Cheeky vimto Posted May 6, 2021 Share Posted May 6, 2021 This arrived today along side a donor Cm16. I'm definitely fully hpa converted, bye bye AEGs. GothicGhost and Monkman 1 1 Link to comment Share on other sites More sharing options...
Alimcd Posted May 8, 2021 Share Posted May 8, 2021 Picked up a M140 spring from Pete @ak2m4for a DMR build. On the phone, he was telling me about some new springs he’s got on the way as he was finding a lot of the Chinese-made, steel springs to be garbage-level quality. I thought it was interesting, having never had an issue with springs, and proceeded to have a tinker with one of my high speed builds. After a few games, it started to sound a bit strained and the range had dropped off a cliff. Lo and behold, Chinesium spring had snapped! Very lucky I had that M140 kicking around to replace it with (8 tooth DSG, M140=+-300fps) ak2m4 and Monkman 2 Link to comment Share on other sites More sharing options...
ak2m4 Posted May 8, 2021 Share Posted May 8, 2021 @Alimcd oh no lol ...springs do go through some real abuse. ZCI does seem to be one of the better after-market springs. The new Gearparts springs so far doing well. Japanese military grade steel seems to do the job. Alimcd 1 Link to comment Share on other sites More sharing options...
C-Diddy Posted May 8, 2021 Share Posted May 8, 2021 (edited) Prommy tightbore and purple hop rubber and nub from Eagle 6, plus an Odin from BZ Tactical Edited May 8, 2021 by C-Diddy AlphaBear and Monkman 2 Link to comment Share on other sites More sharing options...
Alimcd Posted May 8, 2021 Share Posted May 8, 2021 1 hour ago, ak2m4 said: @Alimcd oh no lol ...springs do go through some real abuse. ZCI does seem to be one of the better after-market springs. The new Gearparts springs so far doing well. Japanese military grade steel seems to do the job. The Leviathan clocked 44,000 shots with that spring so you’re bang on about the abuse! The new Vltor receiver I picked up from you is beautiful btw. I’ll have to snap some pictures when I get a few minutes! Link to comment Share on other sites More sharing options...
Popular Post AlphaBear Posted May 8, 2021 Popular Post Share Posted May 8, 2021 Aimpoint T1 micro 2 MOA. This thing is tiny! It’s an absolutely awesome bit of kit. NV compatibility on the first 4 settings. Not that I have any NODs but hey you never know Tackle, RMDavis, Monkman and 4 others 2 5 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted May 9, 2021 Supporters Share Posted May 9, 2021 My mate over the pond occasionally edging me with pics of stuff I won't get for months. Wo1f, Druid799, Dentonboy and 1 other 1 3 Link to comment Share on other sites More sharing options...
Dentonboy Posted May 9, 2021 Share Posted May 9, 2021 19 hours ago, AlphaBear said: Aimpoint T1 micro 2 MOA. This thing is tiny! It’s an absolutely awesome bit of kit. NV compatibility on the first 4 settings. Not that I have any NODs but hey you never know Pricey? Link to comment Share on other sites More sharing options...
GothicGhost Posted May 11, 2021 Share Posted May 11, 2021 A few bits for the MWS. Nick G, Wo1f and Monkman 3 Link to comment Share on other sites More sharing options...
Ebeneezer Goode Posted May 11, 2021 Share Posted May 11, 2021 After looking at a few options, decided to order a UAR, having fancied one for a while. Was considering a JG SG550 but went for the bullpup as its compact and something a bit different. Next fortnight will pass rather slowly as I await its arrival... Just as well as my M933 is playing up, inconsistent FPS (all over the place but consistently low) so I've contacted the vendor under warranty to see if it can get sorted. Had to miss some skirmishes recently due to a trapped nerve and now this. Buggeration. Link to comment Share on other sites More sharing options...
Asomodai Posted May 12, 2021 Share Posted May 12, 2021 Lonex version 2 Enhanced gearbox to replace my broken G&P one. 2x ASG Ultra Air. Link to comment Share on other sites More sharing options...
Skara Posted May 12, 2021 Share Posted May 12, 2021 Got my 7" "motorcycle sleeve" from Aliexpress. It's a fucking brick, the barrel nut must be lead lined uranium or something 😮 Monkman, Tackle and GothicGhost 3 Link to comment Share on other sites More sharing options...
GothicGhost Posted May 12, 2021 Share Posted May 12, 2021 7 hours ago, Skara said: Got my 7" "motorcycle sleeve" from Aliexpress. It's a fucking brick, the barrel nut must be lead lined uranium or something 😮 Nice I was looking on there for aeg rails does that one fit okay? Link to comment Share on other sites More sharing options...
Skara Posted May 12, 2021 Share Posted May 12, 2021 3 minutes ago, GothicGhost said: Nice I was looking on there for aeg rails does that one fit okay? Yup, although it did slightly chew up the plastic thread on my king arms pdw receiver 😕 will get a pic of the thing installed tomorrow, overall for €23 posted I can't complain, the m-lok slots appear to be proper m-lok spec and the inner diametre is the same as my noveske sound hog (fits really snug, which is a plus for me as it locks the barrel in nice and tight). the two small anti rotation tabs fit nice around the upper (the reason why I bought it in the first place) Link to comment Share on other sites More sharing options...
alxndrhll Posted May 13, 2021 Share Posted May 13, 2021 (edited) Some EPMs for the NGRS to fill a void until I can stumble onto some pmags, opened them up as soon as they arrived and did some weathering/shading on the ‘bullet’ inserts because they look awful without it. Managed to find some Gen M2 ranger plates in stock so grabbed those immediately, make EPMs look so much nicer IMO. And to wrap up, a Ferro 45 degree QD mount... just an aesthetic upgrade over the Magpul one I’ve used on and off. Edited May 16, 2021 by alxndrhll Monkman 1 Link to comment Share on other sites More sharing options...
Chev Chelios Posted May 13, 2021 Share Posted May 13, 2021 Got a Reptilia RMR mount for the bendy boi but not really liking it. Will prob end up with one of them Arisaka 45" T1/T2 mounts. Really loving the performance since swapping to Co2 although the guy down at the pub supply thinks I am doing something nefarious with all the Co2 am buying Druid799, Monkman and TheFull9 2 1 Link to comment Share on other sites More sharing options...
Johnyboy1976 Posted May 13, 2021 Share Posted May 13, 2021 https://www.davescustomairsoft.co.uk/Weapon-Accessories/Magnified-Rifle-Scopes/1.5-6-adjustable-dr-elcan-gen-3-with-soft-case-black Monkman 1 Link to comment Share on other sites More sharing options...
Guest Mr. No_Face Posted May 13, 2021 Share Posted May 13, 2021 Santa Muerte, lady of Holy death patch. Also blew £425 on something very special that should be coming next week. Link to comment Share on other sites More sharing options...
Johnyboy1976 Posted May 14, 2021 Share Posted May 14, 2021 https://www.davescustomairsoft.co.uk/Weapon-Accessories/Magnified-Rifle-Scopes/1-16x40-scope-with-high-20mm-mounts.html https://www.davescustomairsoft.co.uk/Weapon-Accessories/Lasers-Torches-and-PEQ-Boxes/Element-PEQ-15 Now i need some decently priced mags for the 417/G28 and the PSG1 Link to comment Share on other sites More sharing options...
38super Posted May 14, 2021 Share Posted May 14, 2021 Serial no 10162 Link to comment Share on other sites More sharing options...
Spartan09 Posted May 14, 2021 Share Posted May 14, 2021 Just got these through the post today. Ordered a couple of custom patches from stitchmeup.biz of my logo (after a recommendation from @TheFull9 ) Very good quality, very reasonable pricing and, considering the custom nature of the patches, a quick turnaround time. Cant wait to rock them on my gear at the next game day Monkman and TheFull9 2 Link to comment Share on other sites More sharing options...
Guest Posted May 15, 2021 Share Posted May 15, 2021 A few RS bits for my Vector Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted May 15, 2021 Supporters Share Posted May 15, 2021 8 hours ago, Spartan09 said: Ordered a couple of custom patches from stitchmeup.biz of my logo (after a recommendation from @TheFull9 ) Very good quality, very reasonable pricing and, considering the custom nature of the patches, a quick turnaround time. Did they do just the 2 embroidered ones? Surprised they didn't have a higher minimum tbh that's very rare. Link to comment Share on other sites More sharing options...
AlphaBear Posted May 15, 2021 Share Posted May 15, 2021 New mount for the T1. Think I should have got a real steel version as opposed to a knock off..... damn. Unity actually supply a template so you can see how the mount actually looks on your rif. Clever way of doing it if you are in two minds. Barny and PopRocket123 2 Link to comment Share on other sites More sharing options...
Cannonfodder Posted May 15, 2021 Share Posted May 15, 2021 A new pair of boots. They were labelled as combat high leg, but if they came any higher they'd be combat slag boots Druid799 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now