Leaderboard

Not at all. Your criticisms are entirely valid and I accept that. But you've oddly mistaken a rebuttal for something it just isn't. You're free to openly criticise my post in this thread, just as I'm allowed to reply to said criticism. I've taken what you've said (and Rogerborg) on board and reduced the price. So I do appreciate that. There's not much else to it, if you were expecting a hissy fit then I'm afraid we're at an impasse. Hopefully the next person will prove more entertaining?

Designed a custom hex sight for my glock the other week forgot to post it on here. still needs some tweaks to the fit but its strong enough to rack the slide with

For what it's worth Jay, I thought your advert was fine. Well written and descriptive with good photos. Thought the price was fair for what you got too... Leagues above the normal advert we're used to seeing on here, keep them like that and you'll be fine

I have JayHawk ahead on points, you're going to have to go for a knockout.

Specna Arms H-05 really happy with this rifle. Skirmishing this weekend hope I’m still happy after Sunday. WE T-Rex Hi Capa with an osprey 😎

Finally all packed and in the post box as of tonight. Should have them by Saturday.

Patrolbase putting out Specna Edge M4s for combat machine money! Absolute stonking bargain!

Eh, that's a minor sin, it's clearly described in substantial detail, even down to the postage and payment method. I wish more ads were like that.

Look at Kaizen tool foam, I purchased mine from a website called rutlands. Picture included of how my pistol case looks.

A nice little place to put my pistols!

My first double header tomorrow! Morning and afternoon skirmish outdoors at a "mystery" location for an all new South East Tour review and a rare evening at Bunker 51 CQB to keep the UKARA ticking over.

I am an idiot - yes that is the AEG you got it right. See? Getting meself confused. The GBB grip is thinner and the real dimensions as is the receiver

I thought it was totally fine initially too tbh. I mean, one and a half pistol and 7 mags. 7 fucking mags.

Not for long

Shifting around some storage at home, quick updated family snap

I used to get that on my GHK; the BB follower would get caught on the part that had the feed lips leaving 2 bbs bouncing around. A quick file job inside to round off the edge allowed it to feed correctly (just saying incase it happens again with new BBs, ya never know... plus what others have said )

Kwa Ronin 2.5c

Happend to me. I have just feeded some more bbs in the mag and then spray them out on full auto. Fixed the problem - and it was also a mix of tracers...

@FreeFrag.UK it's a nice add on, but absolutely not game changer However if you have small hands, like mine an extended mag release button can make a difference

@Fissure Probably easier to sum it up from the parts I have purchased: Strike Industries: Trigger guard / SI Fang: Can be made to fit, although I haven't started with that yet. Probably can force it to fit aswell but after what happened with the safetely selector, I'm a bit more careful. Takedown Pins: Do fit without modification, must use the original SI detentpins though. Buffertube: Is milspec and does not fit, either the buffertube or the upper must be re-threaded. Flash hider: Real steel threads, advice is to get a outerbarrel extension to get that re-threaded so you do not lose your 14mm ccw on your original outer barrel. Foregrip: Milspec m-lok, fits the SI rail obviously and will fit any rail aslong as the m-lok uses the proper dimensions. Rail / barrelnut: The rail itself lines up with the upper perfectly, the upper needs re-threading for the barrelnut though. Safety selector: Does not fit, also do not attempt to fit it. You will need to hammer it out as it will lock itself in there. So far I have only damaged the detent pin but my trigger was sligthly bent aswell (managed to restore that no problem though). Stock: Fits perfectly on the SI advanced buffertube, I just returned it because my frame (as in my body) is too big for such a small (it's really small) stock. Anti-walk/rotation pins: Will not fit as the pins in the MWS are fake. Multifunction endplate and anti rotation castle nut: Fit a milspec buffertube, see the buffertube. Ultimate Dust Cover: The dust cover itself fits, but cannot close due to the ejection port on the MWS being too small, can't really be modded. Aslong as you leave it open it's not a problem (unless you think otherwise). Magazine release: The mag release button fits on the MWS lever, which is what I'd suggest doing. The SI lever has to be filed down too much to be reliable in the longer term, wouldn't surprise it would break sooner or later after filing it down. Bolt catch: Will not fit and can't really be made to fit as the MWS has a proprietary system which simply doesn't work with a real steel one. *EDIT* Forward assist: Must be filed down to fit, will lose the MWS' original option of it actually functioning though. * EDIT* MagPul: Pistolgrip / MIAD 1.1: Fits like a glove, must use the original MWS screw though. MFT: Stock: Fits perfectly on the MWS original buffertube, very slight movement on the SI advanced buffertube. Think that sums everything up. All in all, to fit real steel you'd probably be better off with a GHK or WE 🤣.

My Ares striker, originally an as01 but looks more like the 02 now 😂

New iron sights!

Like this? Yep, that's my cqb mask. 3D printed, painted and steel mesh glued in.