Leaderboard

Cheers @EDcase that's good advice. Yeah I've heard wonderful things about stag-do Airsoft.... Not. I want to take it seriously enough to play by the rules and do it properly, but not so seriously that it isn't fun - a middle ground!

Old is Gold... Current status of the MWS based KAC MRE railed Delta rifle. Picked up a clone SF M600B as a place holder until I can get something suitably vintage, and bought an extremely cheap and very plasticity PEQ-2 battery box! (It was very shiny and just awful) 😂 Managed to make it look somewhat decent with some Khaki Krylon and again weathered using some thinners. Would like to replace it with a G&P PEQ-2 but they are extremely hard to find! Regardless I think it looks the part and I'm loving how this thing has turned out. With the Eotech zero'd in its performing very well indeed. I would certainly consider building another retro rifle maybe something with a carry handle and plastic furniture. Who knows!? A full weekend of airsoft at the end of the month at @ucapairsoft Green Ops and I can't bloody wait, its been too long! 👍

Thought I would try the Hammerite faux soviet 50s era onward AK metal finish that been doing the rounds on social media on my E&L AKS-74. Also a side by shot of Hammerite finish ( that the one that has bakelite mag) and the standard E&L blued finish on an AKM.

I’ve been working on this project for a few weeks, where I’ve started to gather info on airsoft sites from all over the UK. I have built a database of these and created a website where you can browse and find information about these sites, all in one convenient place. PlayAirsoft UK People who want to have a website for their airsoft locations/clubs are not generally well versed in information architecture and they don’t typically have a budget to spend on professional services to make their websites or even basic information well designed and accessible. I'm hoping to take this burden off their shoulders and give them solid tools join in on the action without much fuss. I was annoyed that there was no central place with more info about nearby sites so I could pick one for my next weekend. PlayAirsoft is an answer to this and other issues. The functionality is currently limited because I only just started, but the info is solid; I’ve spent hours scavenging and verifying all the information about the sites you'll see there. There aren’t a lot locations as of right now, but I'm hoping that with your help, we can have a universal place to find more sites. If you have a favourite airsoft location that isn’t listed or know a site owner, use the link below to suggest a new site to be listed. All submissions are reviewed beforehand, as I would like to have the most accurate info on these places as possible. https://airtable.com/shrpMw7Xx1UiVErke Feel free to use this topic as a way to provide feedback, suggestions, and report issues. I’m hoping that PlayAirsoft will provide you with a reliable and accessible way to plan your next airsoft adventure. Enjoy and let me know what you think!

Hi! Keen to get started, when all this mess blows over. From the Exeter area, early thirties and always been interested but never had the balls to give it a go! I don't have guns yet but I have an idea of what I'd like, unsure if it's better to buy some two-tone ones or rent them onsite until I get registered (Done a little research) so curious for your opinions! Hope to meet you all soon!

I’ve a few JG guns and I’ve always been of the opinion there punching well above there weight for the price(I’ve even still got a JG AUG that I bought from ROSV well before all the UKARA shenanigans started and that’s still running ok !) I did have the JG recoil SA58 and that had a very satisfactorily clunk when fired , yes was a bit slower rate of fire with the ‘recoil’ on than not but still fired fast enough to hit the other player , do you ‘really need’ a gazillion rps ?

@RMDavis The patina turned out great but I’d like to see some last ingredient to create a bit of contrast. Why not try some numbers with a marker or a bit of tape somewhere?

First gameplay video of the year. Hopefully the last potato quality video as well so like D:REAM prophecised, things can only get better.

I think most of us started on our own. It may seem intimidating at first but just go with the flow and see what everyone else is doing. Have a chat with others on your bench and you'll get lots of info. There aren't many organised teams so during the games most will run off in their own directions. Just follow along with any bunch you like until you get a feel for the layout of the game zone. As far as AFUK meetups: I meet a couple of people who are on here but I met them at airsoft events first. We're so spread around the country that we can't do large meetups. Hopefully not. They're some of the worst players

Well yeah.find a club give them a call to book a spot and reserve some rental kit and turn up,sign in,take some id,pref photo and take it from there. Dress sensibly(try to completely cover up). The organisers will take you through the procedures and how to use the kit. You will soon start talking to others there. Listen to instructions and start playing. Just follow what your team are doing and thats about it.👍 Yes I think forum members do occasionally organise games. Someone on here will tell you more. Let us know how you get on.🤞🙂 Regards

@RMDavis Old Skool Kool

Hi and welcome to the airsoft asylum. You don't have to be mad to be a member but it helps.🤪 As @EDcasesays get.yourself along to a club,use their kit and when you have done your 3 games get a nice shiny rif of your choice. I've no doubt you will meet some nice people at your chosen site who will help and guide you on the airsoft path👍 Check out @GAMBLE for info and helpful advice. Find him on the tube👀 Have fun🙂 Regards

Cheers EDcase I appreciate that, I came to that same conclusion by reading other posts so I'm glad to get a bit of confirmation on it. Hoping to join in on a game in Devon/South West, hopefully with you fine people (So I don't have to just turn up to a random stag-do..!)

Welcome. If you read some of the many posts relating to buying two-tone you'll see that its always advised to rent for the first three games to get UKARA registered. If you get two-tone you will regret it after three games because you'll want a black one and the two-tones are harder to sell so you'll lose quite a bit of money. Plus you may change your mind about what you want. Give it a go renting first...

Cronoarms are releasing a Bolter kit for an M4 and I'm in the process of designing a system that would allow me to design a fully custom bolter around pretty standard AEG components. That's pretty awesome. Could probably be done with some work. A friend over in the state built something that followed that aesthetic

I wanted that rifle. Ended up getting a Kart EBR as a freebie to use as a base before trying the weight and giving up. Wouldn't mind a G11. Impractical as hell but so cool. I would like to see a Bolter or Bolt Pistol. Armorer Works said they'd look at it if they got permission. I had written a letter to GW asking them to consider it, but don't know if I'd have any luck.

Amazing isn't it? When we get the chance to go around UPS, it all suddenly clicks into place. Bit it's not UPSs fault. It's Covid, Brexit, customs, TaiwanGun etc...

I may have jinxed this, but my Angry Gun variable nozzle seems to work fine once it was set up properly.. How long the nozzle valve stays in one piece and doesn't get ejected out the front barrel is another story

Update: If only UPS were as responsive as UK boarder force. I sent the details as requested to them via email this morning and within 4 minutes I got a reply confirming my UKARA was OK and they would release the parcel. What a relief

Always fancied me one of the Carbine rifles from the Resistance game series. It's basically an M14 EBR with a wooden stock so not impossible to make if you really wanted to.

I think we can all agree that Angry Gun QC is very hit and miss! My clone Surefire suppressor from them is fantastic and I haven't had any issues with it, and works perfectly with my Acetech Lighter-S tracer unit. The Milspec Buffer Tube also fitted without issue and definitely took the slop out of my Car-15 Stock. However their Maritime Bolt Catch is utter garbage! I initially fitted it to my URGI-1 build as it's part of the Geissele package. But with the bcg in the rearward position as soon as you press the mag release to put in a fresh one, it touches the bolt catch on the other side and throws the bcg forward... 😂 I had to use a dremmel and remove material from the underside so it no longer made contact... Mate of mine just bought the l119a2 ambi mag release from them for his mws and it flat out doesn't work whatsoever, there's not enough material to hold the mag in place. I mean look at their latest release, the A2 Outer barrels... Who releases a product, that is not fit for purpose and then announces that with a post on Facebook and tells everyone how much material they need to remove with a file!? To make their shitty product fit! 😳

Fire support has restocked mws guns and magazines 😁

Only face to face. They are good people.

Ah right okay I only checked the website, thanks for the info I'll give them a bell

I can't recall a specific issue with the barrels but I and others have had endless issues with gas nozzles / NPAS, buffer tubes, rails and rail nuts, supressors/flash hiders, charging handles, bolt catches and mag releases.....

Pretty much all Angry Gun parts only succeed at making people angry about their guns 🤐

binary, so it's "semi" only for cqb. i'm just taking the speedsofter stereotype to the extremes

and a binary trigger, most likely a titan. even if it's a gas gun running on hpa with no actual gearbox they'll find a way.......

Then paint it Pink & Hello Kitty Cnut it

and cut the barrel down to 2"

Taking inspiration from RMDavis's URGI build I bought a TM MWS M4A1 as a base for my own URGI build (was gonna get a CQBR but couldn't find one in stock). I have a Z-PARTS MARUI Mk16 DD GOV 10.3'' Steel Outer Barrel (MARUI-M4-030), a Z-PARTS MARUI M4 URG-I Airborne Charging Handle (MARUI-M4-028) and a HAO MK16 M-Lok 9.3" handguard which I bought from from J.K.ARMY (as HAO isn't shipping to the UK right now), but they sent me the wrong barrel nut, so I'm gonna send that back. I've decided to buy a Zparts MK16 handguard instead, and possibly get a HAO one directly from HAO at a later date if the Zparts one isn't very good. I was gonna buy the Z-PARTS MARUI Mk16 9.3" Handguard-DDC (MARUI-M4-012), but Zparts said that I needed the Z-PARTS MARUI Mk16 9.3" Handguard-DDC (FOR ZPARTS) (MARUI-M4-017). I guess it's because I'm using the Zparts outer barrel, which is different to the stock M4A1 outer barrel. I'm fairly new to all this, so I wasn't sure if the Z-PARTS MARUI Mk16 9.3" Handguard-DDC (FOR ZPARTS) (MARUI-M4-017) would fit on a TM M4A1 upper receiver, or if it was just designed to fit on a Zparts MARUI M4 MWS Forged Receiver Set. So I asked them if they could confirm that the handguard would fit on a TM MWS M4A1 upper receiver. I got two emails back from them, and in the first one they said that the handguard can theoretically fit on the TM M4A1, but they don't have an M4A1 to test. And in the second email they said that their MARUI M4 MWS Forged Receiver Set is the same spec as "TM MWS M4", they also went onto say "So the rail and barrel can fit on as well. But we’re not sure is M4A1 same spec as M4. Please ask airsoft shop for further info.". I don't know what they mean by "M4". Perhaps they're referring to the TM MWS CQBR? This really confused me, as I thought the receivers and internals of the TM MWS M4A1, CQBR, MK18 and the M4A1 Carbine are all the same and that the only differences between them are the handguards, barrels, stocks, and iron sights. I decided to order that handguard today as that particular model seems quite hard to get hold of. I'm just worried though that I may have completely screwed up and bought the wrong gun for a URGI build and that the handguard that I just ordered won't fit on my TM M4A1. Hopefully someone can put my mind at rest. Are all the receivers and internals the same on the various models of the TM MWS? Do you think that the parts that I've bought will fit straight on my TM M4A1?

The PSG1 finally arrived, Bloody hell its heavy haha

Finally sorted out my A&K LR300 Good deal from Titano Store for £165 but needed some tlc to get it working well. (Was shooting 260fps way right and some of the screws were completely wrong type) M100 spring, Maple leaf macaron, reshim including motor height set on half shell, bearing guide and now shoots 320 dead straight 👍

Mine is finally complete too! Still might change the grip back to black like real URGI rifles I have seen..

【CUSTOM GBB WORKSHOP】 COLT M4 CQBR SMG 9 mm WE base deep marking, deep 0.3 mm detail fix

【CUSTOM GBB WORKSHOP】 Beretta M1934 Italian air force WWII FS 0623 base deep marking, deep 0.3mm custom grip remove paint Handmade black dye detail fix

My mate - its too cold today for gas guns....its 5 degrees.. My MWS - hold my beer....

Troy M7A1 PDW mostly complete. G&P Troy PDW stock Madbull Troy TRX 7” rail 5KU 7” outer barrel Laylax Nineball 162.5mm inner barrel 6.03 Everything else stock apart from the biro mod. Will lift a .45 Bb to 70m Just got to get a red dot and different flash hider, and keep my eyes peeled for a Dytac 7.5” silver barrel