Gun picture thread

[bladerunner168]

VFC SR25 ECC GBBR

 

 

VFC STF12 Gas

 

[Jacob Wright]

Finally got around to chopping the barrel and fitting the new flash hider. 
 

Definitely a lot more usable in close quarters now!

[HuttArmouries]

On 08/03/2021 at 11:33, Prolish said:

Thought I'd drop the final result of a long ongoing TM Recoil project, that's finally been completed. Clone of Larry Vickers' rifle from the Modelo Prison raid in '89. 

 

More of this kind of jazz over at PenguinDynamix on IG. 

 

 

Been looking at doing a car 15 style build but I was never sure if id be able to find the fixed handle upper for a tm recoil. Which did you use? Im more familiar with the scar rifles so I wasnt sure how parts compatible the m4s are with regular aegs. 

Edited March 15, 2021 by HuttArmouries

[Prolish]

  

On 10/03/2021 at 16:24, Tactical Shed said:

Absolutely awesome!! what upper receiver did you use? 

55 minutes ago, HuttArmouries said:

Been looking at doing a car 15 style build but I was never sure if id be able to find the fixed handle upper for a tm recoil. Which did you use? Im more familiar with the scar rifles so I wasnt sure how parts compatible the m4s are with regular aegs. 

 

The upper was a mashup of a standard TM Recoil and a G&P A1 uppers, mixed into one via magic of LC Eng Outpost, then finished by hand with rattle cans by me, as most cerakote places advised against doing so - the finish would have been too thin and wouldn't cover machining marks, filler etc. 

 

As a fixed carry handle fanatic, I've looked high and low for a NGRS upper before jumping on this journey a while back, as none exist. 

[Tactical Shed]

21 hours ago, Prolish said:

  

 

The upper was a mashup of a standard TM Recoil and a G&P A1 uppers, mixed into one via magic of LC Eng Outpost, then finished by hand with rattle cans by me, as most cerakote places advised against doing so - the finish would have been too thin and wouldn't cover machining marks, filler etc. 

 

As a fixed carry handle fanatic, I've looked high and low for a NGRS upper before jumping on this journey a while back, as none exist. 

Really impressive work thought it must have been custom have been looking for an a1 carry handle with brass deflector upper for ages myself. Gotta love a retro AR great attention to detail given me some inspiration to do a Gary gordan build! 

[Alimcd]

Fresh from Mark at FMJUK, here’s my crack at building a DMR 

 

Semi only, chronos in at 430-435 with 0.2’s. Started life as a two-tone Cyma that needed some tlc. Fresh spring, new hop unit+barrel, changed the motor to a higher torque Infinity and rewired it for standard Gate-style mosfets.
 

Picked up a wooden stock from Airsofttiger. Sanded, stained and finished etc. 

Sanded off seam lines, got some slightly unusual (but real-steel accurate) Winchester trades cut and sent it off for a coat of Cerakote E110 Midnight. 
 

 

Edited March 17, 2021 by Alimcd

[Lozart]

19 minutes ago, Alimcd said:

Fresh from Mark at FMJUK, here’s my crack at building a DMR 

 

Semi only, chronos in at 430-435 with 0.2’s. Started life as a two-tone Cyma that needed some tlc. Fresh spring, new hop unit+barrel, changed the motor to a higher torque Infinity and rewired it for standard Gate-style mosfets.
 

Picked up a wooden stock from Airsofttiger. Sanded, stained and finished etc. 

Sanded off seam lines, got some slightly unusual (but real-steel accurate) Winchester trades cut and sent it off for a coat of Cerakote E110 Midnight. 
 

 

 

Now THAT is nice.

 

[alxndrhll]

22 minutes ago, Alimcd said:

Fresh from Mark at FMJUK, here’s my crack at building a DMR 

 

Semi only, chronos in at 430-435 with 0.2’s. Started life as a two-tone Cyma that needed some tlc. Fresh spring, new hop unit+barrel, changed the motor to a higher torque Infinity and rewired it for standard Gate-style mosfets.
 

Picked up a wooden stock from Airsofttiger. Sanded, stained and finished etc. 

Sanded off seam lines, got some slightly unusual (but real-steel accurate) Winchester trades cut and sent it off for a coat of Cerakote E110 Midnight. 
 

 

 

[Keithlag]

My little collection 

[EDcase]

Duno about labelling them tho 😄

Is that so you remember what you've got and where they go? 😉

Edited March 20, 2021 by EDcase

[Keithlag]

6 hours ago, EDcase said:

Duno about labelling them tho 😄

Is that so you remember what you've got and where they go? 😉

Yep you got it

[EDcase]

I like looking at my wall and thinking... 'Oh, I didn't remember I had one of those' 😄

Old age helps 👍

[Keithlag]

4 hours ago, EDcase said:

I like looking at my wall and thinking... 'Oh, I didn't remember I had one of those' 😄

Old age helps 👍

at the ripe old age 44 I didn't remember what I went to the next room for

Edited March 20, 2021 by Keithlag

[GothicGhost]

Hi-capa carbine kit with new stock.

Nice and compact for travel on a motor bike

Edited March 23, 2021 by GothicGhost

[OldNoob81]

Painted the red bits on my CM16R8L.......

 

Added a fibre optic and x4 scope as well as a fore-grip.

 

Took a while to set the sights in but I suppose 'what do you want for £35?'

[r00k3h]

Well here are my first two rifs. Got a game booked for 10th April, can’t wait to try them out. Also have a ASG mk23 but that’s still with the mail man, hopefully getting delivered tomorrow. 

 

 

[Ebeneezer Goode]

3 hours ago, r00k3h said:

Well here are my first two rifs. Got a game booked for 10th April, can’t wait to try them out. Also have a ASG mk23 but that’s still with the mail man, hopefully getting delivered tomorrow. 

 

 

 

Very nice! The sight goes well with the overall look of the rifle. I actually like it in the 2-tone, it kind of suits it.

 

I'm in the 2-tone club as well, personally I don't care, mine is green which is one of my favourite colours anyway... Just bought a Goetland sight for my M933 off Amazon yesterday which should be arriving tomorrow. Going for the old-school carry handle-mounted look.

 

Wanting a pistol as a backup too, however AEPs are crazily thin on the ground for some reason. Heart set on something trad-styled and compact... 1911 or M9. Did fancy a DE however they're like cannons... can't be bothered with gas - more maint, propellant, cold issues (I'm in the Highlands), most springers out there seem to be disposable cheapos that break within 5 mins of first use. Plus semi-/full auto useful. All just my newbie opinion of course, we all have our preferences...

[heroshark]

[Pydracor]

Looks amazing, is that a custom built GBB?

[Druid799]

WiP but now you know one of the possibilities when you buy a pink Bizon ! 🤣🤣

[Adolf Hamster]

Ok i'm actually starting to hate that abomination unto god a bit less now it kinda looks like something tiny tina from bl2 would use

[Druid799]

1 hour ago, Adolf Hamster said:

Ok i'm actually starting to hate that abomination unto god a bit less now it kinda looks like something tiny tina from bl2 would use

Mite be able to reclaim that status , ordered some pink 25mm webbing this evening to make a tacticool sling for it ! 😁

[heroshark]

11 hours ago, Pydracor said:

Looks amazing, is that a custom built GBB?

Springer by Acro they also do a non-firing shell ejecting version.

[Ebeneezer Goode]

8 hours ago, Druid799 said:

WiP but now you know one of the possibilities when you buy a pink Bizon ! 🤣🤣

 

Well, it's certainly unique... you've got balls 😃

 

MilSimmers everywhere will recoil in sheer horror 🤣

 

[Guest]

9 hours ago, Druid799 said:

WiP but now you know one of the possibilities when you buy a pink Bizon ! 🤣🤣

I love it !