Leaderboard

Tears, tantrums, soiled nappies and sick. And that’s just from me. Interesting week so far 😂

Just checking in case any of you miss it or didn't hear...

Yep thats the one, my tech has been running one for over a year now with no issues. Just note that the sizes run small, im 33" waist and there is not much adjustment left in the medium for me. A little over £20

Got access to a garden ?, I'd take them outside & in a controlled environment do all the things your not supposed to do to lipos, get them wet/expose them to sunlight/feed them after midnight, that sorta thing, get them to combust "safely", they'll only do it once.

WTF?!?! Shopping at Halfords ?? Are they made of money ???

Ever wanted to know what will seemingly bring a decent portion of airsofters to their knees? Adverts. Fuck me, for a bunch of fuckers whinging about snowflakes and the like you don't half make a fuss 😂.

if i guess right they are both maruzen special editions at least 15 years old and not very good as skirmish guns. they are collectors pieces and appear to be in very good condition however don't think there is really much of a market for them in the UK maybe £150 each

I took mine to work and blasted them with a pasload first fix nailgun. In a pile of sand of course. After three ranging shots I hit it straight through the middle. All it did was smoke a little bit. Quite an anti climax. ☹. But on a more constructive note.......well sorry I haven't got one...shoot them.lol. My bad.😳 Regards

Crikey I don't want to go on that cruise again. "Welcome aboard but don't touch any thing. We will take you to a whole new dimension of enjoyment." Next I knew I was sparking and going see through and back in me grannies scullery! "Where do I get a feckin' refund?" 😉 Regards

Or did you think you were participating in the 'Philadelphia Experiment'? 😄 So what happened? A good trip I assume... 😁

After being carried out of Kings Cross station yesterday with concussion, I’m starting to think my acceptance letter from Hogwarts was a hoax! 🤔 Regards

A bucket of salt water, it will discharge them to zero over a couple of days. Otherwise connect them up to a lightbulb and discharge them to zero volts. Some chargers have a 'kill' function that will discharge a LiPo to zero. They are inert at that point and can be disposed of safely.

using wider bbs isn't anything revolutionary. 20+ years ago Marushin and a few other manufacturers made stuff in 8mm, they've been around for a while and judging by how many bb manufacturers make 8mm bbs, you can guess how well it went

Finished my version 2 SCAR rail. This version has a monolithic rail to replace the wobbly front sight.

Cool i had wrongly assumed that the less complicated mixture of gasses was more desirable im looking forward to smelling like the fishmongers bin on a sunny day! 😂

I hit a nail through mine 😈 Was an entertaining way to make it safe. Of course you need a good place to do it... Outside in an old baking tray away from anything flammable. (And keep the extinguisher handy 😉)

Clearing stock to cover what he owes on the failed 6.44MM BB experiment?

I've been wearing super cheap eyepro since day 1 and never regretted it, but I do my research on them. You don't have to buy the expensive brands, but do get good ones. If you don't know what makes them good, then buy proven expensive ones.

I wouldnt say its inconsistent. U find a desirable FPS and loctite the NPAS screw, then its nice and sturdy and goes nowhere. AG V2 is a little more inconsistent than G&P NPAS, the best consistency i've seen is on G&P adjustable nozzle stop.

To be blunt it looks fucking horrible and I'll be glad when it's gone

Oh yea p’mouth was a corker ! Played the hospital a few times as well , Andy is a good lad when it comes to running game sites 👍

Nuprol 3.0 coming out of the back of the slide of WE Glock onto my hand whilst spamming the trigger, and this is through a sturdy glove... https://imgur.com/a/Ikf2iZU

While I have no issue with ad's it becomes an issue when it impacts the usability and accessibility of the forum.

quick, everyone act casual:

Umm...that top left one looks....umm....more than a tad under-aged and over-graphic. My 'Nearly-40-Father-of-Four' instincts really don't like it.

Its working fine, u just need to loctite it a bit since its less tight then G&P, but since I will play on higher fps i went with G&P adjustable nozzle (NPAS) set, its has far better quality build so entire AG v2 will be a spare just in case. Tomorrow i will have some time to test whether G&P NPAS nozzle will work with adjustable nozzle stop - so if i dont like how G&P NPAS consistency will be later on i will be able to use it as enchanced nozzle for adjustable nozzle stop after i loctite the shit out of the screw inside

Action Hobbies boneyard section right now if anyone is after cheap skirmish wear...

I'm no stranger to thread derailments but this one has taken a very weird turn and i'm not sure we're in kansas any more....

You can fecking scoff but I did have a guy turn up with a snapped cucumber stuck up his bum , he said and I quote “ he was a naturist who was picking tomatoes in his greenhouse with no clothes on , when he lost his balance fell back and sat on the cucumber” and after a bit of digging and pulling the Doc who removed said cucumber from said rectum thrusts it in to the air like King Arthur drawing Excalibur from the stone and exclaims in a very thick Aussie accent “oy mate how long you been growing your cucumbers it Tesco rappers !” 🤦‍♂️ Shortly after this the bloke and his ‘friend’ scuttled off . As they where passing through the waiting are the Doc sticks his head through the doors and shouts At the top of his Aussie voice “mate ! You left your cucumber behind !” 🤣🤣🤣

And ad agency I used to work for had a Maxim in the boardroom. Legend has it it was used on the Russian front. I spend a lot of my spare time behind the sewing machine, either modifying things to fit my hobbit size frame or updating designs to a more modern/useful cut etc. The plate carrier was built from scratch using 500D PECOC Hybrid pattern fabric. Based on the Viper VX buckle up plate carrier. (The buckles and cummerbund are Viper - using their buckles allows me to add on any Viper mini rig) I've built two of these now, one in this PECOC pattern and one in BATUS/Opfor Blue DPM. I'm working on a third in good old fashioned Queens plaid DPM 1000D fabric. The DNG parka was inspired by Hannleitassa's "Krus cut" parkas on Instagram. Cropped to waist length, added a zipper, removed elastic cuffs and added velcro adjustments. Added "raid mod" pockets to shoulders, added actual pockets where the pocket flaps where. I'm going to start a second one soon that will be a pull over like the 0241 TOP. I'm also having some fabric printed in DNG but an Arid colour wayto build one from scratch. The "Micro fight" clone is copied from a Viper VX mini rig, Again, using Viper buckles so it's cross compatible. From the previews the colour on these looks mental. I'm not sure what colour profile these forums use, but they look completely off to how they should.

You know it's a good quality product when they have to Photoshop it on to a stock photo

Took the new girlfriend home to meet the family. The kids love her and my folks think she is great. The wife's not too impressed though! 🤔 Regards

https://www.airsoft-hub.com/item/7601-fully-upgraded-cm15-kr-apr Not sure ... But am u missing something here ..... Have Airsoft guns gone stupid prices in last few weeks ??

Since people are weirdly invested in my facial hair, here is today's before and after 😂