Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 01/12/21 in all areas

  1. Druid799

    Gun picture thread

    Now normally I’m definitely not a “guns done !” sort of player as I’m always want to change this’n’that with my guns , but after getting an ‘old school’ red dot from these very forums(very BIG shout out to @kistofurryfor it) I honestly can say I’m really happy with it now and can’t see anything I want different on it . Now that’s nice .
    5 points
  2. The zero in forums goes down more than a £20 prostitute
    3 points
  3. His mum's unplugged the Amiga to plug the Dyson in. She won't be long. If he cleaned his bedroom more often there'd be less for her to do tbh.
    3 points
  4. It's OK, I hear they're biting the bullet and finally upgrading the Commodore 64 to an Amiga.
    3 points
  5. Baby 👶 😉
    2 points
  6. A mere pup lol ! (53)
    2 points
  7. Yes! I win! Well... lose. Never too old to start, there are plenty of us... around that age... still kidding ourselves that we can keep up with the speedsofters and rentals. Speaking of which, have you rented and played yet?
    2 points
  8. I got it! All I had to do was hit it a couple times and smack the hatch in place lol. I didn’t wanna hit anything to hard or end up breaking something but I guess that’s how it’s supposed to be closed. thank you all for the help.
    2 points
  9. Zero one is down? I suppose the one good thing about that place is that it keeps the fuckwits away from here
    2 points
  10. tworow2

    TM MP5 NGRS Owners

    The Madbull Raptor MP5 suppressor fits and locks great, for the record.
    2 points
  11. This happens every so often. Comes back sooner or later. Most people nowadays only use it for classifieds.
    2 points
  12. Practically a youngster 😂
    2 points
  13. I bought some of the Smiths a while back purely so I had a set with a battery pack that's easily relocatable, but I've owned a couple of pairs of ESS Turbofans for.. more years than I can remember. I rate kit the most if it basically vanishes while in use and I don't notice it and the ESS fall well in to that category. I've got plastic mask lower halves zip tied on, I put that combo on my face with the fans on the low setting and go about my game with no worries at all. Being the cheapest of the 3 I'd say go with the Revisions unless you want a specific colour or to move the power supply; but all great eye pro that I couldn't do this hobby without personally.
    2 points
  14. Take more water with it. Looks like you got the shakes lol 😉 Regards
    2 points
  15. Hi all i am new to airsoft and just want to say hi and maybe at some point get help with everything from decent BB.s to buying a rifle and turning it into a DMR as there is so much to choose from i get lost
    1 point
  16. Didn't stop me....
    1 point
  17. Niiice! But can you look down sights with it on. 🤔 Regards
    1 point
  18. MagpieTactical

    Gun picture thread

    So you bought that sight. I had been looking at it too. Certainly looks the part on there.
    1 point
  19. isn't that a coronal mass ejection?
    1 point
  20. I get that after eating too many sunflower seeds.
    1 point
  21. I changed the hop rubber and the barrel to a Prometheus unit gave a little more range but better accuracy I didn’t touch the internals, but after chronoing it on site, I probably would have changed the piston head & spring to get a bit more fps out of it
    1 point
  22. I am limiting myself to this until I have my UKARA, then I will buy a side arm. hopefully it won’t make my broke but knowing my luck I will get so much I won’t know what to use.
    1 point
  23. Rogerborg

    CYMA Mains Adaptors

    Tamiy and Mini-Tamiya can be fitted just with just cut-strip-and-crimping, no soldering required. I suspect that's one reason why they're still commonly used over Deans or XT-60. What's it for? Target plinking, or airsoft skirmishing? The Thomson would be skirmishable, although I'd want to get the energy a bit higher, and finding more magazines might be an issue at the moment. The Kar98 shell ejector is a target plinker only, it'd likely be great fun for that, but with 5 shots, easily lost, I wouldn't take it out on an airsoft field except for pose value. Any bolt action sniper is a poor choice as a first-or-only gun, as snipers are generally built, not bought, and you'll need a secondary as well for close range. See if you can find a fuse and check, replace, or bin it off. If the batteries have charge, you should be able to hear some sort of response from the motor, even if it's just complaining. Airsoft guns are also prone to locking up, where the spring is pulled almost all the way back but not released, then the motor lacks the startup torque to pull it the rest of the way. When motors stall out like that they pull a lot of power, so you may be able to feel the wires, grip, and/or battery heating up if you pull the trigger - this is also a good way to pop the fuse or burn things out, so I wouldn't recommend doing much of it. If it has locked up, you can (in an ideal wold) sort it with a freshly charged or higher voltage or C rated battery, or if not, have to disassemble it and manipulate the anti-reversal latch - I keep a bent kirby grip in my toolbox for this. Sorry, I have no idea about the disassembly procedure for that model, although YouTube might provide some hints. The unlocking should be something like this. The other way to unlock a gearbox, which will have Reddit gasping in horror, is to get it apart far enough to access the gearbox nozzle, then shove a long Allan key or screwdriver up it and push the piston back yourself far enough so that it completes the cycle, being aware that it will then eject the tool forcibly, and you should of course never, ever try this (I've done it a few times). The other possibility is simply a bad wiring connection somewhere, which you'll have to track-and-trace with your multimeter, starting at battery and motor ends and working towards the trigger. If you do have a (plastic) V3 style gearbox then all to the best as trigger contacts tend to be external rather than internal. Again, YouTube will provide, you're looking for "V3 gearbox trigger contacts" or similar. Sorry to be so long winded and vague, most airsoft gun issues are easy to fix, but take some time to diagnose, and are tricky to guess remotely without actually going hands on. If you're intending to stick with airsoft, you might want to view the CM.022 as a cheap way to learn some teching. Many of us have a project gun that we keep around just for tinkering and larks. Holy heck, I missed that. I thought the last exemptions for those were long since phased out.
    1 point
  24. I'm 53 , have a team mate who is over 60 and I know there are quite a few 'senior' folk on here. We all just play our own style of games at our own pace and leave all the running about like their hair is on fire to the cannon fodder , sorry, youngsters while we have a cuppa nd a nice biscuit before providing support 😁
    1 point
  25. Hi All Thanks for the replies; it is a two-tone for a start... so thats all good. Half of it is blue. On the charger front, I've attached some pictures; you'll see the connectors - and also the larger 700mah battery that came with the gun, then the 'replacement' I got sent that still doesn't make the gun work.... which leads me to thinking is the charger. I bought a multimeter and the batteries show voltage... the charger doesn't when plugged in - but not sure if thats only because it outputs stuff when something is pulling on in it. I could solder a tamiya connector on both ends, locate a tamiya-style charger and do all of that... just 'should I'... is the question... I will most likely get my son a replacement - theres a couple from Patrolbase I was looking at either the CM033 Thomson AEG or the DoubleBell Kar98 spring rifle... Any other recommendations? Just annoying that you buy something... it stops working after 6 weeks with very little use and the retailer after a lot of pushing sent a battery that wasn't the same and then after that has basically given up. Very frustrating. Won't be using them ever again. With those photos if anyone has a charger they don't use anymore and are willing to part with it... let me know
    1 point
  26. Good points and I appreciate the advice. I wasn't referring to having the kit be Instagram worthy in that way I just meant more in a sense that it looks good I just used that wording because the other poster mentioned it in that way. I should have put quotes around it to emphasize that though. I'm not interested in likes, in fact I don't post much on Instagram at all or any social media as I just don't have an interest in it. I just want to like the way my kit looks regardless of what anyone on the field thinks of it however my main point was that I don't want to go full practical and have a kit just full of pockets or like some cheap low quality gear that is only there for the purpose of storage and being accessible and looks hideous. Hell yeah dude. Black SWAT is sick as shit. I was considering it when I saw a picture of someone wearing it but I just like the look of the goggles and the ghillie cloak slightly more than just full black. Amen and I totally agree. As I mentioned to another poster perhaps saying "Instagram" look was a bit misleading as to what I meant. I just meant a look that looks good aesthetically to me. I don't use social media to that point where I would care. The only thing I care about is having a loadout that looks great and cool to me.
    1 point
  27. My Youtube channel is actually called "Allotment Adventure" which is about my allotment (which I dont have the time for anymore). I have been watching through your beginner airsoft series, it is really informative. The only thing I have noticed is the videos are slightly out of order, the fourth video in the series is introduced as your sixth episode in the series. Not trying to be pedantic but was a little confused and I thought I missed out videos when it was going in order.
    1 point
  28. Good evening all I'm new to the forum just thought I say a quick hello to everyone..... please bear with me with the posting malaky as I'm pretty new to forums to..... Daz
    1 point
  29. Good to know i thought this place was going to be full of youngsters
    1 point
  30. Still in your prime! 🔫😎👍 💷GAMBLE💷
    1 point
  31. I have the ESS ones. I also sweat like a glassblowers arse. One cold days, after I've been running about and then stop still for a bit I get a bit of fogging in the top of the bridge area but it clears pretty quickly once you start moving again. The only issue I have with mine is that the foam gasket on the inside that goes up against your face disintegrated and relacing it is nigh on impossible. Another one to consider is the Revision Desert Locust Fan Goggles https://www.tactical-kit.co.uk/revision-desert-locust-fan-goggle-essential-kit-15381-p.asp
    1 point
  32. Welcome mate 🖐 All the info you need is in the forum 👍 You just have to find it 🧐 Unfortunately the choice is lower than it should be because stock is very low everywhere.
    1 point
  33. MTP is great this time of the year though, site depending. And it's... reasonable on some sites year round, especially if the foliage is lighter coloured. Webbing rigs and camo aren't made to look cool, it's made to be efficient in combat, and it looks cool because of what soldiers do with it. I am a believer in 'form follows function' i.e. make a practical, well made, efficient kit and it will look good.
    1 point
  34. Well, it didn't take long, but mines had a paint job now.
    1 point
  35. Unless you're really just using an airsoft site as a filming location, like Licking Mustard does. I wish folk like that would find a different venue or hobby, but they do exist. And I do have to point out that the most practical costume for a typical short skirmish game of pretend soldiers is joggers and a couple of hi-caps in your pockets. Rentals are the only ones doing it right.
    1 point
  36. Get the C-25! You're getting more bang for buck than any G&G you'll ever come across and, let's be fair, it's much better to have a polymer body than a pot metal one!
    1 point
  37. It is, the Specna is very similar to the ZCI hop and works well. I'm amazed that anyone is still making geared hops at this point. That said, every time I have a go with Ex-Workmate Eddy's basic G&G CM16, I'm reminded just how good it is, even totally stock and completely neglected. I guess G&G keep making them that way because they work just fine.
    1 point
  38. The C25 is available without the PDW stock. https://mpa-airsoft.com/product/specna-arms-sa-c12-black/
    1 point
  39. As you say above, you can get lots of likes but putting together a smart loadout and still be comfortable and not hate your life as soon you stop standing in the safe zone and step on to the actual field, 100% doable. I just wouldn't recommend any emulating of guys who are doing full on balls-out cosplay for photoshoots if you do actually want something that's good looking but is also genuinely practical. I also do disagree with your sentiment that practicality and efficiency are mutually exclusive to be honest. The main thing I'd say is, if you put on a PC and helmet then a ghillie jacket with hood, you'll have covered up 80% of the PC and helmet anyway and you'll sweat your tittays off, not to mention being slow, uncomfortable and getting snagged by both foliage and structures - ergo you won't actually look cool. Oh and the helmet will potentially snag inside the ghillie hood too and restrict your head. Personally I own one of these but I'd only wear it with a chest rig, if I go for PC and helmet it'll probably be for indoors and hence no fake trees on me. Just some experience I've gained having spent a fuck ton of money on gear over the past 15 years, as I always say how you wanna spend your cash is up to you.
    1 point
  40. And I believe the combat machines still use a geared hop up, compared to the specna's rotary hop up, which is just a better design. Its a small thing, but if you want to do something simple like change a hop rubber, you will be thankful for the rotary hop unit.
    1 point
  41. Agreed, I don't see much reason to pay C25 prices. They're both polymer, I'm unclear if the C25 is significantly better. The only actual feature difference is the X-ASR mosfet, but that does nothing except trigger contact protection, and mine balks at aftermarket motors. Both are fine for length, anything more than that is just willy-waggling for airsoft use. And don't worry about the quoted FPS figures, those will be using Specna's stock M90 spring. Fine for CQB, just about enough for woodland. Drop in an M100 through the quick-change system and you're good to go. The G&G, hmm. It's a lot more than I'd want to pay for one, given how feature-poor it is. The sight may be functional, or a gimmick. That said, G&Gs do tend to shoot very nicely, and that's what actually matters, not the feature list. You probably won't regret it.
    1 point
  42. Jez_Armstrong

    Gun picture thread

    A G3k I've recently been working on
    1 point
  43. HuttArmouries

    Gun picture thread

    E&l 104 I believe. Finally found a scope setup I like for it and overall got it comfortable for me. Ive been wanting to fully modernise one of my aks for a while and I'm happy with the result. Also the cmore makes for a good poor mans kobra >->
    1 point
  44. Then why not the sa-c08? https://www.patrolbase.co.uk/specna-arms-sa-c08-core-tm-carbine-aeg?pv=17821 It has everything you'll need from a first gun.
    1 point
  45. Hi @TheNotoriousLoki 👋 Welcome to the forum, full of advice and like minded players! 🔫🤪👍 Good luck getting started, almost similar story! 🤞👍 Thanks @Shamal for the mention! 🔫😎👍 💷GAMBLE💷
    1 point
  46. Welcome and hope you enjoy your first game. Do lots of reading in the forum to get as much info as possible before making purchases. It'll save you money in the long run and should make the experience even better.
    1 point
  47. Hi and welcome to the airsoft asylum 🤪 I'm sure you will all have a blast at the courts in Bristol. Have you all got the essentials? Good quality eyepro and boots with ankle support and gloves( for the cold and protection from bb hits)cause it hurts like a mofo when pinkies get hit lol. Is it a cqb site? Cause full face pro is recommended. Any way enjoy yourselves and listen up in the briefing and above all call your hits!👍 You have plenty of time to check out @GAMBLEon this forum. He has a tube channel which you could benefit from taking a look at. Hints and tips and gear advice in abundance Regards
    1 point
  48. the "gas" in a gbb magazine is a mix of liquid and gas. when you fire the pressure drops, liquid portion starts boiling and the pressure raises back up, this is also why they tend to not like colder temperatures as the equilibrium pressure, and the rate of boiling will decrease. same reason why they don't like being fired quickly (where you're venting gas pressure faster than the boiling can top up) it's not perfect, but it approximately keeps the pressure the same (close enough for our purposes) as long as there's liquid left in the magazine. if your familiar with cheap gas lighters it's exactly the same principle (and you can even see the liquid portion decrease over time in the transparent ones). for hpa, this isn't the case, it's 100% gas, so to acheive a usable working volume it has to be compressed to much higher pressures then regulated down to the pressure you want to use. it's not really practical to build all this into a small enough package to fit inside a magazine hence using an external tank+regulator. there are systems out there, notably the daytonagun kits, that operate like a gbb only with the air feed going through the gun rather than the magazine so you run it with a standard hpa setup. afaik the WE p90 can also be made to work like that due to the way they worked around the top mounted magazine.
    1 point
  49. Ajax

    What have you made?

    I was trying to buy smallest possible torch with integrated grip to use on pistols. I found one made by UTG but nowhere to buy anythere outside US. So I decided to make my own. The hardest part was to find smallest possible torch with instant on light and highest possible lumens. The one I got is a size of AA battery and has real output of 650 lumens. Not bad for such tiny EDC torch. Next step was easy with bit of help from thingiverse and my limited cad skills I manage to produce this it's tiny c.8x6cm!! tested on the game day and was better than expected perfect pistol torch with grip
    1 point
×
×
  • Create New...