The 'What have you just bought' Thread

[sp00n]

For my tm akm 

BBF hop arm

DyTac/Arron Smith AK Master mount repro

Repro PK-A (I struggled to find one these days, ak optics are a bit limited imho)

 

for my tm mk18

BJTAC G style steel trigger

[JimFromHorsham]

Full hand cannon / taser looking upgrade for the Maxim9 in the form of the tracer unit & baffle extensions , ChinaRMR & fakey +2 mag extension .

 

 

 

[Tactical Pith Helmet]

17 minutes ago, JimFromHorsham said:

Full hand cannon / taser looking upgrade for the Maxim9 in the form of the tracer unit & baffle extensions , ChinaRMR & fakey +2 mag extension .

 

 

 

You have to shout 'I am the law!' each time that you draw it.  

[JimFromHorsham]

16 minutes ago, Tactical Pith Helmet said:

You have to shout 'I am the law!' each time that you draw it.  

more like “I’m a middle aged bore who got that joke far too quickly” 

 

not from the films either 😂

[MrTea]

On 20/01/2023 at 21:39, Khyber said:

Good stuff. I will take the plunge with them I reckon. I did see on a review that they take some wearing in. And also new ones the timer is a little premature but settles to stated time after a little use. Good thing is as they are timed you dont need to lob them, a good low through or almost roll is sufficient for room clearing. Where did you buy them from? I noticed on the official website they are 85 I think but of you buy 2 they are a little over 60 each.

 

Fifewargames - they're out of stock on the official site and just about everywhere else when I was looking.

 

Edit: As of 1450 today Fifewargames are also out of stock.

 

Edit2: As of 24/1/23 they're back in stock, black only.

Edited January 24, 2023 by MrTea

[Skara]

While I wait for my new rig to arrive:

 

- G&G ARP-9 handguard for the AAP (pics will follow);

- Specna polymer upper receiver;

- Random 128x32mm suppressor, building a lighter, more modern upper for my 933 specifically for tournaments (pics will follow)

[jonesy17]

I've just bought a few keymod to picatinny rails, and some lipo alarms. Nothing too exciting. But I've just found a relatively local indoor CQB site that runs regularly weekday evening games that I hope will give me the chance to go more often, and so I felt like I needed to invest in a flashlight attachment. Which meant I needed to bite the bullet on the rails, as my keymod setup makes it a little restrictive when looking at attachments. 

[RostokMcSpoons]

Oopsies!  Bit of an impulse purchase...
Umarex HK416 A5 GBBR.

It's my first gas rifle.  Let's see if I can get by with 30 rounds instead of 300 in a mag ;]

I've chucked the sight and grip on there... looks like the sight could come off the riser mount tbh.   And I might change for a longer, or angled grip.  
But I think it does look rather smart, always had a soft spot for the looks of the 416

Edited January 25, 2023 by RostokMcSpoons

[apexpredator]

Been a while since I last posted here due to work/Covid/kids etc.

 

just recently getting back into it, and have came back with a bang! Added a SAI Blu (again) an EMG Combat Master and a KWA Mod 1 in December…..then TM released the NGRS SD6 and well I kinda had to pre-order that too! ETA is mid-feb, fingers cross it all goes smoothly!

[mp5a4]

Picked up a Multicam JPC 1.0 and some Lindnerhof pouch replicas off the forum, working towards a 2014 KSK kit; first time i've been pretty happy with my PC setup  

 

[RostokMcSpoons]

Two new guns in separate purchases on the same page in this thread?
Don't mind if I do, sir!

I think I'm really getting the hang of this airsoft lark    ("Buy more guns.  Don't even need to shoot them, just keep buying...")
 

 

It's the G&G GEC36 from Action Hobbies boneyard, so a decent price.  Two mid cap mags.

Blimey this gun is built solidly!  It's about the same weight as my HK416.  Really nice polymer (plus metal in the right places).  Not the faintest hint of a creak from it, even the folding stock doesn't budge a millimetre.

I think I could beat a stegosaurus to the death with it!    Which is handy, as it's still Tamiya wired so I've not fired it yet.   No dino-hunting for me, until the soldering iron can be found...

 

 

Edit: Deans fitted (took me longer to find the soldering iron than anything else), the guns a peach.   340fps on 0.20s, very nice 18rps on an 11.1v
I'll have to fit a MOSFET on it to protect the trigger contacts as this another gun I don't want to open the gearbox of, in case I spoil it somehow.

Edited February 3, 2023 by RostokMcSpoons
New pic, Battlefield 4 loadout: Coyote sight + Stubby grip

[JustMark]

Not as exciting as a new pew (or two! @RostokMcSpoons) but inspired by discussion elsewhere here I got fancy new gloves

 

[Shamal]

1 hour ago, JustMark said:

Not as exciting as a new pew (or two! @RostokMcSpoons) but inspired by discussion elsewhere here I got fancy new gloves

 

Where from,how much and are they available in black or mcam?

Haha so many questions,so little time. 😉

 

Regards 

[JustMark]

1 hour ago, Shamal said:

Where from,how much and are they available in black or mcam?

Haha so many questions,so little time. 😉

 

Regards 

I'm afraid I made old Jeff a bit richer by using Amazon.  I think I was spoiled for choice due to my child sized hands, less oddly tiny appendaged folks might struggle. 

Gotta get and play with all this gear I keep buying now! 😄

[Khyber]

15 hours ago, Shamal said:

Where from,how much and are they available in black or mcam?

Haha so many questions,so little time. 😉

 

Regards 

I got mine in black from amazon a year ago. In Medium size. IIRC multicam is also available.

[C-Diddy]

20 hours ago, Shamal said:

Where from,how much and are they available in black or mcam?

Haha so many questions,so little time. 😉

 

Regards 

Loads of patterns available. I have black, OD and tan, and got my lad some in woodland. Love them.

[Enid_Puceflange]

Snuck this in the back door this morning, early like 🤣

 

[alxndrhll]

A big old pile of bits that have gradually been accumulating ready for a fresh MWS project. RIF itself should be here tomorrow, then just waiting on some bits from HK to arrive before cracking into the build.

 

 

External

5x Marui MWS mags

6x FDE Magpuls (tabs chopped)

PTS Unity Riser

Holy Warrior EXPS-3

BCM Gunfighter Stock

BCM Gunfighter Mod 3 Grip

BCM Gunfighter Vert Grip (M-lok)

Ferro Concepts Pic 45 degree QD Mount

Magpul Trigger Guard

Magpul B.A.D Lever

Genuine Surefire Scout on an Arisaka Mount (will likely swap for an Inline) & repro Mod button

WADSN NGAL

Acetech AT2000R to go in an AA CGS Helion QD Ti replica

PTS Radian Charging Handle

 

Internal

BavTac Titanium ZET plate

SixG Super Nub

SixG HSB

NPAS

Modify Tan (not entirely sure if this will actually go in or not, mixed experience so far)

 

 

Edited February 5, 2023 by alxndrhll

[SBoardley]

54 minutes ago, alxndrhll said:

A big old pile of bits that have gradually been accumulating ready for a fresh MWS project. RIF itself should be here tomorrow, then just waiting on some bits from HK to arrive before cracking into the build.

 

Huhh! I would at least had the impatience to put those magpuls on….

[Davegolf]

This little gem arrived on Friday, for the PDW build ☺️

 

 

[C-Diddy]

3 hours ago, alxndrhll said:

A big old pile of bits that have gradually been accumulating ready for a fresh MWS project. 

 

 

Looking forward to seeing this one 

[GothicGhost]

Fo my son birthday I got some extra mags for his TM hicapa so he can now run a pistol only build.

He will get HPA setup soon as well.

 

The P90 pouch is to store a gas can as it's the perfect size, I have use one for years.

The holster goin back as it's retention is so crap.

[RostokMcSpoons]

39 minutes ago, GothicGhost said:

Fo my son birthday I got some extra mags for his TM hicapa so he can now run a pistol only build.

He will get HPA setup soon as well.

 

The P90 pouch is to store a gas can as it's the perfect size, I have use one for years.

The holster goin back as it's retention is so crap.

 

P90 pouch as a gas can holder?  I like that, I like that a lot!  Just made an order from Patrolbase, I'll see if they've got one I can add in.   (Edit: out of stock, damnit)
It'll save me buying mini-cans I can fit in my existing pouches

Edit:  Is the pouch this double P90 one?
https://www.amazon.co.uk/Viper-P90-Mag-Pouch-V-Cam/dp/B00WX21DFO/ref=sr_1_1
That seems to have an internal divider - do you just cut it out, or will the can fit regardless?

Edited February 5, 2023 by RostokMcSpoons

[Davegolf]

Barrel arrived after nearly 2 months of the most stupid airsoft retailer service I’ve experienced, to top it off the barrel was delivered IN A BAG, seriously what is wrong with people! luckily it’s straight but it has a dent in the end, thanks Airsoft Direct, won’t be buying there again.

 

[Impulse]

MP9 is now complete, but now I need to find some foam that will fit in this because it's a very thicc boi. Anyone know a good way to fill this with foam?