imo.

 

[Jez_Armstrong]

On 19/03/2023 at 11:50, mightyjebus said:

Picked up a CA53 from @VonGrimm and he was very honest in his description. After a bit of work she's looking a bit better. Just need to sort out the gearbox issue once the part arrives and I might replace the CA Mosfet with a NanoAAB I've got here sitting doing nothing.

Before:

After:

Based on a HK53A2 I fondled in Iraq belonging to the RMP CP teams. I also took a bit of time and gave the XM177 PTW a bit of a service.

 

Damn you I was going to get that 😂

[mightyjebus]

55 minutes ago, Jez_Armstrong said:

Damn you I was going to get that 😂

I knew I had to snap it up as soon as I seen it.

[SeniorSpaz87]

Running Scout/Sniper this weekend at Op Stonebreaker, so I decided to break out the ghillie. 

 

 

[SeniorSpaz87]

Decided to finally remake my mk23 that was "tactically acquired" last year by some rando. Unfortunately Hadron's stuff is taking a bit longer than Id like to get here so this one internally is a mix of Maple Leaf and older Hadron for now.

 

[SeniorSpaz87]

I might have finally gone too far...

 

Careful VSR-X, custom brass parts made myself, Spring Custom Works SV-98 chassis and carry handle, real POSP 3-9x42, Monoloc adapter, white phosphor PVS-14. Uses custom cut 55 round VSR mags, overhops anything lighter than .46gs and can easily toss .69g BBs 120m (videos on YouTube to prove thats real range and not "airsofter range"). Monoloc and PVS-14 come off for day games obviously.

 

[Enid_Puceflange]

On 22/03/2023 at 00:34, SeniorSpaz87 said:

Running Scout/Sniper this weekend at Op Stonebreaker, so I decided to break out the ghillie. 

 

 

 

Sorry, all I see is Dougle

 

 

[Lozart]

5 hours ago, SeniorSpaz87 said:

I might have finally gone too far...

 

Careful VSR-X, custom brass parts made myself, Spring Custom Works SV-98 chassis and carry handle, real POSP 3-9x42, Monoloc adapter, white phosphor PVS-14. Uses custom cut 55 round VSR mags, overhops anything lighter than .46gs and can easily toss .69g BBs 120m (videos on YouTube to prove thats real range and not "airsofter range"). Monoloc and PVS-14 come off for day games obviously.

 

 

You scope appears to have some rifle on it.

[Johndaniel4863]

Decided to try this tomorrow as my primary with my Makarov as secondary as my site is mostly buildings (HQ Airsoft) so should be good fun!

[Herrgh]

It's finally ready (thanks to Negative Airsoft) - my Magpul M4 with olive drab furniture. Not based on any real world firearm, just a rifle completely done in Magpul's design language; a collection of bits and bobs I find aesthetically pleasing and to match up with the G&P Magpul receiver (manufactured back when Magpul and PTS had a partnership).

 

Came with Magpul PTS tan furniture originally (which I might sell), but I much prefer the two toning here with olive drab over tan, as it seems a little bit more special, a bit more "military" and a bit more uncommon (to me) than tan and black.

 

Very pleased with how it's come together (although Luke suggested that aesthetically it would be better with an EOTech).  No doubt the M203 will come off after the first game. Looks cool though! And it's got a Perun, so it beeps confidently which makes me giggle every time I play with it.

 

 

 

 

Edited March 26, 2023 by Herrgh
typo

[Davegolf]

I personally think it’s better suited with a ACOG.

I think it would look more complete with an older generation magazine and maybe a Magpul itself 

Should definitely leave the 203 on, it makes it!

More press ups!!

I always like the moe handgaurds

[Herrgh]

I'd really like to try an ELCAN with it, see if it meshes. But I'm looking for an optic with better eye relief in any case, cos I bought that ACOG back when Ebairsoft used to be called Ebaybanned, and I basically have to have my face shoved right into the glass to see through it. Any suggestions?

 

40 minutes ago, Davegolf said:

I think it would look more complete with an older generation magazine and maybe a Magpul itself 

 

Yes to the Magpul, and I'd love to find an older legit PMAG in OD but I'd probably have better chance of winning the lottery. I've got loads of the tan ones mind (which again I'll probably sell).

[Davegolf]

Airsoft ACOGs are shocking on eye relief for sure.

 

A gun that length def needs a magnified optic IMO, or at least a beefy RDS like an Aimpoint Comp M4

 

Rattle can the mags if you’ve got some old Gen PMAGs

[JimFromHorsham]

On 26/03/2023 at 14:46, Herrgh said:

I'd really like to try an ELCAN with it, see if it meshes. But I'm looking for an optic with better eye relief in any case, cos I bought that ACOG back when Ebairsoft used to be called Ebaybanned, and I basically have to have my face shoved right into the glass to see through it. Any suggestions?

 

 

Yes to the Magpul, and I'd love to find an older legit PMAG in OD but I'd probably have better chance of winning the lottery. I've got loads of the tan ones mind (which again I'll probably sell).

try getting rid of the rear BUIS which is looking redundant anyway , that’ll give you an extra 2” of eye relief lol

On 26/03/2023 at 15:22, Davegolf said:

Airsoft ACOGs are shocking on eye relief for sure.

 

A gun that length def needs a magnified optic IMO, or at least a beefy RDS like an Aimpoint Comp M4

 

Rattle can the mags if you’ve got some old Gen PMAGs

genuine ACOGS arent much better tbh .

Edited March 28, 2023 by JimFromHorsham
Spl.