Leaderboard

Adds 50% to the retail price, legit. https://www.airtac.me/shop/p/fully-upgraded-stickers?rq=stickers

Knocked up a PC stand Buulders are in, plenty of useable off cuts and a router helps Really helps when changing pouches around etc

Thank you chaps. I finally got this done. Rewired completely with better quality cable. Gearbox had to be rewired as too short. I Found space above hop adjuster wheel for connectors from the gearbox. The board is up front tucked in a perfect size groove and semi permanent due tt industrial velcro. Initial thoughts. Better trigger response, programming easy even for a technopeasant like me. Added a little active brake to take pressure off if spring. Rof 1 notch burst set at 3.It's very good. Burst 3-4 but more 3 than 4 given its not got sensors or require gearbox being opened to instal sensors or such its amazing. It's brought my Cyma g36c up to date for a reasonable price and I'd reccomend the AB++. You'll need to be handy with a soldering iron and basic wiring. It is straight forward. Oh and soldering iron must be earthed and ideally for circuit board type work and zero residule volts through the iron tip or you could pop the components. If you're local to nn4 I'll fit it for you for cost of parts used, few connectors and cable. It's a definite hit! My Cyma is probably the cheapest gun to buy that I have. It is just spot on for me, it fits me perfectly, I've spent loads rebuilding the v3 gearbox with top quality parts, bearings, uprated hop and pommy barrel. Would have been cheaper to buy a TM one! It's also been a massive learning curve for me and now confident pulling these apart. Ove put pommy barrels and purple hop rubbers in both MP5's just the ump to go (H&K fanboi)

Just want to say a huge thank you to all forum guys who have watched my content and engaged with me some how. My channel has hit a milestone and also a large mental personal goal for me.

I went to my Doctor and asked for help because I’m getting married soon and I can’t get over my fear of wedding vows, I was hoping he would know of a cure. He replied with “I can’t say I do” And I thought “oh no, not him as well!”

Stayed up all last night trying to remember if I had insomnia or amnesia.

Yeah! 😂 Might have to make a mk2 and adjust the height of the crossbar to make it slightly less religious, but more importantly actually lift my pc a couple of inches higher 👍

You could crucify dwarves on that.

Sorry to hear that. Did she find the receipts? (Too soon?) I'm not clear on what your priorities are. "Not on show" and "not too messy" sounds like you want them inside some sort of structure, rather than just bin bags and a tie-down strap holding them together. Do you care if it's secure? Are you after something more, or less, complicated than a Björk cupboard from Ikea?

I'd be interested to know if they have improved the mechanism (I doubt it) Could you compare the new and old one?

Same. I sold mine for around 220 a month ago which was fully upgraded admittedly without a smart MOSFET system. Didn't exactly get snatched up immediately either. This is a rip off.

I remember few years ago I brought one in sale for £150 from taiwengun .

Geoff's do bio ammo in heavier weights.

It's the same argument you could have with the ghillie suit in general. It's not as if it's something that only im allowed to wear. I've never seen any none ghillie wear it on their leg and I wonder if the site owners would have any issue with that? But as a counter question, what about some of the sites that operate bands Vs none bands? Is one team cheating? And also, (sorry for the incoherent format of this reply, just woken up after a night shift), what's the purpose of the band? To denote who's team your on or to make you stand out? Because as some of the replies to this topic would suggest, they're sole purpose is to make you stand out should you be trying to be sneaky and hide from the enemy team.

Bought a Clone Surefire warden , arrived within 14days , no customs charges item was marked down to £10 on the shipping invoice Must have got them on a good day!

Added some fans to my helmet. Beep boop. Will see how it goes.

I obviously need to go back and watch this, my gun is featured in this video:

I spray a bit of chrome silver paint onto a sheet of paper and lightly dab one of those kitchen sponges (small square with green scrubber on back) on the paint, then lightly brush the corners and wear points on the Rif with it. you can use the yellow side for full wear and the green fuzzy side for leas heavy wear Looks just like wear, but you can take it off if you do it wrong and looks less artificial than wire wool scratches, and it works fine on plastic TM's

Graduation present for myself lol. TM Glock 26 with Nova kit. I prefer the back barrel.

I love that, dunno what to do to my recent purchase to make it “mine” So Kydex Customs recently launched their own budget line of holsters, a kinda Tesco’s own brand, called Bare Bones. My needs are still there, but my finances just now are seriously restricted as we are spunking MEGA on home renovations, so SWMBO is watching the spending. Not closely enough to notice me getting this delivered to the other address to get received by the builders 😉😂 Wanted to try this out, cheap - £30 delivered Beautifully made, and holds the TM tighter than a Fly’s chuff

Bargain gas nbb 8mm M1 Carbine on Action Hobbies right now. £150.00.

Cheating, armbands is the clue in the name of them...

Just treated myself to a HAO MK16 rail for the TM MWS. Really pleased with the quality - feels very solid.

decided to make my own gun case. It's not the neatest but it works. Bought a tool box from b&q, hardboard, pick and pluck foam and a few cans of plasti dip. I made it three layers with the bottom one glued to the base of the box. With the pistol layer I can pick the foam out for other attachments if needed and just plasti dip that section again to firm it up. All the layers also have foam under each piece of equipment.

Hello all. As some of you may know, my marriage ended a few months ago. It was foreshadowed for a while. My ex is buying me out, so I am going to be out of a 3-bed house into a very small, rented studio room/flat (At three times of the cost per month of my mortgage mind you). In preparation for this I have sold approximately 20 odd rifles over the past few months, I have 9 left, of which two will be for sale when tested. I have resolved to keep the remaining 7 (With another FAMAS being an eventual purchase, so will need room for 8.) I currently have boxes for 5 of them, plus lots of rifle bags. I want to be able to store them in my eventual room in the smallest space possible, so they are not on show, don't take up much horizontal room and not look too messy. So, bags are out as it is just too messy. I want the rifles to be stacked vertically in the smallest floor footprint as possible. It's bad enough that I have loads of gear as well that needs to be stored as well, but the rifles are the biggest annoyances. Any out of box suggestions? (The rifles I have decided to keep, because some people seem to like updates on what I have :P) TM Famas PTS PDRC ARX160 JLS RX4 E&L AKM LCT AMD-65 Silverback SRS