Hellfish Posted June 13, 2019 Share Posted June 13, 2019 MP5K PDW now with added Low Profile Red Dot.... Resistor170, Albiscuit and EvilMonkee 2 1 Link to comment Share on other sites More sharing options...
paradoxum Posted June 14, 2019 Share Posted June 14, 2019 About to disassemble and fix some things, give it a little lubing, make battery compartment larger, add better rear 2-point mount sling point to underneath it behind the grip rather than on the sling as it is causing it to rattle: Airgun 1911, I swapped the crappy feeling plastic grips with real walnut ones, took a bit of filing and sanding: Resistor170 1 Link to comment Share on other sites More sharing options...
StayOnTarget Posted June 14, 2019 Share Posted June 14, 2019 On 12/06/2019 at 20:23, Zerofuxx said: Cheeky! Got this last week used it once so far but its a monster! Welcome to the family,they're great RIFs mate enjoy 🖖 Zerofuxx 1 Link to comment Share on other sites More sharing options...
Popular Post Alexharris246 Posted June 15, 2019 Popular Post Share Posted June 15, 2019 A little update on the crb. I'll be using it for the first time tomorrow and I cant wait! MagpieTactical, Chris-the-Jock, Nodnol and 3 others 2 1 3 Link to comment Share on other sites More sharing options...
Popular Post DopeYourScope Posted June 16, 2019 Popular Post Share Posted June 16, 2019 Thought I would post an updated photo of my now wrapped M40A5 Gas Rifle. The camouflage tape is Jack Pyke Tough Tape, it's velvety to the touch and works incredibly well as many a time I've laid my rifle when pulling the pistol and been unable to spot it 😂. I am also now using a scope extender and honeycomb kill-flash as well as ANT Supplies one piece scope mount. StayOnTarget, Tec-Spek, Resistor170 and 6 others 8 1 Link to comment Share on other sites More sharing options...
StayOnTarget Posted June 17, 2019 Share Posted June 17, 2019 On 29/04/2019 at 18:06, Iceni said: G&G GR300 Pro Shorty. It's very old and none of the trades were etched (just screen printed). Trust me these are the magneseum cast lower and upper. Solid stock rather than the wire one, I have the wire one in a drawer, I just don't like the weight when the battery is in the front. Thats very nice indeed I'm on the hunt for one,so.......? 😉🖖 Link to comment Share on other sites More sharing options...
Hellfish Posted June 18, 2019 Share Posted June 18, 2019 DarkAssassin, Resistor170 and Albiscuit 2 1 Link to comment Share on other sites More sharing options...
Popular Post Stratton Oakmont Posted June 19, 2019 Popular Post Share Posted June 19, 2019 New to me, full refurbish, very happy FreeFrag.UK, StayOnTarget, Hermesh and 2 others 3 2 Link to comment Share on other sites More sharing options...
ghostwalker Posted June 21, 2019 Share Posted June 21, 2019 Don’t know if I ever properly posted this. But here is my precious if somewhat temperamental baby. Kwa/Pts rm4 erg. Hermesh and DopeYourScope 2 Link to comment Share on other sites More sharing options...
Popular Post heroshark Posted June 21, 2019 Popular Post Share Posted June 21, 2019 Up dated pic of my revised springer collection. I decided to replace some and let some of the duplicates go. I know it's futile taking these pics. Pissing off the wife getting them all out. 2min later getting new ones and having to do it again. Nice to have a record of these things though . Did manage to find a bit of order to it this time too. DopeYourScope, djben9, SgtTalbert and 2 others 4 1 Link to comment Share on other sites More sharing options...
Moderators djben9 Posted June 21, 2019 Moderators Share Posted June 21, 2019 2 minutes ago, heroshark said: Up dated pic of my revised springer collection. I decided to replace some and let some of the duplicates go. I know it's futile taking these pics. Pissing off the wife getting them all out. 2min later getting new ones and having to do it again. Nice to have a record of these things though . Did manage to find a bit of order to it this time too. i think you may have a little problem...... heroshark and Hermesh 2 Link to comment Share on other sites More sharing options...
SgtTalbert Posted June 21, 2019 Share Posted June 21, 2019 1 minute ago, djben9 said: i think you may have a little problem...... That isn't what I'd class as a little problem heroshark and djben9 2 Link to comment Share on other sites More sharing options...
Hermesh Posted June 22, 2019 Share Posted June 22, 2019 My ever evolving 416... Nick G, Tec-Spek, Druid799 and 1 other 4 Link to comment Share on other sites More sharing options...
Hermesh Posted June 22, 2019 Share Posted June 22, 2019 Pair of Glocks, or another Glock pic... Sig MCX... Tec-Spek, ProPain87, Nick G and 1 other 3 1 Link to comment Share on other sites More sharing options...
Iceni Posted June 23, 2019 Share Posted June 23, 2019 On 21/06/2019 at 14:25, heroshark said: Up dated pic of my revised springer collection. I decided to replace some and let some of the duplicates go. I know it's futile taking these pics. Pissing off the wife getting them all out. 2min later getting new ones and having to do it again. Nice to have a record of these things though . Did manage to find a bit of order to it this time too. I absolutely love the fact all your main rifles are of older designs. G3A3 slim, M16A2, M4A1. Proper guns heroshark 1 Link to comment Share on other sites More sharing options...
heroshark Posted June 23, 2019 Share Posted June 23, 2019 5 hours ago, Iceni said: I absolutely love the fact all your main rifles are of older designs. G3A3 slim, M16A2, M4A1. Proper guns not a fan of modern rifles even my 416c is old schoolified Iceni 1 Link to comment Share on other sites More sharing options...
Hermesh Posted June 23, 2019 Share Posted June 23, 2019 On 24/04/2019 at 18:29, Vaware said: TM HK 416 Delta for my son, Umarex 417 D for me😁 Very nice, my 416 is kinda like the bastard son of these two.... Link to comment Share on other sites More sharing options...
Hermesh Posted June 23, 2019 Share Posted June 23, 2019 And few more - Stratton Oakmont, Tackle and Tec-Spek 3 Link to comment Share on other sites More sharing options...
Popular Post heroshark Posted June 23, 2019 Popular Post Share Posted June 23, 2019 Seemed silly to mention it and not post . Recently found a lower front sight which is a much better always niggled me. Also added a Decepticon sticker and labeled my ejection port. All the important upgrades. Druid799, two_zero, The captain and 3 others 4 2 Link to comment Share on other sites More sharing options...
mightyjebus Posted June 24, 2019 Share Posted June 24, 2019 Not quite what it seems like. Fake TM MK18 NGRS. Started life as an Army NGRS (copy of TM NGRS). I had a few TM parts floating around including upper and lower receiver. Ordered most of the MK18 parts from Aliexpress and had to mod the GBB sling plate to fit the NGRS. Internally it has a Gate Titan for NGRS fitted and flat hopped. FPS is around 330 and it's putting 28's out to around 65 meters. Only thing differnet is the pistol grip and that's because I find the A2 style pistol grip uncomfortable to hold long term and i's missing the side sling loop which is in the post. The flash hider came with the silencer and fits tightly to the front of the Mk18 rail. Druid799 1 Link to comment Share on other sites More sharing options...
Hermesh Posted June 24, 2019 Share Posted June 24, 2019 3 hours ago, mightyjebus said: Not quite what it seems like. Fake TM MK18 NGRS. Started life as an Army NGRS (copy of TM NGRS). I had a few TM parts floating around including upper and lower receiver. Ordered most of the MK18 parts from Aliexpress and had to mod the GBB sling plate to fit the NGRS. Internally it has a Gate Titan for NGRS fitted and flat hopped. FPS is around 330 and it's putting 28's out to around 65 meters. Only thing differnet is the pistol grip and that's because I find the A2 style pistol grip uncomfortable to hold long term and i's missing the side sling loop which is in the post. The flash hider came with the silencer and fits tightly to the front of the Mk18 rail. Is that the PTS front grip that can hold a lipo? Link to comment Share on other sites More sharing options...
mightyjebus Posted June 24, 2019 Share Posted June 24, 2019 it is but I'm using the TM stock for the battery. Modded it so that I can fit a lipo in the side of the crane stock. Hermesh 1 Link to comment Share on other sites More sharing options...
Tony.S Posted June 25, 2019 Share Posted June 25, 2019 GHK AK105 - I got a few cans of paint so naturally I sprayed everything I could It just needs a lot of wear and then it'll be perfect! NeatBeard and Stratton Oakmont 2 Link to comment Share on other sites More sharing options...
SgtTalbert Posted June 26, 2019 Share Posted June 26, 2019 Tokyo Marui FNX 45 with TM Pro Sight MikeMarden, Eenthuncob and ProPain87 2 1 Link to comment Share on other sites More sharing options...
The captain Posted June 27, 2019 Share Posted June 27, 2019 On 01/05/2019 at 21:58, DarkAssassin said: Very nice!! Have one too, although mine is a little modded, was once a TM bro i have the TM and i desperately want to put a torch on it. how did you get the rail along the bottom ? and it looks like you have one on top too. are there any standard parts left on your gun ??? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now