What have you made?

[PopRocket123]

Nothing has been made yet but I've drawn up my initial sketches of a custom AEG machine pistol. It's going to use my own gearbox design using an ICS upper and a lower made of 3d printed and laser cut parts using standard V2 gears and trigger contacts and a short type motor and motor cage. It's using the same method as @Hangtight with his custom bullpup gearbox but keeping the manual trigger contacts, modified to attach directly to the trigger extension. I want it to use either Glock style AEG mags or Mac 10 AEP mags feeding into a standard M4 hop up and 6" barrel

[Guest]

A tiny thing for lockdown boredom.

 

I got fed up with using an adapter, so I cut a 14mm ccw thread on my KWA Vector. It’s normally 16mm c/w

 

 

[Enid_Puceflange]

Currently making an IPSC style target, fortunately our back garden is big enough to shoot pewpew in and not overlooked by neighbours 👍 

 

 

 

Edited April 9, 2021 by Enid_Puceflange

[Enid_Puceflange]

Just got to make legs or a stand for it and will try it out tomorrow 

the aluminium in the top aiming area is angled to reduce ricochet , and deflect down the back of the target

a successful “hit” rings off a nice little ching 🎵 

 

 

 

Edited April 9, 2021 by Enid_Puceflange

[HuttArmouries]

Two new holsters. Havent bothered making them nice and neat as the only leather I have right now is covered in scars and defects and I cant get more. They do both work perfectly however and are mounted onto plates which allow me to use them with molle. I can also change the angle they sit at quite easily. 

[Lasbrisas17]

Developing an integrated backup iron sight (IBIS) for the zenitco Perst-4 device:

First print (still WIP):

[Ropeyshep]

Just knocked up a new belt, thicker and stiffer than I’d normally make, used three layers of webbing for the main belt, meant there were five layers to attach the adjuster webbing, that’s a workout for the machine. Also added Velcro which is a new one for me, hoping it helps with the rotational stiffness. 

[Skara]

Nice, although you could have gone for a 2 belt system, one inner lined with male velcro and one outer (2 layers) with female.

Just like the FRV one.

 

This way you can still use the outer belt as a standalone (female velcro is the loop one, so it doesn't shred your clothing) and there will be zero rotation as the whole system grips on your trousers belt loops

[Ropeyshep]

Yeah, I know the type. I prefer single belts, the tendency for single layer inner belts to roll and the finicky lining up of the two layers has always  kept me from making them.
 

Also, although I’d never recommend it (I even actively discourage it), the slim possibility of a belt having to be body weight bearing always makes me use the strongest construction possible. 
 

I learn to live with having to thread/rethread fairly regularly. Makes me much more focussed on what goes where and why. That’s also why I use the 38mm buckle, it’s the same height as the 2” webbing so the whole belt works in the same belt loops.  

[Ropeyshep]

Made a little dropper panel so I can move my admin pouch down, makes the front of my chest rig a little cleaner. 2” Velcro at the top, three rows of PALs at the bottom. 

Also a couple of very hi-viz muzzle covers. 

 

[Guest]

I made another rear catch for an FPG, being billet it’s loads stronger than the nasty cast pot metal one

 

 

 

[Adolf Hamster]

Finally got around to putting an actual hop unit in the f2000.

 

Modded an old king arms unit with an stub of inner barrel and it seems to actually work.

 

Of course it being the f2000 it'll go from firing every shot with a 1fps deviation at home to feeding 1 shot in ten about 100fps under on the field.

[Smiling-Dutchman]

Cranking handle on my speedloader changed its mind about being a cranking handle for a speedloader.

 

So I made a new one on the lathe out of some spare brass stock.

 

Annoyingly I did find some pre-made metric screws, but I couldn't find the metric tap and die set. So I made both a new screw as well as the handle using BA thread. Added some superglue on the thread for good measure.

[Albiscuit]

A friend of mine done a thing, not a bad thing but a good thing. This thing was done for me too so it’s a bloody good thing!!

 

We both have Scorpion Evos and the carry case and love the bags for their versatility and pouches on the front so I bought one for my TM MP7.

I was talking about how cool it would be to be able to attach them together so he took both my bags and added straps on the side so I can clip them together to make it easier to carry.

he also added a shoulder strap, a stronger carry handle to be able to carry both as once and even a velcro panel over the scorpion branding.

 

I can’t wait to use them, I have managed to get all of my skirmish gear in both bags to make things so much easier on a game day.

 

excuse the crappy pics

[Guest]

I built another KWA Vector into Krytac Alpine receivers

 

 

[SilentSparky]

My "stuff" was getting everywhere, so I picked up a cheap secondhand bookcase and turned it into a Airsoft storage unit 🙂 

[Enid_Puceflange]

Boredom

Purchased some 2mm Olive green Kydex and started experimenting making grenade clips for my Dynatex’ grenades

Just need to figure out how to molle them to my PC

 

 

 

 

Edited April 9, 2021 by Enid_Puceflange

[Shamal]

On 21/09/2020 at 08:31, SilentSparky said:

My "stuff" was getting everywhere, so I picked up a cheap secondhand bookcase and turned it into a Airsoft storage unit 🙂 

Niiice job! See you have future proofed it with extra two rifle spaces. 👍🙂

Regards 

[TheFull9]

Not my work but I've had a few of these made in different camos over the past couple of years.

 

Have been talking with a couple of different companies, hopefully within a few months they'll actually be available and in just about every camo that you can get gear made in.

 

[Danger_MouseUK]

Here is a ghille suit base I'm currently working on. 

 

I need to add some mag pouches for my M40a3, and possibly a small GP pouch to the top, and I need to put some knee padding the shock cord grid and some braces on the trousers. I can't decided wether or not to put pockets on the back of the thighs on the trousers or not. Then I can start ghillieing it up. 

 

*** WARNING *** Anyone who has an affliction against mixing cameo should not scroll down. I'm not buying A-TACS 500d nylon for the small bits I need, and I already had the Multicam. 

 

[PopRocket123]

This is the first test print of my SCAR stock adapter. As I was expecting the shrinkage from the ABS has caused it to not fit so I need to take some measurements and adjust the scale to compensate. I'm happy with how it's come out though and version 2 will also include some more work on the final look of the part.

[HuttArmouries]

Saw a pic of an mp5k with an mp5 sliding stock a long while ago and really liked the look. This is still a wip but it all fits and works. A lot of grinding and sanding. 

[Guest]

I could post a pic, but it’s just a mag.

 

I converted a GBLS DAS mag from 30 to 100 rounds for a buddy. 
 

 

[Heath]

I've designed and 3D printed a rail for my FNX-45, with the plan to do a low-profile plate adapter if I ever get round to ordering a cheap red dot that includes one. More tweaking to follow to make it more low-profile.

[Heath]

Latest rail version printed in bronze gold. Not a perfect match, but close enough to the lower frame.