Leaderboard

From The UKARA Police Facebook page 😂

Waiting on ebay to call me back on this 😡 Update: just had a call from the us, all documented & their going after the slimy cnut..........allegedly 😀

Well, well, well

Thanks that has done the trick, relieved it was such an easy fix.

What do a Gemma Collins's knickers and a BMW have in common? Both often contain a massive cunt

Not long on the auction now! If I was scammed on it I would take it back to him,set it on fire and push it up his arse and say "hows that for a fuckin' rimfire"!! Regards

They're not interested because the minute they say they'll do it their inbox will be jammed full of airsofters asking if the sight they bought from ebay is genuine or not. They could of course do what Leupold do which is keep a database of legit serial numbers and let you enter the SN of yours online to check if it's fake or not.

I've reported the listing too. Hopefully eBay will pull their finger out and review the listing before the auction end. At least with PayPal there is some recourse for the buyer. I just hope the buyer is savvy enough to work out that what they've bought isn't legit. ☹️

If anybody is wondering about what bucking/nub combinations are good for the MWS, I have experience with four so far - the stock bucking, the Modify Tan + SixG brass nub, the Maple Leaf MR Hop (60 or 70 degree) + Maple Leaf Omega Tensioner/Modify flat nub, and the T-N.T. TR Hop bucking for GBB (60 degree) + Modify flat nub. Stock Bucking + nub: +Accurate to roughly 40 meters, 50 meters on a good non-windy day and if the target's torso is fully exposed +Doesn't seem to get dirty too quickly, easy to clean +/-Decently durable, but you're limited to under 120 MPS/400 FPS -Can lift up to 0.30's only - nub is too weak -Feels smooth, not as grippy as Maple Leaf buckings Modify Tan + SixG: +Very accurate out to 60 meters or so on 1.3 J, 0.30 - 0.36 G BB's (capable of lifting heavier BBs, up to 0.40, decent accuracy out to 70 meters - not sure about 0.45 or 0.48) +Drop in fit, no need to modify nub - the SixG nub is a good pairing with most buckings on the market +Works very well in cold weather -Not very durable -BBs often curve to either side at the end of travel, some lateral deviation observed -Limited to under 120 MPS/400 FPS, I would not go above 350 FPS in all honesty Maple Leaf MR Hop + Maple Leaf Omega Tensioner: +INSANE range, approx. 70-80 meters accurately with 0.40g and heavier BBs @approx. 2.0 J and above +Very grippy bucking, decently durable, makes a great seal with the nozzle +Consistent FPS +Lateral deviation is noticeably less than Modify Tan/SixG combo -Omega Tensioner needs to be cut at the front and needs to be perfectly aligned or else your gun will shoot way off -MR Hop bucking gets dirty quickly due to how grippy it is and is a pain to get squeaky clean (you'll need to strip and clean your bucking/barrel after every game day) -Very strange issue - has no trouble lazing BBs on semi-auto, but BBs will fall out of the barrel on full auto T-N.T. TR Hop 60 degree + Modify Flat Nub OR T-N.T. standard flat nub: +Not as much range as MR Hop but even better consistency due to shape of patch, insanely accurate (it outranged most AEGs and I was able to score several cross-map kills) +Almost 0 lateral deviation +Doesn't get dirty as quickly, very easy to clean -Need to cut off front of nub in order to fit inside hop chamber -Needs teflon tape to seal better and prevent rotation of inner barrel inside hop chamber due to the bucking retaining edge being a bit thin - took more work to get this one right than the other combos In close to medium range testing (placing shots at roughly 30-40 meters onto a large postcard sized target, about 8x10 inches), the Modify tan combination and the T-N.T. bucking are the most accurate, though at under 30 meters the difference is negligible across all the combinations I've tried and the stock bucking is more than adequate for hitting targets at this range. The main issue I faced with the stock nub and bucking was that it could not lift 0.30s very far unless I was shooting over 1.5 J. In addition, after a while of shooting I noticed a lot of horizontal deviation. I could literally see my BBs making sidespins down to their target and it was getting difficult to thread BBs through small openings. However, past 100 feet is where the MR Hop and the T-N.T. buckings really shine. The MR Hop and the TNT buckings are on another level. The consistency of the T-N.T. from 30-60 meters is better than that of the MR Hop. The MR Hop is a little bit more "grippy." The T-N.T. seems to run cleaner. Both can send 0.40-0.45's out to 250 feet easily. The main issue with the Modify Tan bucking is that it's rated only at 50-60 degree and is not as durable as the TNT or Maple Leaf MR hop bucking. It also has more lateral deviation at long range than the MR Hop or the TNT bucking. There are numerous reports of people's Modify Tan buckings ripping from normal use. I don't see that happening anytime soon with my MR Hop bucking or my T-N.T. buckings. Apologies for the long post. This is just my experience and results may vary from setup to setup.

Ah! Good call. Looks like it's a dead simple quick-change:

Going for a cyber punk load out and starting with a tm g17 with maple leaf hop and barrel with sru body kit mp5 swordfish to follow

I actually wasn't able to find the surefire earlier, I assume someone had bought it as it was Buy It Now as opposed to another auction, unfortunately! His account is still active though but at least we saved someone 🤣

Thank feck for that, I'd made up my mind that if the auction went on to the end I was gonna bid £500 in the last ten seconds & then hit him with the most evil feedback before he could cancel my bid lol 😈 Did his account get suspended, as I can't find the sure fire here had for sale (didn't put it on my watch list duh 🤓)

People power. Well done all 👍

Ace, great to hear it wasn't anything serious. That's a pretty smart spring change system too.

It's pretty easy to filter out duplicates on a database.

Scotch indoors sports to re-open from the 31st!

Not all heroes wear khaki. Or maybe you do, I don't know. Either way, thanks for doing this, I wish eBay would make it a bit easier.

I imagine "going after" will be deleting the auction and telling him not to do it again. 264831947299

Erm here’s my new patch! Lol Surely this will scare people when they see me coming right? #stayontarget!

I ordered one of the PVC ones - still got to wait a few weeks for those. The embroidered ones look great though.

Ruger 10/22

I sent mine at about 7, so he has most definitely seen it then. Seems like he is trying to get something for nothing & trying to make it seem like it is real because he used it on a .22... Not the most honourable thing to do!

I have messaged him (a few hours ago, actually) & no response thus far. Also reported the listing with Rocketdogbert, so hopefully ebay take notice. He is also selling what he describes as a "genuine Surefire" in another listing for £45, which I am doubting

Reported it too, but it's still up, I've a mind to message the seller to let him know he's been rumbled, he might have an attack of conscience & pull it, otherwise some poor mugs getting ripped off. Edit: just posted in zin in case the potential buyers on there, & pmd the seller, I feckin hate to see some poor sap get turned over 😠

Most 249 boxes are very easy to remove the spring. Take it out and see if the motor will spin , then replace the spring. hopefully the piston will move to a different position and things will be back to normal.

Why? The wires are hot. The cost is in time, to see if it's locked up under compression, and if so release the ARL.

Disability quotas

Fair bit of photography and practising image editing the past couple of days while I'm home on leave. Edit - I really shat out with this system of the board making supporter posts slightly grey instead of white lol

Well, he's been on & nothing ?, Any mods heard from him. Checking his profile, I couldn't see any other posts other than his sales threads, not a single thread interaction ?. Great forum member 😏

Listen carefully...

WIP.

It's what I thought right away, which is why I'm not that fussed by this thread. What 15 year old lad wouldn't browse PatrolBase and then come up a wizard wheeze to get his hands on some of that tacticool kit? All that aside, if he's keen to try airsoft, good for him. Let's get him playing at a proper site, then a solution will present itself.

bought this with a few issues. Replaced the bevel gear, replaced the motor with a 25k one and fitted a Titan along with a bearing spring guide. shoots very well now and will get a run out this Sunday. Cosmetically replaced the boot stock and the only stock I had floating around was the green one but doesn't look to bad in my eyes.

^^^^This. Especially when our defence was given on the basis that we'd be self policing. If as a community we're seen to be condoning, or encouraging, people to break the law our defence could easily be removed

Of course we all know it goes on, various loopholes exploited, people manufacturing rifs from ifs etc, & 99.999999% of the time no one gives a shit, but every now & again something happens that highlights it, suicide by cop/chav on a bus etc etc, but there will be that one time when someone with clout takes notice, or even some spindoctor thinks putting the boot in to us will gain votes or deflect attention from a government fuçkup & then we'll all end like speedsofters with nerf guns..........no thank you😟

Mate, all of what you've said I already know, & I get it, we know the vcra is flawed in so many ways, but it's all we've got, lol the alternative could have been Airsoft kit that looks like NERF, or maybe no toys at all 😭 But the elephant in the room is that this is a VERY public forum, Reg is a kid & not only is he asking for ways round the vcra, he's admitting that he's prepared to break the "law" (?) to get what he wants, these conversations have been played out many times before, ultimately we shouldn't be entertaining them, doesn't help when he's already had one or more (?) threads discussing what kit to get, gas or aeg etc, which implies to us that he's older & legit to buy, when in fact that's not the case. Personally I get a bit pissed off with it, the fact that it's in the open has the potential to put everything at risk for the rest of us, only a couple of moody incidents to put Airsoft in the front page & then this crap gets scrutinized, & then God knows what ? Personally I've got too much time & money, like many here, invested in playing & I want to keep doing it. The info that Reg seeks is out there, replicated numerous times, he could look for it without "bumping" the subject up there for every anti "gun" lobby to see. Not digging you out Rog, or anyone one else, just we need to be more careful, I wouldn't even care if members like Reg contacted other experienced members or even mods by PM to clarify what they can or cannot do. "This is my rant, there are many like it but this one is mine" 🤪

Mrs Duck chatting to her friend...

I fell off the chair at this one...

Big oofs, that's awful. I really wish eBay allowed contacting bidders, just for circumstances like this where there's no way to warn them that they're about to get ripped off. I know, "privacy", but since they won't do a damn thing about counterfeits themselves, it's a piss poor way to protect customers. I've never done it before, but I'm half tempted to register a sock account and bid a crazy amount just to try to protect these victims.

Oh jesus 🤕