Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 16/04/22 in all areas

  1. Also Allo Allo, what's all this then?
    4 points
  2. Tackle

    Fps/Joule Limit

    That's cos we're all non-binary Soft Southern Jessie's down south, its alright for you tough northern monkey's πŸ’ 😜
    3 points
  3. Just picked this up SIG 551 For some reason I can only upload pish resolution pics πŸ€·πŸ»β€β™‚οΈ
    3 points
  4. It is a total mess for DMR's though. Honestly the reason I'm looking into HPA, so I can adjust to DMR limits or run at 1.1j depending on the site. Also None of this makes sense. 370fps on a .32 is 2j.
    2 points
  5. I made sure I learnt the correct wording for this at the very least before I embarrassed myself in my first post πŸ˜‰ Just as a general update, I went for my first skirmish today at Outpost Airsoft and had a fantastic time, will definitely be going again soon! The people there were great and it was incredibly well organised! I will absolutely recommend to anyone on here based in and around d the North West, or for anyone that doesn't mind travelling πŸ˜„
    2 points
  6. All good advice above even an experienced forum dweller falls fowl of some items bought used. Ive just bought a β€œcared for β€œ rif on a used selling website I asked all the right questions, got a video sent to my mobile of it working confirmed what was included etc,etc Then the rif arrived with a couple of small niggles, nothing to stop it working but it was jammed when it arrived with me and needs maybe Β£30 of parts fitted to make it operate like it should When I contacted the seller about the problems, ten minutes after it had arrived I add, I got the stock answer of ”it was fine when it left me mate” So beware, the Parcel Force pixies are able to get into a wrapped box and lock a charging handle back and fcuk the release lever πŸ™„ Just as well I paid PayPal G&S and not bank transfer like the seller wanted Im able to raise a dispute if he doesn’t do the honourable thing and help cover the costs Success will be limited, but I’m in with a chance at least
    2 points
  7. Praise capitalism and buy more guns, you’re keeping the hobby afloat. I’ve just treated myself to a set of Pandora arms wooden Hi-capa grips, clone Vortex Viper RMR, JLP Capa RMR mount, TM MP5 drum mag and a Laylax 430mm VSR barrel. (not all for the same gun I might add before @Adolf Hamsteraccuses me of more heresy)
    2 points
  8. 2 points
  9. Druid799

    Firearm ban

    WTF ?????😳
    2 points
  10. A year later mid April 2022, I have Specna e-14, Specna h-11 and CYMA 097f and all of these guns great, I don't know if luck is following me, or guys in CYMA and Specna are doing pretty good job
    2 points
  11. Fixed that for ya 😜 (I'm not pedantic much😬)
    2 points
  12. I hear that Yoko Ono has a daughter who sells Japanese dresses. Kim...
    2 points
  13. That and the forward assist spring.
    1 point
  14. Cannonfodder

    Fps/Joule Limit

    That's where you went wrong, please don't do it again From what I can decipher from that word salad is that you're moaning that you took a hot gun to a site and couldn't use it. Next time check beforehand as not every site has the same power limits
    1 point
  15. Hi, ALL! πŸ‘‹ Two year later and hopefully getting better, looking back now? πŸ€ͺ Doing the best with what I have, enjoy it for what it is! πŸ”«πŸ˜ŽπŸ‘ πŸ’·GAMBLEπŸ’·
    1 point
  16. GAMBLE

    Gamble

    Hi, ALL! πŸ‘‹ Two year later and hopefully getting better, looking back now? πŸ€ͺ Doing the best with what I have, enjoy it for what it is! πŸ”«πŸ˜ŽπŸ‘ πŸ’·GAMBLEπŸ’·
    1 point
  17. Hudson

    Fps/Joule Limit

    First of all; big necropost. πŸ˜… Secondly; UK law doesn't recognise DMRs or anything like that regarding Airsoft. You have the legal limit for single action and semi automatic at 2.5J iirc, but for safety's sake, sites will obviously set it at a lower level, which for DMRs is generally anything from 1.48 to 1.88J (Approx 400 to 450fps when measured on a 0.20), or 2.3J for single action rifles, but that's for safety & insurance.
    1 point
  18. Reminiscing of my last day out. SRS made it like shooting fish in a barrel. Even the cheeky shot's you shouldn't try were landing.
    1 point
  19. Niktimes3

    Fps/Joule Limit

    I think sites in the south need to rethink there DMR rules for woodland/ outside games as I’ve had my m4 dmr for 2years. I played today with it and was told it’s to hot 370fps 1.41J on a 0.32 BB the site lim is 1.40J. Around my way the site limits range from no J just 420fps. 1.64J no fps stated, 1.40j or the best one is a site that banned dmr but snipers can run at 500fps i think the uk law is 450fps & 1.85j For a dmr
    1 point
  20. It should be usable enough with the stock M90 and 0.28g. The Specna rotary hop unit is pretty decent, so its effective range won't be much short of anything else out there. It just won't reach out quite as far as something tuned for bang on the site limit. However, at that extra 5-10m you're rarely going to get hits anyway. I'd run it as stock at least once to get a baseline in performance and see what the site chronograph says, then make a spring change decision based on that. It's always better to come out 0.1J under than any amount over.
    1 point
  21. Bugger! I was thinking of going but the age limit is 18. That's me out and probably a lot of other older players..... πŸ™
    1 point
  22. For Zod's sake, i need help. 🀦🏼 Just bought a G&G SMC-9 I was looking for a compact SMG, and I already own the GTP-9 and like it a lot, so..... I must stop buying gnus!
    1 point
  23. Speedbird_666

    Firearm ban

    Well, that was a helluva first post on a very dead thread.
    1 point
  24. 1 point
  25. DestrO

    Scorpion evo boneyard

    wouldnt pay more than Β£150 max.
    1 point
  26. To be honest, the seller needs as much scrutiny as the rif itself, easily done when shopping on forums. Look at how long a member, kind of feedback, post count & maybe have a look at the quality of his posts, if he's spamming/poor attitude/thick as shit, I'd be reluctant to consider buying something with complicated moving parts etc. Also, regarding the rifs, if the seller is the first owner - IT'S SECOND HAND if its like new- IT'S SECOND HAND if it's only been skirmished once - IT'S SECOND HAND Don't get sucked in to any of the bs, once a rif leaves a shop for the first time it's second hand, open to abuse or excessive use, or just natural wear & tear that will at some point lead to failure. & again, irrespective of alleged god like condition proclaimed by sellers, NO WARRANTIES APPLICABLE, no matter how much your paying over the odds, YEAH I'M LOOKING AT YOU @avenger63😜. As for what to actually buy, find what you like the look of, look to see if it's been reviewed on here, if not make a thread asking about it, in no time at all you'll be inundated with responsesπŸ‘
    1 point
  27. Nick G

    Gun picture thread

    And decent pic with the bayonet fitted . Father in laws old bayonet. They don't like it up 'em !
    1 point
  28. AlphaBear

    THE TM MWS thread

    To be honest the AG npas nozzle ain’t that bad. I mean it’s not great either. The only thing you have to worry about it the screw valve thingy Bob from ejecting itself loose into the barrel. We have heard stories of it happening to a few people. Nothing that a dab of thread lock won’t fix. Now how durable the AG nozzle is is open to debate. We did have some guys on here who swore by it and said it worked well for their setup. I confess i have one myself as I buggered up the Marui nozzle after NuprolGate and needed a nozzle ASAP. I used it to only plink squirrels in the garden but then managed to grab a Marui nozzle. It’s there as a back up though in case I need it.
    1 point
  29. MalcyFett

    THE TM MWS thread

    Dave told me off last time I mentioned my AG drop in nozzle, but the one I've got is holding up ok currently (approx 2k rounds in). I should add though, once I can find somewhere with either the TM or the GM in stock, I'll be swapping over.
    1 point
  30. Davegolf

    THE TM MWS thread

    No AngryGun or Nuprol parts in MWS's please πŸ˜–
    1 point
  31. 1 point
  32. I did a stand up routine for a talent show once. I had a damn good joke about a fat badger, but I couldn't fit it into my set.
    1 point
  33. Alimcd

    Gun picture thread

    Been fiddling with something a bit unusual. GHK G5 in an SRU kit with an internal AEG mid cap HPA adaptor Giving a steady 1.1J and making all the noise doing it
    1 point
  34. A Guarder slide for my TM G19 from @BADGERF1ST, and just fitted . with flashbacks to the last glock I did probably 10yrs ago I was prepped with the full tool kit , needle files , pry bars and hammers … nope , it dropped straight on and that was that πŸ™ƒ
    1 point
  35. It certainly does at a funereal.
    1 point
  36. Ache a touch? My whole dam body hurts! πŸ˜‚ Totally worth it though, had a lot of fun πŸ˜„
    1 point
  37. TheGrover

    Firearm ban

    Sounds like the copper was just trying to stay on the safe side. In legislation, an airsoft gun (that isn't modified to be crazy powerful) isn't a firearm. The easy way to test this is to shoot someone. If they could potentially be killed or suffer life changing injuries as a result, then it's a firearm. If they just swear at you and shoot you back, then they are a real airsofter and you're just pratting about with toy guns
    1 point
Γ—
Γ—
  • Create New...