Supporters Druid799 Posted August 16, 2019 Supporters Share Posted August 16, 2019 6 hours ago, clumpyedge said: Not airsoft related really but could be used for milsims I guess if the AO is anything like the trees etc. but I just got myself a full DD hammocks set up so I can concentrate on my other hobby which is bushcraft and wild camping. *not my picture but you get the idea Have had a good few nights out in a hammock on an over night’er or two ! Get the set up right and your in for a good nights kip !👍 clumpyedge 1 Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted August 16, 2019 Share Posted August 16, 2019 3 hours ago, Prisce said: I hear ya. I’m a bit of a car nut and am fortunate enough to have a few. Sold my defender in March for more than I paid for it new, I now have a kitted out Discovery 3. I also have a T5, and there is a Mercedes Vito on the drive begging to be converted into a camper. I went away from turning the car into a overlander and actually purchased a trailer to do the job. Pic attached. How are you getting on with the disco 3, I only ask as our old series 2 should have come with a welder as a factory option, otherwise it was a workhorse Link to comment Share on other sites More sharing options...
Supporters Popular Post Prisce Posted August 16, 2019 Supporters Popular Post Share Posted August 16, 2019 4 hours ago, osteoshot said: How are you getting on with the disco 3, I only ask as our old series 2 should have come with a welder as a factory option, otherwise it was a workhorse Disco 3 is awesome. Electrics can be fun, and some of the maintenance is expensive(clutch and rear cam belt). I own 2 disco 3’s and they are definitely the best of both worlds, versatility of the defender, comfort of the Range Rover. Complimentary picture. Monkman, clumpyedge, ProPain87 and 4 others 3 1 3 Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted August 16, 2019 Share Posted August 16, 2019 Yours is a bit more shiny than our old jalopy. We replaced it with an ancient shogun and that just runs and runs, the old disco 2 had a dash board like a Christmas tree but as we sorn them and use them around the farm as a cheap tractor/more practical than a quad bike we didn't care. Link to comment Share on other sites More sharing options...
Mad Rag Posted August 16, 2019 Share Posted August 16, 2019 just bought a dynatex dominator Monkman 1 Link to comment Share on other sites More sharing options...
Musica Posted August 16, 2019 Share Posted August 16, 2019 My 5.11 40mm pouch arrived. Game day on Sunday for a field test. Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted August 17, 2019 Share Posted August 17, 2019 NOTHING!! And I'm getting itchy! Albiscuit, clumpyedge, Mad Rag and 1 other 1 3 Link to comment Share on other sites More sharing options...
Lasbrisas17 Posted August 17, 2019 Share Posted August 17, 2019 my norotos nvg mounts arrived for my budget gen1 build for when I'm too much of a nancy to use my Gen2's. This rhino mount is special because it has vertical height adjustment unlike some others. GeorgePlaysAirsoft and Enid_Puceflange 2 Link to comment Share on other sites More sharing options...
Pop Posted August 17, 2019 Share Posted August 17, 2019 Nothing majorly exciting, but it's my first airsoft purchase none the less - MTP shirt and trousers 😁 Enid_Puceflange and Druid799 2 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted August 17, 2019 Mostly Retired Moderators Share Posted August 17, 2019 Decided to upgrade my gloves ahead of Autumn/winter. Decided to try some of the Armoured Claw Gloves from Gunfire. Matt Skunk recently posted about them and they look great, so why not Got a pair of their "Shooter" Cold Weather gloves in black: And a pair of the "Shield Flex" in Olive Drab & Black: https://gunfire.com/pl/products/rekawice-taktyczne-armored-claw-shield-flex-tm-oliwkowe-1152213948.html I'll report back with my findings once I've got my hands on (or rather, IN) them! Druid799 1 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators Popular Post L3wisD Posted August 17, 2019 Mostly Retired Moderators Popular Post Share Posted August 17, 2019 I've also just been incredibly irresponsible, and just bought a Carry handle. (I'd like to blame @rocketdogbert in advance for being my enabler 😄 ) ...an expensive carry handle. I've wanted this certain Carry handle for my PDR-C ever since seeing a gun in the owners group on Facebook that belongs to a chap in Denmark called Danger Dan. This is his gun with it on: Looks amazing. Really suits the PDR and finishes it off a treat. So... £93 later (!!!) I should have one arriving on Tuesday. I've paid less than that for actual guns! 😕 BibbsOnTour, GeorgePlaysAirsoft, Druid799 and 2 others 3 2 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted August 17, 2019 Moderators Share Posted August 17, 2019 1 hour ago, L3wisD said: I've also just been incredibly irresponsible, and just bought a Carry handle. (I'd like to blame @rocketdogbert in advance for being my enabler 😄 ) ...an expensive carry handle. I've wanted this certain Carry handle for my PDR-C ever since seeing a gun in the owners group on Facebook that belongs to a chap in Denmark called Danger Dan. This is his gun with it on: Looks amazing. Really suits the PDR and finishes it off a treat. So... £93 later (!!!) I should have one arriving on Tuesday. I've paid less than that for actual guns! 😕 £93 FOR A FECKIN CARRY HANDLE, its not even real steel is it ?......thats mad 😵 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted August 17, 2019 Mostly Retired Moderators Share Posted August 17, 2019 ... no sir It's a Laylax aftermarket part. It's the final piece of the puzzle before it goes off to Negative airsoft for fixing and then @GearTech for painting! It's going to be the coolest gun in the UK 😎 Druid799 and Tackle 1 1 Link to comment Share on other sites More sharing options...
Guest Posted August 18, 2019 Share Posted August 18, 2019 11 hours ago, L3wisD said: I've also just been incredibly irresponsible, and just bought a Carry handle. (I'd like to blame @rocketdogbert in advance for being my enabler 😄 ) ...an expensive carry handle. I've wanted this certain Carry handle for my PDR-C ever since seeing a gun in the owners group on Facebook that belongs to a chap in Denmark called Danger Dan. This is his gun with it on: Looks amazing. Really suits the PDR and finishes it off a treat. So... £93 later (!!!) I should have one arriving on Tuesday. I've paid less than that for actual guns! 😕 Seriously, seriously cool, can’t wait to see it painted bud. “enabler” that’s funny 😂😂 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted August 18, 2019 Supporters Share Posted August 18, 2019 11 hours ago, L3wisD said: I've also just been incredibly irresponsible, and just bought a Carry handle. (I'd like to blame @rocketdogbert in advance for being my enabler 😄 ) ...an expensive carry handle. I've wanted this certain Carry handle for my PDR-C ever since seeing a gun in the owners group on Facebook that belongs to a chap in Denmark called Danger Dan. This is his gun with it on: Looks amazing. Really suits the PDR and finishes it off a treat. So... £93 later (!!!) I should have one arriving on Tuesday. I've paid less than that for actual guns! 😕 Don’t blame you at all , that almost looks positively orgasmic EXCEPT for the sight in the first pic , looks like a £5 one From ‘bbgunzsisbestest.com’ ! (I know it’s probably not) but just looks so out on top of that gorgeous looking gun ! 😳 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted August 18, 2019 Supporters Share Posted August 18, 2019 17 hours ago, Tackle said: £93 FOR A FECKIN CARRY HANDLE, its not even real steel is it ?......thats mad 😵 welcome to unicorn guns, try finding a front railed forend for an sa80 or an f2000. Link to comment Share on other sites More sharing options...
Moderators Tackle Posted August 18, 2019 Moderators Share Posted August 18, 2019 12 minutes ago, Adolf Hamster said: welcome to unicorn guns, try finding a front railed forend for an sa80 or an f2000. yeah we've got four bullpups & only one has any rails, ris forends for em are rarer than rockin horse poop. good job I like to improvise 😉 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted August 18, 2019 Mostly Retired Moderators Share Posted August 18, 2019 I've recently fitted M-lok rails to the PDR-C. When you remove the fake cocking handles, the slots that are left behind are perfect M-lok size! Pop, Asomodai, Druid799 and 1 other 2 1 1 Link to comment Share on other sites More sharing options...
Asomodai Posted August 18, 2019 Share Posted August 18, 2019 21 minutes ago, L3wisD said: I've recently fitted M-lok rails to the PDR-C. When you remove the fake cocking handles, the slots that are left behind are perfect M-lok size! I have been thinking of doing this for a while though I am using some angled rail adapters on the top rail. Got a link to the rails you bought? I will probably do this to my T97 as the hand guard vents are the exact right size as well. Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted August 18, 2019 Mostly Retired Moderators Share Posted August 18, 2019 3 hours ago, Asomodai said: Got a link to the rails you bought? Well, being an experienced and savvy Airsofter, with knowledge of most retailers, I got them from...Amazon 😂🤦♂️ https://www.amazon.co.uk/gp/aw/d/B07N7M1C12/ref=ppx_yo_mob_b_track_package_o0_img?ie=UTF8&psc=1 The 9-Slot rails fit in there perfectly. Asomodai 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted August 19, 2019 Supporters Share Posted August 19, 2019 New helmet cover! And a fancy sticker because it's my first order! Not gonna lie I'm a bit excited about this. And yes I am well aware that I should get out more if a helmet cover gets me excited but it's a proper cover for a Team Wendy AND it's from Agilite! BibbsOnTour and M_P 2 Link to comment Share on other sites More sharing options...
cropzy Posted August 19, 2019 Share Posted August 19, 2019 Olight PL2 Link to comment Share on other sites More sharing options...
Supporters M_P Posted August 21, 2019 Supporters Share Posted August 21, 2019 5.11 rush 12 backpack Link to comment Share on other sites More sharing options...
MILITATED Posted August 21, 2019 Share Posted August 21, 2019 Among many other bits, this is all I have eyes on right now but it's a custom Agency Arms lower with my 'MLTD' tag from my YouTube channel 😁 I've never spent this much on a pistol but many pics will follow when it is all together 😎 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted August 21, 2019 Mostly Retired Moderators Share Posted August 21, 2019 Some bits and bobs from @ak2m4. Gears and motor for the M4. Spring and motor for the PDR-C. Time to see what rocket innards are like! Lozart and ak2m4 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now