Mels

Good choice, mate 👍

Not cheap but they do exist, just be sure that the ones you choose have an adequate rating. https://www.safetyspecs.co.uk/

maybe an idea? If not I'm close to you and don't mind having a look.

These are what I use, https://www.amazon.co.uk/Mechanix-Wear-M-Pact-Covert-Gloves/dp/B00SNLIIXE/ref=sxts_rp_s_1_0?content-id=amzn1.sym.2132928c-85bc-4373-9689-b31e59e5ad5f%3Aamzn1.sym.2132928c-85bc-4373-9689-b31e59e5ad5f&crid=1HDRKM5KV6UPW&cv_ct_cx=mechanix&keywords=mechanix&pd_rd_i=B00SNLIIXE&pd_rd_r=c5acf064-85be-43b2-abc1-e9d793bd946d&pd_rd_w=gN201&pd_rd_wg=dUEYp&pf_rd_p=2132928c-85bc-4373-9689-b31e59e5ad5f&pf_rd_r=TCYN0K1HR18VJD4RPM14&psc=1&qid=1663502780&sprefix=mechanix%2Caps%2C97&sr=1-1-9d35b2fb-722c-404c-ae6e-16ef63349c57

Same with mine, even with a metal kit it will finish a mag.

Stew you are a hero! Followed your troubleshooting ended up reinstalling the bbu and now its working a treat! Thank you again. 👍

Hi all, My TM 1911a1 used to drop mags when firing occasionally. However I've just put a metal kit on it and the problem is much worse. I'm using the original springs but it seems the extra weight of the slide moving forward is enough to dislodge the mag, I've tried a guarder mag release but the mags don't lock in at all when using it. Any ideas guys? Thanks

I'll use Geoffs whenever I can, if not I've had no issues with g&g.

I have fitted the G&P handguard to mine and have found the same issue with the pin. However if I use the pin from my old TM mp5k it goes straight through.

TM M16A1 springer, still shoots well enough 20 plus years later!

Finally in the club 😂 In regards to the tight magazines, I've noticed the one it came with seems to need a bit more encouragement to fit but the others are fine.

I agree with the above, I've used guarder frames on a G17 and a G18 both with aluminum slides and mainly green gas, even with the full auto of the G18 and thousands of rounds through both i've never had an issue.

Just another tacticool Krink.

New pews together.