Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 14/05/19 in all areas

  1. Rogerborg
    Are you joking? Look at that custom paint job. You can't put a price on that.
    4 points
  2. MandalShArK
    My good lady paid for a minty 2009 dated DPCU softshell for me.
    2 points
  3. Crazy_Crystal
    I'm currently running an FMA H-nape repro with a team Wendy epic liner which together are very comfortable and really hold the helmet on securely (FMA maritime) you will probably end up having to make the liner and whatever strap you use work together. it's a pain in the backside but means that the helmet is comfortable for days. literally. I personally didn't get on well with the original FMA wormdial as it had a tendency to put quite a bit of pressure on the back and side of my head before loosening it's self and ending up resting on eyepro which caused all kinds of fogging issues 😂
    2 points
  4. AK47frizzle
    I don't normally like to post things like these but... https://www.prefired.com/ads/double-eagle-g36-aeg/ WHAT. THE. FUCK.
    2 points
  5. Cody Smart

    SR25 DMR

    E21A reacted to Cody Smart for an advert

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    A&K SR25k - £220 Modular M4 stock - £20 Suppressor - £20 Magpul forgrip - £10 Magpul QD Sling Mount - £10 4 extra mid caps (5 in total) - £40 7.62 mag plus - £15 Maple leaf super feed springs - £28 Internals: Edgi 509mm Dual Bore Barrel - £115 Maple leaf 50 degree bucking - £10 Maple leaf nub - £8 Pro win hop unit - £25 CA SR25 QD Gearbox - £35 SHS SR25 O-ring nozzle £5 Ultimate V2 Cylinder head - £14 SHS silent piston head - £12 Army force SR25 aluminium piston - £18 SHS M130 Spring - £10 ZCI SR25 reinforced Gear Set - £18 Element 28tpa Motor - £30 Titan Advanced V2 mosfet- £130 Mods: - AOE Correcion - Pre cocking - Mosfet Locked to semi - Air seal mods 430fps on a .2. Preferred weight is .36’s or .4s Total cost: £793 Looking for £600 or best offer Vortex Short Dot (scope) is not included.

    £600

    Walthamstow, London - GB

    1 point
  6. wire2k

    Gun picture thread

    StayOnTarget reacted to wire2k for a topic

    My first RIF G&G GC16 Predator. Skirmished a few times and so far very happy with it. Plan to add a mock suppressor once I figure out what will fit with the rail and maybe a snake skin paint job in the far future.
    1 point
  7. RobHedley

    THE TM MWS thread

    LVOA-D reacted to RobHedley for a topic

    Having looked at the VLTOR gas blocks and being shocked at the price of them. I decided give a cheaper option a go first. Ordered this low profile gas block to replace the front sight version and so far I am impressed. Made of machined aluminium and should look sweet once it’s on. Best thing is it only cost £8 from Patrol Base!! 👍
    1 point
  8. LVOA-D

    THE TM MWS thread

    Lozart reacted to LVOA-D for a topic

    @Lozart I have seen that yes, shame I don't really need all the stuff that comes with it, at most I'd use the upper and lower, not really digging the rest I must say. Plus I'd be stuck with almost a complete set of Strike Industries stuff I don't have a use for. Also the price, I can get 2 MWS' for that money 🤣.
    1 point
  9. Steveocee
    Lost a mag this weekend so of course you have to order 2 as replacements 😇
    1 point
  10. Lasbrisas17
    The best strap you could get is probably a team Wendy cam fit system which will run you well over £100. You can also get H-nape or x-nape (honestly repros of these are fine but repro occ dials are shit). FMA does an 'upgraded strap system' which is essentially a worm dial, haven't tried it but that might be an option. Since you don't have much stuff of real weight on your helmet a H-nape and better padding should do.
    1 point
  11. RobHedley

    THE TM MWS thread

    Immortal reacted to RobHedley for a topic

    I wish I hadn't asked now..... that image will always stick with me!! I am going to go home and cuddle my MWS tonight!. Gentlemen, a minutes silence for @LVOA-Ds upper please. I hope you get an upper sorted soon. I will keep an eye out as well.
    1 point
  12. hunter511
    For those not aware checking this link occasionally can be worthwhile; https://online.edgarbrothers.com/collections/deals For example they had ArcTeryx Talos Wolf Grey trousers at under a hundred quid brand new last week. I don't even run a CTSFO loadout but was tempted.
    1 point
  13. L3wisD

    The "Share A Bargain" Thread

    tasum reacted to L3wisD for a topic

    Bullseye have got TWO Viper fast mag holders for £3.49! (And they're in stock!) https://www.bullseyecountrysport.co.uk/viper-airsoft-poly-speed-m-series-magazine-pouch-x-2-molle-softair-6mm-bbs-29962-p.asp I've got the black versions of these, and while it's Viper, they're really good. Never had a problem with mags coming out and they look really cool too - as proven by my profile picture! It's free shipping too! You could get four delivered to your door for the cost price of one Fabric/Velcro pouch! I'd buy some of these if I wasn't already stocked up.
    1 point
  14. L3wisD
    For what it's worth Jay, I thought your advert was fine. Well written and descriptive with good photos. Thought the price was fair for what you got too... Leagues above the normal advert we're used to seeing on here, keep them like that and you'll be fine
    1 point
  15. Rogerborg
    I have JayHawk ahead on points, you're going to have to go for a knockout.
    1 point
  16. ProPain87

    Gun picture thread

    Fordy0401 reacted to ProPain87 for a topic

    My Ares striker, originally an as01 but looks more like the 02 now 😂
    1 point
  17. SgtTalbert

    Gun picture thread

    Careless reacted to SgtTalbert for a topic

    1 point
  18. clumpyedge
    https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F153487518323 buy it now price is ridiculous, even for discontinued mags
    0 points
  19. LVOA-D

    THE TM MWS thread

    Shizbazki reacted to LVOA-D for a topic

    @RobHedley I rather you don't ask...🤣 still makes me feel bad. But in all seriousness, I think my bev block wasn't inserted correctly when I torqued down the barrel nut. Perhaps in combination with a weaker than average upper?? I am not entirely sure but I am sure I did not put too much stress on it. I had another MWS before this and I actually torqued the barrel nut down without a bev block and there was no problem. Sucks but as long as I can manage to get a new upper...shit happens.
    0 points
  20. Stratton Oakmont

    Gun picture thread

    Tony.S reacted to Stratton Oakmont for a topic

    Could be If you can work it out from the clue below you should worry because that means your mind works like mine hosea 8:7
    0 points
×
×
  • Create New...