The 'What have you just bought' Thread

[Alimcd]

My “be a total tosser” response was itching after finishing a nice, restrained M14 build so I’ve gone and bought a Gold Airsoft Masterpiece Hi-Capa frame 

[Asomodai]

So a retailer had me over on a Nikko Stirling Mountmaster scope. Was told it was back ordered till about October despite being told 14 days on ordering. 

 

Asked for my money back, I just picked up a heavily used Phillipino Simmons Whitetail Classic 3.5-10x50 for a little over 50 quid. 

 

The air rifle forums seem to like them so hoping for good things on my SRS.

[Alimcd]

On 21/03/2021 at 11:02, Alimcd said:

My “be a total tosser” response was itching after finishing a nice, restrained M14 build so I’ve gone and bought a Gold Airsoft Masterpiece Hi-Capa frame 

Scuppered. Not for the first time is something showing on Bunnyworkshop’s website not available.

 

Wasn’t to be

[CrackCommandoUnit1972]

Tune up kit for my cm.702 sniper. 

[Steveocee]

2 hours ago, Alimcd said:

Scuppered. Not for the first time is something showing on Bunnyworkshop’s website not available.

 

Wasn’t to be

 

Give Hi Capa Hub a shout, he's just messaged me a picture of some AM frames.

[Alimcd]

1 hour ago, Steveocee said:

 

Give Hi Capa Hub a shout, he's just messaged me a picture of some AM frames.

 

He's got a black 2011 one in that order with my name on it. Probably for my own sake, he didn't get any gold

[Guest]

[Spartan09]

Well, i decided "fuck it, whats another £170-odd on my credit card"  and bought myself an S&T M320 grenade launcher.

 

Mounted it on my tippmann via a set of m-lok to picatinny rail adapters i bought a couple of months ago.

 

I did find that the launcher had a lot of wobble on the rails, so i found a pair of screws in my toolbox at work and used them to pin the launcher...  just need to trim them down a few mm and paint them black so they dont stand out.

 

Edit.

also set up an account with enola gaye, and will be ordering some pyro from them next week

Edited March 23, 2021 by Spartan09

[Asomodai]

Its a gear day rather then a RIF day! 

 

Invader Gear Revenger BDU Italian Vegetato

Invader Gear Revenger BDU Combat Trouser Italian Vegetato

Invader Gear Flannel Ubacs in Blue

Invader Gear Boonie Bush hat in Vegetato

x2 Viper Shotgun Cartridge holder

MFH Large Radio pouch in Green

Z-Tactical Xo29 Bowman style Headset Evo 3

Z-Tactical TCI PTT Z114

 

I really hope the sizing of the clothes is correct for me! 

 

[GothicGhost]

New stock for my carbine kit

[alxndrhll]

The arrival of my Ferro Mini Dangler and Crye Stretch Flap sees both of my chest rigs finished (at least for now). The AirLite is set up for when I’m running an AR or AK74, the Microfight is setup for running pistol only in CQB or my VSR (turns out Spiritus Pistol inserts take VSR mags pretty nicely).

 

And a Vortex Crossfire, pair of NGRS mags and a Laylax NGRS wrench for my birthday from my long suffering girlfriend.

 

[Barny]

On 21/03/2021 at 20:15, Asomodai said:

So a retailer had me over on a Nikko Stirling Mountmaster scope. Was told it was back ordered till about October despite being told 14 days on ordering. 

 

Asked for my money back, I just picked up a heavily used Phillipino Simmons Whitetail Classic 3.5-10x50 for a little over 50 quid. 

 

The air rifle forums seem to like them so hoping for good things on my SRS.

 

I've one similar - its a 44mm - on my Air Arms S410. Lovely scope and i'm sure you'll like it too 😊 

On 20/03/2021 at 13:34, C-Diddy said:

I recently picked up these from Real Airsoft UK on eBay:

 

For clones they're pretty good. Only issue i have is, to get the correct eye relief on the G43 I've had to remove the rear iron sight. the G33 may have been a better option for me. Package had the 558, G43, batteries, Scopecoat, EoTech stickers and a really solid storage box.

 

 

 

Hi, Would you have a link for these please, my googling skills are falling short tonight 🤦‍♀️

[C-Diddy]

38 minutes ago, Barny said:

 

I've one similar - its a 44mm - on my Air Arms S410. Lovely scope and i'm sure you'll like it too 😊 

 

 

Hi, Would you have a link for these please, my googling skills are falling short tonight 🤦‍♀️

Annoyingly it doesn't seem like they're available from the same seller I used. You could always contact them through eBay to see if they still stock them 

https://www.ebay.co.uk/str/realairsoftuk

If not, this looks similar, if not identical, standfast the extras I got like the ScopeCoat and batteries etc:

https://www.ebay.co.uk/itm/Holographic-Red-Dot-style-XPS3-558-Airsoft-Scope-Sight-G43-Magnifier-/294056673191?_trksid=p2349624.m46890.l49292

[Skara]

Bit the bullet and ordered a Combat Union AK hop chamber along with a sling for my 74u

[leadly]

 

This bad boy turned up yesterday! IBe fires it and oh my, a big daft grin quickly appeared on my face! Not tested it at range as their is too much stuff in the garden to break if the spread is rather wide! It will definitely upset someone!!

[PopRocket123]

2 hours ago, leadly said:

 

This bad boy turned up yesterday! IBe fires it and oh my, a big daft grin quickly appeared on my face! Not tested it at range as their is too much stuff in the garden to break if the spread is rather wide! It will definitely upset someone!!

I want to print a taser that takes one of these. I think that'd be great fun to have with a police loadout. 

[Asomodai]

Ordered some original Russian uniforms from DGBakery. (At great expense)

 

2007 FSB Government Contract Sniper Suit 56/58-6

 

 

SOBR Black Moss Suit with Patches. 

 

 

 

 

 

Edited March 24, 2021 by Asomodai

[alxndrhll]

First delivery of repro Zenitco parts for the Krink arrived today. Extremely excited for this all to come together, fingers crossed fitting the hand guard won’t be too much of a pain! And y’know, praying the Krink itself turns up at some point when it’s released from the clutches of UPS.

 

Edited March 24, 2021 by alxndrhll

[FreeFrag.UK]

Finally found an airsoft version of the SA80 Bayonet. It fits my ICS L85A2 with repro Surefire flash hider and in theory I should still be able to fire with it on the rifle although I suspect it will largely live in a sheath.

 

Now I just need to get a surplus MTP sheath for it and the black plastic component (think it's referred to as a bayonet frog?).

 

Once I've sorted out the sheath I guess I'll finally sort out my comm's and a batch of new mag's for my L85.

 

 

[Shamal]

13 minutes ago, FreeFrag.UK said:

Finally found an airsoft version of the SA80 Bayonet. It fits my ICS L85A2 with repro Surefire flash hider and in theory I should still be able to fire with it on the rifle although I suspect it will largely live in a sheath.

 

Now I just need to get a surplus MTP sheath for it and the black plastic component (think it's referred to as a bayonet frog?).

 

Once I've sorted out the sheath I guess I'll finally sort out my comm's and a batch of new mag's for my L85.

 

 

Careful you don't cut ya fingers off. That looks sharp!

😉

Regards 

[paradoxum]

Element Gear 2020Ver. DBAL-A2

 

https://www.egtactical.com/laser-sight/70-86-2020ver-dbal-a2-laser-pointer.html#/39-color-dark_earth

 

 

[Guest DrAlexanderTobacco]

5 minutes ago, paradoxum said:

Element Gear 2020Ver. DBAL-A2

 

https://www.egtactical.com/laser-sight/70-86-2020ver-dbal-a2-laser-pointer.html#/39-color-dark_earth

 

 

Good stuff, but please be careful with it - 5MW and 10MW for vis and IR respectively is pretty high power and will damage eyesight.

[Speedbird_666]

@paradoxum Please tell me that you are not intending to use one of these whilst actually playing?

 

 

 

[Tackle]

1 hour ago, paradoxum said:

Element Gear 2020Ver. DBAL-A2

 

https://www.egtactical.com/laser-sight/70-86-2020ver-dbal-a2-laser-pointer.html#/39-color-dark_earth

 

 

 

[rj1986]

On 19/03/2021 at 19:52, Dracon said:

My new ghk urgi first from new gbb.

Looking forward to sites opening to get it going

I see you got the Australian Export model