Jump to content
Updated Classifieds rule 5 - Adverts must include your username and date in photos

Leaderboard

Popular Content

Showing content with the highest reputation on 20/07/22 in all areas

  1. Floperator
    Sketched a couple of Obi-Wans while sweating my bollocks off on the tube yesterday
    6 points
  2. SSPKali
    To keep the M83 chest rig company. SADF battle jacket, in lovely condition despite the broken zip on the backpack part. Not sure when I will need to carry that much stuff but when I do…I now can!
    4 points
  3. Impulse
    Ok, so I got the Cyma SR-25 and it arrived today. Biggest annoyance was that the suppressor didn't come with any foam in it and it was loud. The gearbox noise is fine as that'll go away once I shove in some helical gears and trade out for a brushless motor, but the muzzle sound was a very noticeable pop without foam in the suppressor. Fortunately I had a crappy 5KU KAC style QD suppressor lying about that was on my MWS, but wasn't tight enough so the recoil caused shots to clip the end when it rattled around. Stripped out all the foam baffles from that and stuffed them into the SR-25's suppressor and it has already made such a difference. Out of the box it's only chronoing at 0.84J on a .3, though the consistency would make you think it's a HPA gun as every shot was 0.84J, there was almost 0 variance in each shot! Going to tinker around, as I have a Guarder sp100 lying about, but I will probably also buy an sp110, 120, 130 and 140 to toy around between getting 1.1J and 1.6J and see which I prefer. Waiting on a few parts to arrive still, but considering it's already fairly quiet by AEG standards, I'm optimistic about this build.
    2 points
  4. Floperator
    Couldn't have someone else suckling at my bladder pipe, I'd feel like one of the guests on Eurotrash.
    2 points
  5. Davegolf
    Donor AUG for DMR build & 6 mids
    2 points
  6. RostokMcSpoons
    Didn't post about my M14 when I bought it from the classifieds here, so making up for lost time... and just dropped through my letterbox is a holster (and MOLLE adapter) for my TM Hi Capa DOR It looks a bit like the Amomax holster from an earlier post, but it's an AliExpress special, so the thing is glued together rather than bolted, and the release button doesn't look as good... but it was cheap* and otherwise seems like it's good enough. Holster: https://www.aliexpress.com/item/4001339411443.html Adapter: https://www.aliexpress.com/item/4001365697637.html * The Amomax holster and adapters on eBay are actually cheaper than I thought, might as well save yourself a shipping delay and buy them, tbh.
    2 points
  7. Floperator
    Too hot for client work, not too hot to dick about with my own little projects. Today I made a packing piece out of brass plate for my FNX, to go around those awkward exposed tabs:
    2 points
  8. Davegolf

    E&L AK105-VSU

    andrey reacted to Davegolf for an advert

    This advert is COMPLETED!

    • For sale
    • Used

    In Garand Thumb tip-to-butt style... E&L AK105 platinum base gun with outer barrel shortened 1" along with Keymod VS-24 handguard and VS-33 railed gas tube (all parts TWI brand). Cerakoted Midnight Bronze. Also 2x RS BCM Keymod 5 slot rail sections. DTK-2 muzzle break and Putnik suppressor which has been machined out internally to make it lightweight, and a machined swiss tube and foam rings installed to make it functional and very effective (all parts TWI brand). Billet barricade stop & PEQ15 with remote & mounts. RS Zenitco RP-1, charging handle & RP-1, dust cover button & side folding button Cerakoted in Coyote Tan. Cyma railed dust cover, perfectly fitted and tapped to take nice low cap heads, Cerakoted in Burnt Bronze. Cyma tactical selector, perfectly fitted and shimmed - the most satisfyng AK selector ive ever used - Cerakoted in Patriot Brown. 6x Arcturus AK12 magazines Cerakoted in Patriot Brown, mag base plates Cerakoted Vortex Bronze. Cyma AK12 pistol grip perfectly fitted. Lower receiver with side mount plate removed, all edges smoothed, barrel, gas block & frotn sight Cerakoted in Springfield FDE. Magazine catch modified to be extremely tactile and secure - no accidental mag drops! Asura Dynamic folding stock adapter, custom brass pivot pin shims, custom stainless latch catch plate Cerakoted in Springfield FDE. RS AR15 buffer/stock tube, nut, locking plate. RS Magpul CTR stock in ral 7008 and Cheek Riser. Blue Force Gear sling on Magpul RSA Internally fully worked, 345 fps on 0.2s, 20 rounds per second, volume matched for 0.36s to give 65M range. Very quiet, very slick controls, balanced weight 3.5-4.3kg depending on attachments. Gate Titan with 2x 11.1v batteries, comms lead included & moral patch. Guarder SP110 fitted, SP100 included to drop FPS to 325. ASG 22k Ultimate motor Lonex helical bevel / pinion SHS 13:1 gear set Sector delay chip Oil impreg bushes Prommy BB spring guide Prommy piston LPE piston head Lonex type 1 cylinder ASG ultimate cyl head Airsoft Pro O ring nozzle E&L hop unit R-hopped SixG Rhop Prommy 340 barrel Rhop G&G green bucking No expense spared build (Total build cost £1448), is a joy to operate wether you actually play with it or do bedroom drills, i dont know what to say really, i dont wanna sell it but ive got to really. The paintwork/colours have been done to work very effectively in many environments - woodland, urban, arid. Genuine Eotech +£500 XPS2-0 (8 months old) Vids now up; CHRONO / INFO https://youtu.be/66jjGx93ksA 60M SHOOTING https://youtu.be/Wj9InPcFIVA

    £975

    1 point
  9. Rogerborg
    Reminder to self: don't be tempted to click on "Show this post", it will only remind you why you've got some people blocked for the good of your blood pressure and sanity.
    1 point
  10. Davegolf
    Noisiest parts of an AEG are the motor itself, the pinion/bevel, the piston hitting the cylinder head. High quality high torque brushed or brushless motor. Helical pinion/bevel set Correct volume so the piston decelerates into the cylinder head, not smash into it, and sorbo to deaden the blow. A weighty piston also aids this.
    1 point
  11. Sneaky
    I have had a selection of different SR25’s and the CYMA one is the best I have had. Silly the suppressor does not come with foam, but that is easily rectified. I did a whole load of changes, but stuck with the same gear set. Having the spring change system is great to have. Mine is very quite, but would like to know how much changing the gears will have an effect on sound. Any gearbox if shimmed well can be very quite. Most of the sound is from the cylinder head area. Will you be r hopping it, works wonders.
    1 point
  12. GothicGhost
    I tested out belt setup with 48CI hpa tank because it was too hot for plate carrier, but I think I need a stronger belt for next time.
    1 point
  13. Shamal
    I carry a spare mouthpiece so if anyone is desparate and needs to suck on my bladder pipe mid game I let them 🤣🤣
    1 point
  14. EDcase

    Along time away…..

    Shamal reacted to EDcase for a topic

    Welcome back 🖐 Put some pics on Appraisals thread to get an idea how much it could go for... https://airsoft-forums.uk/forum/151-appraisals/
    1 point
  15. colinjallen
    That would explain it! That piece pushes the tappet plate back, allowing a BB to feed. It is indeed the sector gear, but you would probably be best advised to buy a whole new 16:1 gearset from someone like AK2M4 (allegedly, other purveyors of airsoft bits and pieces do exist), along with a delayer chip to ensure that the tappet plate stays back long enough. Whatever you do, you are going to have to do some shimming to ensure that the gears are spaced properly. There are some very good guides to this online.
    1 point
  16. Cr0-Magnon
    BTW, I've since changed my mind about them and will avoid at all costs going forward.
    1 point
  17. timski

    Powerair6.Com

    Rogerborg reacted to timski for a topic

    Recent experience with them, still brilliant as always, however customs can sting you and every time I’ve ordered from them customs have done their thing. however I tend to do larger orders. Have also ordered a RIF from them with no issues just customs and their awful repackaging. For PTW/HPA users they tend to stock the awkward spares. Brilliant company with great coms.
    1 point
  18. Davegolf

    Over the barrel bipods

    Lozart reacted to Davegolf for a topic

    Yes @PureSilver thats exactly it, just unobtanium, if i find any ill let you know, thanks
    1 point
  19. PureSilver

    Over the barrel bipods

    Davegolf reacted to PureSilver for a topic

    I've looked into RIS-attached over-the-bore bipods because one of my rifles literally doesn't have anywhere else to mount one: Unfortunately as you say over-the-bore bipods aren't that common. The Fortmeier Phoenix looks nice, but it's RS and correspondingly expensive. The Leapers UTG TL-BPOB01-A looks OK but isn't that cheap either. The one I personally want is the Otto Repa Helios, which looks lighter, and which Begadi sold a relatively reasonably priced replica of several years back. Unfortunately they're really difficult to find, but worth investigating.
    1 point
  20. Cr0-Magnon
    I do but yet to skirmish it. My experience is that they don't take WE/TM style mags. The mags and internals are VFC. I'm really in two minds about this RIF. On one hand I really like the shape and texture of the frame but it's made from fairly thin plastic, which flexes. The magwell definitely improves grip and reloads but it wobbles. The tuneable flat trigger allows you to rapidly follow-up on shots but the initial break is stiff (as seems to be the case with VFC Glocks). Gas efficiency and cool weather performance are above average IMO. I have managed to get lock backs after four mags worth of BB's on a single charge of gas. Overall I'm happy with it but I've got quite a few other pistols and tend to favour my TM Gold Match if I know it's actually going to get some use (ie CQB). However Glockwise, I wouldn't recommend this to a friend, over one of TM's offerings (which will take your WE mags). Especially when you consider range of aftermarket parts available for each.
    1 point
  21. Rogerborg

    Airsofting in the heat

    Tackle reacted to Rogerborg for a topic

    Wait, what? People have been drinking from your bottle? Even if they thought it was site-supplied, that's manky.
    1 point
  22. DaktariT
    Couldn't resist.
    1 point
  23. concretesnail
    Sorry not seen any of those about outside of rifs that have them integrated. I didn't want a bipod dangled off the bottom o my dmr so went with some like these.... https://www.ant-supplies.uk/rifle-bipods/m-lok-handguard-bipods.html theres keymod too, leapers make some too, in this style. Good luck in your hunt.
    1 point
  24. Tactical Pith Helmet
    Ever watched this? It's brilliant.
    1 point
  25. Tactical Pith Helmet
    I take a gallon of water with me to leave at respawn. The last two games, lazy fuckers have drunk the lot. I don't mind helping a man out, but leaving me dry is taking the piss, especially mid-viral borne pandemic. I had more in the van, but next game I'm spitting in the bastard loudly and demonstrably before game on... Figure a litre plus an hour in this and you'll be fine if you know the signs of heatstroke to watch out for.
    1 point
  26. Tactical Pith Helmet
    Gunman Namsoft at Alpha 2019(?)
    1 point
  27. Cr0-Magnon
    @Rogerborg Apologies for the amateurness of recording a TV but this scene, seemed topical.... VID_20220304_132659_02.mp4
    1 point
  28. Rogerborg

    Airsofting in the heat

    Lozart reacted to Rogerborg for a topic

    I'll get some fresh sheets ready.
    1 point
  29. Dan Robinson
    By definition you're not going to achieve this.
    1 point
  30. Cr0-Magnon
    When it's 30c and the Ladsofter rocks up with a Co2 Das Wesson Revolver....
    1 point
  31. DaktariT

    Atmospheric Photos

    Skullchewer reacted to DaktariT for a topic

    Some friends of mine that don't play airsoft saw this and ask when I serviced. Fill your boots.
    1 point
  32. JimFromHorsham

    Gun picture thread

    EDcase reacted to JimFromHorsham for a topic

    Had to be done weighty beast test firing tomorrow
    1 point
  33. Alimcd
    Once you cut the tang off the back of the KC02 receiver, they’ll fit in just about any 10/22 stock. Heres a selection of what I’ve fart arsed around with so far
    1 point
  34. Wavey_Gravey
    Crapola indoor photo but this is the kit as it stands, will get some decent outdoor photos soon. -Montane terra shirt (This is the mutts). -Spiritus MK5 - Skinny straps + 556 insert. -Brittac / Flimmuur LW shooters belt. -Safariland 7378. -Esstac Kywi mounted with onewrap. -Revolution race outdoor jeans. -Solomon quest boots. I like to keep it fairly light, the only thing I add is a lucozade and some bangs on the MK5 with some rubber bands.
    1 point
  35. SBoardley

    Ghk akm

    RedDZ reacted to SBoardley for an advert

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    Ghk akm comes with repro magpul stock ,grip, zenitco style rail, sight mount ,vert grip and cool rds fitted. spare bolt, two nozzles, gen Ak sling, wood forend and 4 gas tight mags. internally, has tnt hop/ barrel combo. 550 all in posted

    £550

    Bath

    1 point
  36. C-Diddy
    Likely to be my final airsoft purchase of 2022 🤥, a Posca pen to help identify which mag is being a dick.
    1 point
  37. Davegolf
    The TM MP7 is a cracking gun, accurate, fast and loud… what more could you want 😎 Well some would argue size I suppose 👀
    1 point
  38. SilentSparky
    Picked this up yesterday, looking forward to using it at the weekend 🙂
    1 point
  39. Wavey_Gravey
    Brit-tac / Flimmur LW belt & a Safariland 7378 7ts holster that I’ve spent the morning filing the shit out of to make it a better fit for the also newly purchased marui glock 17.
    1 point
  40. Steveocee
    I'd have been shocked if it was any other site. Anzio are notorious for this. A friend of mine went to chrono with his MTW, turned all the way down, using 25's, was running about 300-305, marshall dried his teeth when chrono'ing and said he can play but if he gets pulled in game for random chrono then it's "his risk" - So it was under but still a chance of it not? Great site for buildings, cover, layout. Crap site for marshalls.
    1 point
  41. Rogerborg

    Paras will be Paras

    Vote4wes reacted to Rogerborg for a topic

    Dammit, my grandads fought Hitler to protect Great Bri'ish traditions like dogging.
    1 point
  42. EDcase
    Adding my positive experience 👍 Bought at RIF from them which was out of stock in most places and the only one available in UK was about £240 plus post. Paid £167 including shipping and arrived by Parcel-Force the following week with no extra charges.
    1 point
  43. hitmanNo2
    Best to e-mail them about 3am 😄
    1 point
  44. Cr0-Magnon
    I can't help with your specific question I'm afraid. However I have bought from them a few times and can tell you that the vast majority of negative feedback they receive is because if you annoy them, they will literally tell you to fuck off. Usually nothing to do with the items they stock.
    1 point
×
×
  • Create New...