Moderators Popular Post Tackle Posted June 23, 2022 Moderators Popular Post Share Posted June 23, 2022 On 19/06/2022 at 11:22, Enid_Puceflange said: Fitted an M203 to my GHK cos it wasn’t heavy enough already 🤦🏻♂️ Nah that's not heavy, try using a real steel mg42 like a sniper, I think I had to have a nap afterwards 😴 Enid_Puceflange, johnnyj, Pinovic and 4 others 4 3 Link to comment Share on other sites More sharing options...
Popular Post cropzy Posted June 23, 2022 Popular Post Share Posted June 23, 2022 Finally part of the gbbr gang Torch is mounted like that as it wont fit on any of the side rails due to the front end being chonky. Nick G, frontsight, Floperator and 4 others 7 Link to comment Share on other sites More sharing options...
Popular Post JimFromHorsham Posted June 23, 2022 Popular Post Share Posted June 23, 2022 bit of a clone mash up of eras but I like it concretesnail, Jacob Wright, Wavey_Gravey and 8 others 7 4 Link to comment Share on other sites More sharing options...
Popular Post johnnyj Posted June 23, 2022 Popular Post Share Posted June 23, 2022 Seen this super cheap and could not pass it up 😃 Druid799, lokkers, Nick G and 7 others 9 1 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted June 25, 2022 Share Posted June 25, 2022 Back when Smith&Wesson made Glocks until Glock said you can’t do that anymore frontsight, johnnyj and TheFull9 2 1 Link to comment Share on other sites More sharing options...
Popular Post Davegolf Posted June 26, 2022 Popular Post Share Posted June 26, 2022 Took the freshly pimped TM G19 Gen 4 out today, some indoor action at Invicta Black Site. Absolutely love how snappy the Gen 4 is even on lowest power gas, 45M flat trajectory on 0.25s, couldn’t ask for more from such a little gun! GothicGhost, JimFromHorsham, Tactical Pith Helmet and 5 others 7 1 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted June 26, 2022 Share Posted June 26, 2022 10 minutes ago, Davegolf said: Took the freshly pimped TM G19 Gen 4 out today, some indoor action at Invicta Black Site. Absolutely love how snappy the Gen 4 is even on lowest power gas, 45M flat trajectory on 0.25s, couldn’t ask for more from such a little gun! great job on that , very nice build Davegolf 1 Link to comment Share on other sites More sharing options...
Popular Post Sneaky Posted June 26, 2022 Popular Post Share Posted June 26, 2022 I have put serious amount of work into my small, but perfectly formed collection. Love them! Tackle, Pinovic, johnnyj and 4 others 6 1 Link to comment Share on other sites More sharing options...
Guest Posted June 27, 2022 Share Posted June 27, 2022 KWA KRISS Vector modified as follows: Krytac Gen2(2017) upper and lower (Extensively modified internals to fit) RS KRISS stock RS KRISS angled front grip RS KRISS hand stop Clone Magpul MBUS Pro BUIS Angry Gun barrel shroud with tracer Ace1Arms rhs mag release RA-Tech CNC steel buffer RA-Tech inner barrel & hop unit Rhesus CNC gen2 trigger Rhesus CNC Safety & Fire selectors Four colour camo Cerakote by Supreme Coatings Link to comment Share on other sites More sharing options...
emilianoksa Posted June 27, 2022 Share Posted June 27, 2022 On 25/06/2022 at 14:17, JimFromHorsham said: Back when Smith&Wesson made Glocks until Glock said you can’t do that anymore Are those the KWC versions of old, or does somebody else make them? Just my opinion, but they are a better looking pistol than the M&P 9. 16 hours ago, Davegolf said: Took the freshly pimped TM G19 Gen 4 out today, some indoor action at Invicta Black Site. Absolutely love how snappy the Gen 4 is even on lowest power gas, 45M flat trajectory on 0.25s, couldn’t ask for more from such a little gun! What brand are the slide and frame? Very nice work, by the way. Link to comment Share on other sites More sharing options...
JimFromHorsham Posted June 27, 2022 Share Posted June 27, 2022 @emilianoksathey are both made by Western Arms , the two tone version has a metal slide & barrel upgrade fitted (shooters design if I recall ) Link to comment Share on other sites More sharing options...
Davegolf Posted June 27, 2022 Share Posted June 27, 2022 @emilianoksa All stock TM I sanded the finger grooves off the lower as they were just annoying and then stippled and painted it. The slide is stock just Cerakoted in patriot brown, Tritium front sight, cowcow rear. Link to comment Share on other sites More sharing options...
emilianoksa Posted June 27, 2022 Share Posted June 27, 2022 38 minutes ago, JimFromHorsham said: @emilianoksathey are both made by Western Arms , the two tone version has a metal slide & barrel upgrade fitted (shooters design if I recall ) Thanks. Pity they are no longer available. 38 minutes ago, Davegolf said: @emilianoksa All stock TM I sanded the finger grooves off the lower as they were just annoying and then stippled and painted it. The slide is stock just Cerakoted in patriot brown, Tritium front sight, cowcow rear. Excellent work. Considering it is all stock, that is very impressive. Does the cerakote on the slide really reduce the risk of the plastic scratching? Link to comment Share on other sites More sharing options...
Davegolf Posted June 27, 2022 Share Posted June 27, 2022 Cerakote is tougher than the plastic yes, but obv if you grind it up brickwork it wont last, but neither would any coating/anodising etc Link to comment Share on other sites More sharing options...
emilianoksa Posted June 27, 2022 Share Posted June 27, 2022 Thanks again. Link to comment Share on other sites More sharing options...
Ebeneezer Goode Posted June 27, 2022 Share Posted June 27, 2022 (edited) A couple of shots of the USP 9 that I got recently and one with the UAR in tow - think they complement each other well aesthetically, nice sci fi ish vibe and something a bit different. Rather enjoying this pistol shooting it in the garden and skirmishing it this Sunday. Will probably paint the slide in Halfords OD like all my others... Edited June 27, 2022 by Ebeneezer Goode GothicGhost, Tactical Pith Helmet, Floperator and 1 other 3 1 Link to comment Share on other sites More sharing options...
Cain-c-123 Posted June 29, 2022 Share Posted June 29, 2022 The finished mtw build is actually finished now 😂🤘🏻 SeniorSpaz87, Tactical Pith Helmet, Nick G and 1 other 4 Link to comment Share on other sites More sharing options...
Alimcd Posted July 1, 2022 Share Posted July 1, 2022 AAP build starting to take shape, waiting for a pair of custom grip scales with Ruger medallions inset, low profile mount for the Viper and a freshly cerakoted metal upper receiver to come back from Jack at Airsoft Engraver with Ruger MK4 Competition trades Druid799, Nick G, Ebeneezer Goode and 1 other 2 2 Link to comment Share on other sites More sharing options...
Popular Post Alimcd Posted July 1, 2022 Popular Post Share Posted July 1, 2022 For every realistic pew I do, one of these happens Nick G, Druid799, frontsight and 3 others 3 3 Link to comment Share on other sites More sharing options...
alxndrhll Posted July 1, 2022 Share Posted July 1, 2022 6 minutes ago, Alimcd said: For every realistic pew I do, one of these happens Doesn't hold a candle to the chrome and carbon fibre Thompson 😂 Alimcd 1 Link to comment Share on other sites More sharing options...
Popular Post Davegolf Posted July 1, 2022 Popular Post Share Posted July 1, 2022 AK105-VSU (11.5” barrel) I really enjoy making paint and environments work, spent a lot of time and collected a lot of Cerakote swatches and loads of aerosol tests. Some colours are very ‘reactive’ and play to the human eye changing quite dramatically in different light and backdrops. Skara, Dan Robinson, Hatchet and 10 others 5 8 Link to comment Share on other sites More sharing options...
SerialNoodle Posted July 2, 2022 Share Posted July 2, 2022 Lovely 😍 On 22/06/2022 at 20:31, Davegolf said: @SerialNoodle what is that rifle? Looks epic! Isn’t it already 9mm? 'Tis actually a TM Type 89 GBBR. It runs on a 5.56 magazine though I'm getting a fancy 9mm HPA conversion made for it. Link to comment Share on other sites More sharing options...
Popular Post frontsight Posted July 3, 2022 Popular Post Share Posted July 3, 2022 Now I just need a black leather holster and only speak in eccentric catchphrases Nick G, Jacob Wright, Alimcd and 5 others 3 5 Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted July 3, 2022 Share Posted July 3, 2022 “You do not get to watch my fucking television” frontsight, Jacob Wright and Floperator 2 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted July 3, 2022 Moderators Share Posted July 3, 2022 On 01/07/2022 at 18:32, Davegolf said: AK105-VSU (11.5” barrel) I really enjoy making paint and environments work, spent a lot of time and collected a lot of Cerakote swatches and loads of aerosol tests. Some colours are very ‘reactive’ and play to the human eye changing quite dramatically in different light and backdrops. Dave, that can is just sexy as f#ck 😍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now