Steveocee Posted March 12, 2020 Posted March 12, 2020 19 hours ago, Skara said: WE g17 mag Maple Leaf 50° Decepticon rubber Maple leaf I-Key. All going into a TM G17. Brilliant, will easily hop .32's!
AlphaBear Posted March 12, 2020 Posted March 12, 2020 4 hours ago, Lasbrisas17 said: Yes, taken at night with cloud cover in my back garden, no lights or IR. Blimey! That's actually pretty impressive....
DerDer Posted March 12, 2020 Posted March 12, 2020 On 10/03/2020 at 19:34, Steveocee said: Just placed an order with X-Fire for a new PDI barrel. Good times. Their custom length service is very handy. Ideal for some of the awkward models.
EvilMonkee Posted March 12, 2020 Posted March 12, 2020 22 hours ago, Skara said: WE g17 mag Maple Leaf 50° Decepticon rubber Maple leaf I-Key. All going into a TM G17. Where did you get the I Key?
Skara Posted March 12, 2020 Posted March 12, 2020 39 minutes ago, EvilMonkee said: Where did you get the I Key? Emperion they also have MR hops in stock. next order I'll buy a couple to try out along with macarons, tensioners, a holster and a source hydration kit.
Skara Posted March 12, 2020 Posted March 12, 2020 3 minutes ago, EvilMonkee said: Emperion? Never heard of them Italian retailer. http://emperionstore.com/ djben9 and EvilMonkee 2
Asomodai Posted March 12, 2020 Posted March 12, 2020 This quite possibly could be one of the best/worst purchases I have ever made. Musing with my tech the other day about the upgrading possibilities of the Umarex MTar X95 Plastic Polycarb gearbox LPAEG. Figured I might give it a go if the price is right. Figure the RC Motor can be replaced with a neo RC motor. Barrel can definitely be changed for a longer tightbore to bring up the 230 FPS up to 250-260. Sort out the compression and might even top 270 without changing the spring. Hop unit is on on/off only dealy, so will be looking at a setting to lift .25's or .28's. Managed to find one on a German site for only 42 Euros, 10 euros postage. A 5 euro discount for orders over 50 euros so grabbed an Element piston head whilst I was at it. Here are some internal photos of another one... FreeFrag.UK and GeorgePlaysAirsoft 2
Supporters Adolf Hamster Posted March 12, 2020 Supporters Posted March 12, 2020 gut it and put more standard internals in it? or if it's at least a standard size cylinder you could probably get an hpa to drop in. Asomodai 1
Asomodai Posted March 12, 2020 Posted March 12, 2020 12 minutes ago, Adolf Hamster said: gut it and put more standard internals in it? or if it's at least a standard size cylinder you could probably get an hpa to drop in. Unlikely, a V6 gearbox might be possible, but will likely protrude out of the back. Many people online have asked if its possible, no one has confirmed or denied. However some people claim to have HPA'd it, though if I were to spend that sort of money I would need to sort out the Hop unit to be adjustable rather then On/Off. This is mostly for CQB or a lightweight (Only 1.2kg) sniper sidearm throwaround. As long as this hits out to 35 metres i'll be happy!
Zarrin Posted March 12, 2020 Posted March 12, 2020 43 minutes ago, Asomodai said: Unlikely, a V6 gearbox might be possible, but will likely protrude out of the back. Many people online have asked if its possible, no one has confirmed or denied. However some people claim to have HPA'd it, though if I were to spend that sort of money I would need to sort out the Hop unit to be adjustable rather then On/Off. This is mostly for CQB or a lightweight (Only 1.2kg) sniper sidearm throwaround. As long as this hits out to 35 metres i'll be happy! I would probably try and reinforce parts of the gearbox with a strong apoxy resin.. mind their doesn't seem to be all that much tolerance/space upfront where cracks are more likely to occur, (at least from the above photo) however even a thin layer in certain key locations could help.
Supporters Adolf Hamster Posted March 12, 2020 Supporters Posted March 12, 2020 Hmm, hard to judge just from pics but a v6 might well fit. Hop could be tricky, maybe tdc mod it?
Albiscuit Posted March 12, 2020 Posted March 12, 2020 I am more stressed at how messy that guys room is!! L3wisD and Tackle 1 1
Asomodai Posted March 12, 2020 Posted March 12, 2020 1 hour ago, Adolf Hamster said: Hmm, hard to judge just from pics but a v6 might well fit. Hop could be tricky, maybe tdc mod it? 15 minutes ago, Albiscuit said: I am more stressed at how messy that guys room is!! I have actually spoken to the same guy. He made it run on a 11.1v lipo and is still running 2 years on. In the end that, a Hop rubber change, barrel change and modification to the hop unit itself is all he did. There will be a build thread on this at somepoint I am sure!
Albiscuit Posted March 12, 2020 Posted March 12, 2020 Has he cleaned his room though? Adolf Hamster and L3wisD 2
Supporters Adolf Hamster Posted March 12, 2020 Supporters Posted March 12, 2020 44 minutes ago, Albiscuit said: Has he cleaned his room though? mans out here asking the important questions
AngryDad223 Posted March 12, 2020 Posted March 12, 2020 On 09/03/2020 at 18:29, CrackCommandoUnit1972 said: New gen 3 hop chamber for my Cyma M24. Looks nicely made and took less than a week to arrive at my door. Where did you get this from? Thanks
Mostly Retired Moderators L3wisD Posted March 12, 2020 Mostly Retired Moderators Posted March 12, 2020 Specna Arms SA-S03 in Olive green ? RMDavis, Danie1, CrackCommandoUnit1972 and 1 other 2 2
Moderators Tackle Posted March 12, 2020 Moderators Posted March 12, 2020 21 minutes ago, L3wisD said: Specna Arms SA-S03 in Olive green ? I heard on the grapevine you've got a bit of a love affair going on with all things specna ? Does the missus know about the other "woman" in your life ? ?
CrackCommandoUnit1972 Posted March 12, 2020 Posted March 12, 2020 1 hour ago, AngryDad223 said: Where did you get this from? Thanks Airsoft Pro from the Czech Republic. It's the first time I have ordered from them so I am rather impressed. Just got to fit the thing and put a few bb's through it at the weekend.
Mostly Retired Moderators L3wisD Posted March 12, 2020 Mostly Retired Moderators Posted March 12, 2020 3 hours ago, Tackle said: 3 hours ago, L3wisD said: Specna Arms SA-S03 in Olive green ? Read more I heard on the grapevine you've got a bit of a love affair going on with all things specna I'm actually on the Specna Brand Ambassador team now ? Me and Angelo Di Vito look after the UK, and there's loads of us over Europe now. If you need any info or sneak snippets of news about anything Specna, just let me know ? Tackle 1
ghostwalker Posted March 13, 2020 Posted March 13, 2020 Dtd holster for my mk23 and belt clip to attach it with. Hoping it will just squeeze onto the belt of my Alice webbing. But if not sure I can McGuyver a way around it
Weeman Posted March 13, 2020 Posted March 13, 2020 My new Tectonic Quake BFG and cylinder for Well MB12 DarkAssassin and GeorgePlaysAirsoft 1 1
ghostwalker Posted March 15, 2020 Posted March 15, 2020 TNT barrel and bucking combo for my mk23. now I just need to decide whether to leave the mk23 black or paint it up in some sort of woodland look
AlphaBear Posted March 16, 2020 Posted March 16, 2020 (edited) All this arrived today. The plan was to buy two spanners and an air nozzle. Ended up buying more stuff than I was planning to upgrade. However, in my defence I managed to stop buying new gears and shims though lol. Edited June 12, 2021 by AlphaBear Weeman and Philby21 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now