Leaderboard

Could just be someone who's not really involved, trolling. The real Andrey Shady should really stand up though. Rogerborg don't gotta lie in his ads to sell RIFs Well I do, so fuck him and fuck you too You think I give a damn about a scammy Half of you 'softers can't even stomach me Let alone stand me

Twins separated at birth FINALLY reunited ! 🤣🤣🤣👍

Oh so true , BUT I bet you purely by accident stood next to that cocky fecker(that every section had !) and when you did the canister swap drill you ‘fumbled’ handing him yours so he’d get a lung full of CS ? ‘Accidentally’ of course ! 😇

Careful, you'll get a slap round the chops with a pair of Mechanix gloves and challenged to give satisfaction for that remark. Luckily however, I expect that you will be the only one present with a working duelling pistol...

(The scope is the replacement flashlight) Ill get some better photos soon

Ladies, choose your weapons

Any 1911 fans out there? Here's the latest build that I tried. It won't be replacing my glock for skirmishes anytime soon, but a cool build nonetheless.. Did you know people do bowling with 1911's? Apparently it's called "pin shooting" and there are specific styles of 1911's catered to that. Here's the post that inspired this build -> https://www.thearmorylife.com/bowling-with-a-pistol-a-guide-to-pin-shooting/ Wanted to get a short compensator like the real-steel examples in the article, but couldn't find any similar so I went with a 45" muzzle chamfer instead. With the looser tolerances of airsoft it doesn't look as blended to the bushing as RS, but I think I like it. I had to learn the hard way that stainless takes a lot longer than you think to grind out using hand tools...😅 In certain angles it makes the bore of the outer barrel look bigger than it actually is some real-steel examples that I referenced:

Oh, I didn't expect him to. Just worth a shot.

Well of course that's taken as read, but almost no assault rifle style RIFs that costs more than a good batch CYMA with (at most) 2-3 hundred worth of upgrades will offer better range and accuracy. How much more of a dead horse can possibly be flogged than an idea that basic realistically? In classic hypocritical fashion the highly ironically condescending and unnecessarily foul reverse-snobbery has always been very much alive and well on this board. I don't see that ever changing so irrespective of it's pervasiveness I personally continue to come here anyway, because this is mostly a good site and definitely one of very few airsoft forums still left fairly active; most members are pretty decent folks overall. I also feel it's pretty important to try and keep boards like this alive as alternatives to the shit shows that are most airsoft facebook groups of significant size and not highly specific. I wasn't saying the Bolster is top value or that anyone should buy it, that's why I mentioned my own build in an attempt to imply that because said built is the path I'm following it's also the one I'd recommend; but that may have not been super clear and that's my error if so. But if someone out there with deep pockets wants a gucci AEG and doesn't have the utterly indescribably niche expertise to realise how else to spend that same money for something nicer/get the performance for less money, maybe being a fucking massive cunt to them isn't the way forward. Dunno just a thought that enters my mind. eta - not saying that's what people here did, saying it'd be an idea to avoid doing so.

Blimey, can't believe I'm seeing this name come up again. He's been scamming longer than I can remember so I'd certainly bet he's gotten incredibly good at it by now, had more than enough experience to be a real pro. Won't help much I know, but I wouldn't feel anything negative about the fact you thought he was genuine. As has been said here and a million times before (addressing all potential readers) - never ever ever undertake any transaction of any kind without paying the few extra £ to paypal. Normally I tell retailers in a polite way to get bent when they offer the 'extra insurance cover' bla bla bla, but with person to person business while the risk is actually low in the grand scheme of things it's just not worth the risk. Especially if you're on a budget and aren't conducting many transactions overall.

Hi, ALL! 👋 Can’t believe I’ve done a 100 videos on Airsoft! 🤪 So considering what to do and make my channel better? 🤔 Doing the best with what I have, enjoy it for what it is! 🔫😎👍 💷GAMBLE💷

pretty much zci would be my pick for bang for buck, not used the aols so can't comment. can't say from what i've seen of madbull stuff over the years that i'd be keen to use their barrels, especially aluminium, and especially not when the zci exists. worth noting, there's not really any benefit in extending the inner barrel from a performance perspective, and can mess with things like voluming.

Wall mount in my den for my MWS

Can’t be used with an S6 , only S10 and after . If you wanted a drink while wearing the 6 you had to get under cover , de-contam the top of your bottle , then the lower half of your mask then loosen the bottle lid but NOT open it , take a couple of good deep breaths then while holding your breath , keep your eyes tight shut , pop the lid , lift your mask , drink as much as you could in one go then discard the rest as its now contaminated ! 😳 Even though your using it as a replacement for the big old MAGlite I’d say ditch it as it looks sooooooo out of place with your loadout (which is a bloody good attempt by the way😉)and just run the gun with nothing just the irons . 👍

My 'Close enough if you squint and turn your head a little from a distance' TM MWS based l119a1 TM MWS base Unknown brand CAR-15 stock from Ebay secondhand. Guarder Buttpad. Airsoft Artisan Flash hider and suppressor. Begadi DIS Spare barrel and frontsight chopped by Jim at LCs Engineering outpost. Have kept the originals should I ever wish to change it all back. USGI 'silent sling' Also a big thanks to AlphaBear for talking me out of selling this last year!

My gun rack. Not all r there. I have 2 others share with bf witch is a shoty anf baby cappa. From top to bottom New not skirmished yet star csi x5 Black and gray only fpr milsim. Pink high cappa shelby g and g ff16 carbine been upgraded had since late 2011 used since. Seen alot of wars unknown pistol c02 covered in black dimontys. there superglued on aint comeing off Tm Star thunder maul (ghost in the shell gun) in black and silver new never skirmished. For cqb It is the Japanese version not usa version.. all different is no orange tip the stamp on side is different also have full lengh clear riot sheld. And pink bfg.

Is one of those an AEG and the other GBB?

As you prefer plain speaking, I'll be absolutely clear: if you pay someone else that much to build you a toy gun to play pretend soldiers with, you're a complete and utter mental case. Genuinely not right in the head, and probably going to end up as the subject in a page 5 regional news story involving a domestic tragedy. No caveats, no nuance, no exceptions, no apologies.

I loved my kwc 1911 but it's too heavy to be a sidearm really

Sure, for upgrading a system with recoil that makes sense. It makes a hell of a lot less sense to do the same to a standard aeg with no recoil system thats pretty good ootb, which is what the base krytac is.

It just won't though. You could buy all of that for about £1100 retail, including the £200 of external rubbish, and don't tell me its costs £300 to fit a titan, a motor, a new cylinder, and a hop. It's a retailer doing the exact same idiocy as many airsofters with deep pockets do when they buy a TM and replace every part of it for no reason. Except you're being charged a premium for someone else to make the mistakes for you with the guise of it being done by "professionals". It's not being balked at because it's expensive, it's because it's f🤬ing stupid.

I would not recommend a Gate Pico SSR at the moment; I have had two or three fail in the last few months and am aware of others who have had issues with them. The Nano mosfets seem ok though.

So, one army surplus belt and yoke harness, an unwanted ghillie poncho, pinking shears, the trusty old hot glue gun and....

Yeah know what you mean. My memory is akin to a goldfish. 😄

Hullo! I swear I can’t remember posting in this thread…..

Yep Power Limits and the Firearms Act — UKAPU

While you're right about the pricing of this I think what people are laughing at is that it's not going to perform much better than a £200 cyma with £200 of upgrades. I'll admit I've put more into my M4 than that but it's been built from the ground up to be exactly what I want. I can't see many people paying that much for something that isn't unique to them in some way

I remember the mouth guard (I think that's what it was called, possibly the nose guard) detached from inside my S10 doing decontam drills. Of course I couldn't then get my resp. back on properly and when I opened my eyes to see why the instructor wasn't responding to my raised arm, he had his back to me helping someone else. Ran out of air, lung full of CS. Is it weird that I strangely enjoyed the RTF?

Don’t hold your breath , I think @andrey won’t be responding soon seeing as he’s been on-line multiple times since this pile of shite reared it bolloxed head ? 🤔

My lads first rif was a Firehawk. It still shoots well; a high torque motor is no mis-investment though.

God I hated decontamination drills in the chamber......

Yeah i got rid of it completely i got the actual maglite they used turns out my grandad has one and ive got it now but the mount is stupid money so i might just get a big scope mount to attach it too

Glennie is in the north, the op is talking about sending it to Eire, the south. Personally I'd be reluctant to ship to either areas 🤔

generally i'd just leave it as-is, mock suppressor is fine for looks but you shouldn't need the inner barrel inside it if it's not clipping. indeed it's a boon if you wanted to put a tracer unit inside the suppressor to keep the shorter barrel, or if you want to occasionally change it up with standard/suppressed looks. gear ratio won't have an effect on volume unless you're short stroking, and if you're short stroking as long as you don't go shorter than the length of the port it's also fine. sadly no, sitting duck was better at this sort of thing than me, i usually just stick with whatever the gun came with. if in doubt go higher volume. fortunately aeg's aren't as sensitive to it as for example hpa where mis-adjusted volume can seriously affect accuracy (although fortunately it's also super easy to adjust on those platforms)

I trust the OP is aware of Steve Glennie, and that he isn’t the recipient of the said pistol? 😳

Hi, ALL! 👋 Can’t believe I’ve done a 100 videos on Airsoft! 🤪 So considering what to do and make my channel better? 🤔 Doing the best with what I have, enjoy it for what it is! 🔫😎👍 💷GAMBLE💷

Got home from work today and wife was still on e-bay! If she is still on there tomorrow I'm gonna have to drop the price lol. Love her lots really. She is the butt of most of my jokes( and other activities but that's personal) 😄😄 Regards

I'm relatively new to the airsoft tech. side of things, but... all the 11.1v battery will do is get the motor (and therefore the gears) turning faster. The sector gear will release at exactly the same point, and will therefore compress the spring to the same point. So this won't have any impact on the FPS. So if you've greased the inside of the cylinder, then that's likely to be the cause of your FPS increase. Failing that, it could be that things are just better aligned after you've had them in and out. My son's first gun was also the Firehawk, and he still loves it (and it's still stock).

Just had to post, loving being back to airsoft…. Thanks to the guys at The Mill in Wigan for being so welcoming.

I've a bit of time on my hands at the moment, and is this is an "upgrade thread", I'll post here about the GATE Titan v2 rear wired and MAXX Advanced Trigger I've just fitted to my son's Firehawk. It's a solid rifle, a good "starter" + its stumpiness can at times be very useful in close quarters + its has so much potential with as stock a full cylinder and a strong spring, however it's really let down by the mechanical trigger which is glacially slow to get off the first shot and if not pulled completely can prevent a full gearbox cycle on semi and cause a jam. I thought I may have to get the Dremel out but the Titan went into the gearbox perfectly with no issues at all, and start to finish took a little longer I expected as I carefully checked all three sensor types multiple times in the GCS app on my Android smartphone before fully re-assembling it (so maybe around two hours). Personally I love controllers, like in the Double Eagle M90X's my son and I have, as you can just get rid of things like cut off levers etc. and have a much simple mechanical setup (of course trusting that the controller does as intended and doesn't go pop). So, it now has what feels in comparison an instant first shot (I'm wary to use pre-cocking as the stock spring feels like it may be close to an M120, I don't want things to break), can run our 11.1v LiPo's (it was before only ever used on 7.4v LiPo's), and the geek in me loves the telemetry in the GCS app. The auto is also substantially better, but the RPS is not that great, so I think a higher torque or brushless motor would make it go like the clappers. Finally, relevant to the OP, the FPS has gone up by around 10 from before installing the Titan. Does using an 11.1v have a positive impact, or is it that I removed the thick and over applied original G&G grease everywhere and frugally used Super Lube, or a combination of both? (I'm also going to pinch it for a few rounds when we next play, see what it's like in action)

@andreyGot anything to say about this?

Mine arrived today also, very speedy service. Here it is next to a real steel version; I think I'll age the wood at some point

That’s a bottle top allowing you to drink through the GSR respirator …… but of course that did not exist in 1980

GAS,GAS,GAS!!!!!! looks good, better invest in one of these for in game hydration

My penis was in the Guinness book of records. But then the librarian asked me to take it out

No. I refuse to go to any event run by that bunch of clowns

“Storm” grip and a carry handle optic would look the tits on that.

Hi, ALL! 👋 Here is part 4! 😁 Managed to get to the site and have a Great day despite the weather! 🤪 Doing the best with what I have, enjoy it for what it is! 🔫😎👍 💷GAMBLE💷

How long for?