Leaderboard
Popular Content
Showing content with the highest reputation on 20/02/19 in all areas
-
The 'What have you just bought' Thread
GothicGhost and 3 others reacted to Crazy_Crystal for a topic
4 points -
4 points
-
Load-Out / Loadout Picture topic
StayOnTarget and 2 others reacted to Hellfish for a topic
3 points -
Load-Out / Loadout Picture topic
B.S and 2 others reacted to MikeMarden for a topic
Hey! - Someone posts a picture of their bare ass on here & it's the Forest Unicorn that gets the piss taken?! 🙂3 points -
He’s a forest Unicorn ! 🦄3 points
-
The Autobot bucking has a concave shape to it and an elongated contact patch; The former helps centre the BB for consistency, the latter helps apply more backspin and give more range. I have found them to be inconsistent and are easily damaged. I think the diamond contact patch hurts accuracy as the BB will tend to run slightly off centre / take an inconsistent path and exit. Then also the Omega Nub is a good product, the concave design is desirable, but it is soft and malleable giving another variable. In the case of your setup @marine you have a concave nub on a concave bucking, not ideal. The SixG Super Nub is very hard being brass, this gives consistent hop application and concave shape to a conventional bucking (TM / Modify) A conventional bucking has a much more uniform contact patch across the width of the barrel, so the BB is centred better (due to the concave nub) and it exits the contact patch more consistently because the contact patch is essentially a straight line across the barrels width. All of these points are also true of an Rhop contact patch, the only difference being the length of the contact patch is vastly longer than a conventional bucking. All of these points are why Rhop is so effective and consistent. What I'm saying is, I think you'll get much better results with a SixG Nub and bucking2 points
-
Do I win the internet today?! https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F163554709612 !!! Edit - damn, I see this has been spotted already. Wtf.2 points
-
HIGH SPEED LOW DRAG Not my ass*2 points
-
Macks airsoft dreamers of the week thread
Aengus reacted to clumpyedge for a topic
https://airsoft-forums.uk/profile/18987-seth_k/1 point -
Silverback SRS Thread
sonofsammo reacted to Prisce for a topic
Your right, you really do want an SRS!1 point -
Load-Out / Loadout Picture topic
SgtTalbert reacted to MikeMarden for a topic
Hey buddy - Yes the dual tube FLIR, green as opposed to QS in this case 🙂1 point -
Hey Wo1f thanks for u request. I did another test an hour ago . 18ºC with Zasdar Green gas. 330FPS with 0.20bbs 1J 289FPS with 0.28bbs 1.08J 288FPS with 0.30bbs 1.15J The limit in my country is 350FPS /1.14J. I have to test what distance I get with 0.30bbs but.... You think that maple leaf autobot with laylax omega nub is good performance ? . I´ve seen a lot in this fourm about MODIFY TAN rubber and SiXGbrass nub.1 point
-
Load-Out / Loadout Picture topic
comrade vinnie reacted to StayOnTarget for a topic
Congratulations you just made me spit my cup of tea all over the laptop,that ass is begging to be full autoed with .3s That comrade is a very nice loadout 👍1 point -
Macks airsoft dreamers of the week thread
clumpyedge reacted to Georgeturner2001 for a topic
Very odd. Needs a tag on the Plate Bag like the 2.0 has.1 point -
Increase the B.B. weight and you should see more range1 point
-
Watches
Enid_Puceflange reacted to RMDavis for a topic
It's lovely mate. One day I aspire to own a 'Hulk' but a Tudor Pelagos might be a little more realistic!1 point -
1 point
-
Watches
RMDavis reacted to clumpyedge for a topic
1 point -
Watches
RMDavis reacted to Enid_Puceflange for a topic
A guy I know has a couple of nice wrist tickers 😉👍1 point -
Load-Out / Loadout Picture topic
MikeMarden reacted to SgtTalbert for a topic
Just ordered the black version myself, glad you like it. Also, is that the FLIR dual tube? if so, did you go Green or QS?1 point -
THE TM MWS thread
ThatNordicGuy reacted to Davegolf for a topic
Hi Bernt! Welcome to MWS ownership!! All MWS have nigh on identical internal workings Stock circa 300 FPS on 134a / upto 330 on Green SixG Super Nub is great drop in range and accuracy upgrade Longer barrel will increase FPS, but not increase accuracy Floating valve alterations are needed to reliably and efficiently increase FPS Dont get too hung up on FPS, these MWS guns punch well above their weight! I dont see the need for more than 400 FPS on 0.2g, once you go higher youre increasing wear and efficency / consistency will suffer As for GBB pistols, if you want performance to match the MWS then it has to be Hi Capa1 point -
Macks airsoft dreamers of the week thread
clumpyedge reacted to Georgeturner2001 for a topic
It’s a crye 1.0, only way of telling these are legit are the little size tags; which this one has. @clumpyedge the crye JPC 2.0 has the little crye black label on the left side, not the 1.0.1 point -
Load-Out / Loadout Picture topic
StayOnTarget reacted to Druid799 for a topic
What can I say ? Most of us look like asses on here , but your the only Unicorn ! 🦄 👍1 point -
Load-Out / Loadout Picture topic
Northman reacted to DarkAssassin for a topic
1 point -
Load-Out / Loadout Picture topic
Jaylordofwaargh reacted to comrade vinnie for a topic
1 point -
Watches
clumpyedge reacted to Tackle for a topic
i was looking for a marathon for about two years, i was ready to give up........then someone told they'd changed the name to Snickers......i was one happy chubby bunny. I'm here all week😝1 point -
The 'What have you just bought' Thread
Eddie The Headshot reacted to B.S for a topic
Just rather unexpectedly got an Army Armament R85A2 a couple of weeks ago... Despite being not as top notch as the more expensive replicas I'm rather impressed with it really and it's by far the cheapest way of getting an L85 with a rail. And so long as I look after it I'm sure it'll be fine... famous last words. My dad's got an ICS L85, or SA80 as he'd call it, and you can feel the difference in build quality between the two, but if you're not fussed about little things like some lack of bevelling on a few more intricate parts, and most glaringly some rather cheap plastic on the dust cover and bolt release (I'm sure you could probably replace these relatively easily and I may do so myself, the grip and butt are nice materials mind) then it's really a good deal, considering this was about £170 on sale from BBGuns4Less.co.uk (Sometimes a bit of a gamble with them but this payed off) and the ICS is about 300 and a bit pounds typically. Not to mention, although a tad temperamental, this comes with an optional Electric Blow Back system, which I'm a fan of. It makes me grin! It can just be turned off by locking back the bolt though, if you're running low on battery or just particularly boring. (P.S - Almost forgot, it does have an L85A1 bolt pull, which can also be easily replaced and I may also do so at a later date.) You'll certainly see the box coming! I did have some issue with getting this thing delivered, but that was only because of a note in the order asking for the Non-two tone version which was listed as out of stock even though it hadn't been the day before my order; but as it turns out they were just waiting for a new shipment in. Not that they told us that to begin with of course. After a bit of a rebuild to fix the slightly wobbly front rail - and tighten quite a few other bits as it seems all they did in the factory is put the screws in, turn them twice, and leave it, it felt a lot more solid. Bit of a nightmare to get the upper and lower receiver back together, but I've heard that's the case with all L85s, and I imagine perhaps even the real one. Put the ACOG off my CM18 on in place of the carry handle and iron sights, which I was surprised fit on the 19mm rail but then again the scope's off Amazon so perhaps it's not exactly 20mm. Looks bloody smexy though! As I'd heard in reviews the feeding and magazines seem to be the biggest functional downfall of the Army Armament R85, and in direct comparison to the ICS the mag-well is indeed visually smaller. Although once you get the hang of it, it doesn't hamper you too much. I found it doesn't like hi-caps though, which is fine by me because I don't either, but my dad's ICS hi-caps which we tried for setting the hop caused the well documented issue of the gun jamming in repetition fire, needing to be changed to and fired in auto before it would fire again. While I can't say for sure, it seemed switching to my new Nuprol Mid/Real cap mags (which I love by the way) solved this as I had no feeding issues using them, but I didn't exactly fire off a billion rounds to test this so it might have just been pot luck. Still, as a collection piece this thing feels great, looks the part, and should, hopefully, fingers crossed, work in a game... If not though I'll have the trusty G&G CM18 to back me up. Although I wasn't there to open them (or get a better picture of them), given I've just gone back to uni after getting the L85 on a break, my new lovely hand made wooden rifle rack and pistol stand arrived at home the other day... can't wait to go back and get my ever expanding collection on them! Even if my wallet is rapidly deflating... Why do I want all the things? And finally, I got a little patch alongside the L85, that of the famous 7th Armoured Division 'Desert Rats', which is also the name my old War Thunder & Arma squadron operated under. Now, to spend even more money on attachments!... *Wallet cries* P.S - Blimey that turned into a full review, that wasn't supposed to happen!0 points -
Load-Out / Loadout Picture topic
clumpyedge reacted to jcheeseright for a topic
😮 £4k for Gen2. 😂😂😂😂😂😂😂😂0 points