Gun picture thread

[PopRocket123]

It is indeed

[emilianoksa]

Which version do you think looks best?

 

Original TM grip with sliver trigger and black magwell

 

Cow Cow Sculptor grip with black Edge trigger and rubber grip tape

 

Guarder tactical grip with Guarder silver trigger

 

 

 

Edited March 27, 2022 by emilianoksa

[frontsight]

33 minutes ago, emilianoksa said:

Which version do you think looks best?

I think the Cow Cow grip with the trigger undercut and flat trigger matches with the "tactical" look of the slide. All three options look pretty cool though

 

 

Flat triggers look good on tactical 1911's as well!

Edited March 27, 2022 by frontsight

[Wavey_Gravey]

I wish somebody would make a decent Staccato…cough Marui pull your finger out cough.

[frontsight]

15 minutes ago, Wavey_Gravey said:

I wish somebody would make a decent Staccato

http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=634_223&products_id=33856

 

if you have £1k to spare, and can handle proprietary designs that don't have cross compatibility with other aftermarket parts, Nova does make an RMR p-DPO.

 

I want a cool 2011 too but not brave enough to pull that trigger...

 

Otherwise the marui DOR hi capa seems to be the closest lookalike option. Just squint a little when you look at it and you can make any gun look like something you want 😂

[Wavey_Gravey]

That would be a big fat pass from me!

[Hellfish]

Basic bitch AA R28 with Surefire XC1 clone. There are many like it, but this one is mine ...... if anyone can advise where to get decent aftermarket fibre optic sights I'd be grateful.

 

Edited March 28, 2022 by Hellfish

[MagpieTactical]

My Cyma Cm041b with deleted tri lug.  Still want a retractable stock and considering the real steel Magpul handguard

 

 

 

[frontsight]

 

7 hours ago, Hellfish said:

Basic bitch AA R28 with Surefire XC1 clone.

Man that's a mean looking setup!

 

7 hours ago, Hellfish said:

where to get decent aftermarket fibre optic sights

 

Can I interest you in a Hackathorn-style setup with blacked out rear and fiber front sights?

 

I personally really like the JLP front sights. Because it's so open you can see below the sight picture is even brighter than the 2mm enclosed DP one. Feels as bright as a reddot in daylight.

 

They make a fully open (booster) and semi-enclosed (accelerator) version for the 1911, should fit the army 1911's as well. Rainbow8 has them for ~£16 (~20 with shipping)

 

Only con with JLP is it is a bit blocky with the sharp edges that can catch on holsters and such.. I think it adds a menacing look though

 

 

Patrolbase seems to have army front fiber's as well, but not sure the quality on these are; they look decent though so check them out

-> https://www.patrolbase.co.uk/army-armament-1911-fiber-optic-front-sight

 

[Druid799]

On 27/03/2022 at 19:21, frontsight said:

I think the Cow Cow grip with the trigger undercut and flat trigger matches with the "tactical" look of the slide. All three options look pretty cool though

 

 

Flat triggers look good on tactical 1911's as well!

 

Have to say those flat triggers look fecking abysmal ! 🤢🤢🤮

[frontsight]

1 hour ago, Druid799 said:

Have to say those flat triggers look fecking abysmal ! 🤢🤢🤮

haha if you'd asked me a while back I would've agreed! I thought they looked like someone stuck one of those small hotel soap bars in the triggerguard.

 

I think continuing to look at them a lot made them grow on me.

Or it could be that the disgust/trauma from seeing it made me grow affectionate of them; kinda like Stockholm syndrome😂

 

It seems to be a recent tacticool fad but they do present some practical value as it provides a consistent trigger "press" even if the finger isn't perfectly centered on the trigger

 

More pics to flip you as well

Edited March 28, 2022 by frontsight

[mightyjebus]

The perfect storm.......

[Jam_Man]

Looking to get back to Airsoft so gave a couple of mine a facelift ready for it.

 

Colour is a bit off in the pics, colour is more green than brown

 

Edited March 29, 2022 by Jam_Man

[Skullchewer]

Alright you primitive screwheads, listen up.
See this?

Edited March 29, 2022 by Skullchewer

[frontsight]

3 hours ago, Skullchewer said:

Edited 2 hours ago by Skullchewer

 

I might copy your style and write on holsters for a flannel daddy loadout. What kind of white paint is that?

 

Edited March 29, 2022 by frontsight

[Shamal]

1 minute ago, frontsight said:

 

I might copy your style and write on holsters for a flannel daddy loadout. What kind of white paint is that?

It's his white lipstick from when he does the rocky horror show 🤭

[Druid799]

On 28/03/2022 at 21:18, frontsight said:

haha if you'd asked me a while back I would've agreed! I thought they looked like someone stuck one of those small hotel soap bars in the triggerguard.

 

I think continuing to look at them a lot made them grow on me.

Or it could be that the disgust/trauma from seeing it made me grow affectionate of them; kinda like Stockholm syndrome😂

 

It seems to be a recent tacticool fad but they do present some practical value as it provides a consistent trigger "press" even if the finger isn't perfectly centered on the trigger

 

More pics to flip you as well

Just realised what they reminded me of , the tacky as fook lighter pistols they sell in Benidorm and other such ‘high end’ tourist destinations ! 🤣

[Tactical Pith Helmet]

4 hours ago, Skullchewer said:

Alright you primitive screwheads, listen up.
See this?

I attached a lanyard to mine by drilling a hole through that nub at the base of the pistol grip.  Putting it on the trigger guard fouled the trigger. 

[Skullchewer]

10 hours ago, frontsight said:

 

I might copy your style and write on holsters for a flannel daddy loadout. What kind of white paint is that?

 

Posca pen.

 

[SeniorSpaz87]

She wasn’t cheap, but I’ve been looking for an excuse to join the MTW club for awhile now and shiny things always draw my eye. #157/250. All externals are real Magpul and took very little modification to fit. Still need a few external parts to arrive tomorrow to finish the build, but she’s looking and preforming excellently. 
 

[Alimcd]

Time for something a bit different? Kj Works KC02 in a Samson B-TM stock with custom turned tapered barrel, VSR hop and Rogueworx internals.

 

 

 

How’s about a cheeky bit of Bullpup action too? GHK G5 in a SRU kit with a real Eotech 552 as the cherry on the top. I’ve got a HPA kit that lets me run AEG mags in it, but I’m way too lazy to fit it so I’ll be running a HPA drum mag on saturday

Edited March 31, 2022 by Alimcd

[Druid799]

Have been working on the pulse rifle , had some extra base plates 3D’ed for the spare mags , made a better sling for it , fitted sling mounts , got a PEQ for it(thanks to the awesome @Stratton Oakmont) and did a wee bit of ‘weathering’ as well , had wanted to send it to @GearTechto have a pukka job done but monies just too tight at the mo so had a bash me self ! 

[C-Diddy]

6 minutes ago, Druid799 said:

Have been working on the pulse rifle , had some extra base plates 3D’ed for the spare mags , made a better sling for it , fitted sling mounts , got a PEQ for it(thanks to the awesome @Stratton Oakmont) and did a wee bit of ‘weathering’ as well , had wanted to send it to @GearTechto have a pukka job done but monies just too tight at the mo so had a bash me self ! 

[Skullchewer]

12 hours ago, Druid799 said:

Have been working on the pulse rifle , had some extra base plates 3D’ed for the spare mags , made a better sling for it , fitted sling mounts , got a PEQ for it(thanks to the awesome @Stratton Oakmont) and did a wee bit of ‘weathering’ as well , had wanted to send it to @GearTechto have a pukka job done but monies just too tight at the mo so had a bash me self ! 

 I will get one soon, to go with my gameday shirt

[CrackCommandoUnit1972]

Tomorrow's arsenal