GeorgePlaysAirsoft Posted March 17, 2020 Share Posted March 17, 2020 Is that a candyman custom at the top? Link to comment Share on other sites More sharing options...
Asomodai Posted March 17, 2020 Share Posted March 17, 2020 X95 me. Plastic fantastic, inside and out. GeorgePlaysAirsoft, Skara and Tackle 2 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted March 17, 2020 Moderators Share Posted March 17, 2020 On 17/03/2020 at 18:43, Asomodai said: X95 me. Plastic fantastic, inside and out. Expand Is it actually any good though ?, I saw one at a giveaway price a while back but couldn't find a decent review anywhere. Link to comment Share on other sites More sharing options...
Asomodai Posted March 17, 2020 Share Posted March 17, 2020 On 17/03/2020 at 19:15, Tackle said: Is it actually any good though ?, I saw one at a giveaway price a while back but couldn't find a decent review anywhere. Expand Here are some of my thoughts. I got mine for 42 euros from here. The price has gone back up a bit but still good price. https://www.kotte-zeller.de/umarex-iwi-x95-advanced-komplettset-aeg-6mm-bb-schwarz Tackle 1 Link to comment Share on other sites More sharing options...
Syks Posted March 17, 2020 Share Posted March 17, 2020 My primary for cqb, absolutely LOVE this beast Albiscuit, Nick G and EDcase 2 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted March 17, 2020 Share Posted March 17, 2020 On 17/03/2020 at 11:06, GeorgePlaysAirsoft said: Is that a candyman custom at the top? Expand yup one of ten ever made. Talking of plastic AEG's this turned up today. It's been my Unicorn gun for over 10 years as it was impossible to get them from South Korea until recently. It's just a mock up at the moment as I'm waiting on a V2 gearbox and motor to build it up. LoneTactix, Nick G, Darkmikey22 and 1 other 3 1 Link to comment Share on other sites More sharing options...
Popular Post Stevo4345 Posted March 18, 2020 Popular Post Share Posted March 18, 2020 Been dipping a toe into DIY teching, tried spraying for the first time. G&G SOC M14 tiger stripe attempt #1. I'll install the longer barrel group once I get the gearbox sorted out, using the short SOC barrel assembly here to see how the stock looks with everything installed. EDcase, Nick G, B.S and 8 others 9 2 Link to comment Share on other sites More sharing options...
Tec-Spek Posted March 18, 2020 Share Posted March 18, 2020 Added a surefire X300v + pressure switch, Nice compact and bright enough, has strobe as well. Its a pistol light but I think serves on a rifle just perfect with the tail switch added. Pretty much done, covers all scenarios that I will use it in. I usually run it fully loaded with max attachments, sometimes just the eotech. Getting rid of the front and rear flip sights was strangely satisfying. GeorgePlaysAirsoft, MikeMarden, DarkAssassin and 1 other 3 1 Link to comment Share on other sites More sharing options...
SgtTalbert Posted March 19, 2020 Share Posted March 19, 2020 I am just missing the MP5SD and the Delta Tec-Spek, PopRocket123, GeorgePlaysAirsoft and 1 other 4 Link to comment Share on other sites More sharing options...
B.S Posted March 20, 2020 Share Posted March 20, 2020 I've been keeping myself busy with a photoshoot given current circumstances, so prepare for this to be a fairly long post! Almost all of my kit, and all my guns, layed out; I set everything up into little themed groups, and took a few artsy shots of each. WWII Kit: SAS: MTP: Sorry for the long post! Photography has long since been something I'm interested in, but taking these pictures really reminded how much I enjoy the process. I hope you've enjoyed the result. Goodday! Philby21, Tec-Spek, DarkAssassin and 1 other 4 Link to comment Share on other sites More sharing options...
Popular Post MikeMarden Posted March 20, 2020 Popular Post Share Posted March 20, 2020 Finally picked up a TM MK46 Mod 0. Bit of fettling done prior to picking this up today. Added a few external bits I picked up over the past few months: Zenitco Klesch 2 Dual IR / LED Zenitco Perst 4 PEQ Zenitco brightness adjustment pads FMA Gas pedal G&G rechargeable tracer unit Pulsar LRF Trail XP50 Standard Marui foregrip Thing is an absolute beast, will be running bare bones during the day / full up for night action SgtTalbert, GeorgePlaysAirsoft, Heath and 5 others 1 6 1 Link to comment Share on other sites More sharing options...
Tec-Spek Posted March 21, 2020 Share Posted March 21, 2020 On 20/03/2020 at 22:45, MikeMarden said: Finally picked up a TM MK46 Mod 0. Bit of fettling done prior to picking this up today. Added a few external bits I picked up over the past few months: Zenitco Klesch 2 Dual IR / LED Zenitco Perst 4 PEQ Zenitco brightness adjustment pads FMA Gas pedal G&G rechargeable tracer unit Pulsar LRF Trail XP50 Standard Marui foregrip Thing is an absolute beast, will be running bare bones during the day / full up for night action Expand Super impressive looking & awesome setup. Are these Gas or AEG? AEG would just super sad me, if it's gas I would love to hear it going off! Either way very cool. Nice choice for the laser, did you go green or red? Link to comment Share on other sites More sharing options...
MikeMarden Posted March 21, 2020 Share Posted March 21, 2020 On 21/03/2020 at 00:54, Tec-Spek said: Super impressive looking & awesome setup. Are these Gas or AEG? AEG would just super sad me, if it's gas I would love to hear it going off! Either way very cool. Nice choice for the laser, did you go green or red? Expand It's an AEG - As far as I know zero plans for a Gas version. Went for the red laser, I was more after the IR pointer so the Perst 4 with red laser was the lower cost option! Link to comment Share on other sites More sharing options...
FreeFrag.UK Posted March 21, 2020 Share Posted March 21, 2020 On 21/03/2020 at 00:54, Tec-Spek said: Super impressive looking & awesome setup. Are these Gas or AEG? AEG would just super sad me, if it's gas I would love to hear it going off! Expand To be honest the NGRS Mk.46 sounds like an absolute beast from the reviews I've seen. MikeMarden 1 Link to comment Share on other sites More sharing options...
Tec-Spek Posted March 21, 2020 Share Posted March 21, 2020 On 21/03/2020 at 06:49, MikeMarden said: It's an AEG - As far as I know zero plans for a Gas version. Went for the red laser, I was more after the IR pointer so the Perst 4 with red laser was the lower cost option! Expand I have the same perst-4 red, can't go wrong with either. Have you put some plexi / shielding on the laser lens? I see something a bit different. Im sure the AEG is very good, im not knocking it. If there was a gas version though that would be something. On 21/03/2020 at 09:40, FreeFrag.UK said: To be honest the NGRS Mk.46 sounds like an absolute beast from the reviews I've seen. Expand Don't mind me I'm just not a fan of AEG's for years now since gas. Modern AEGs can be very good but gears, motors and batteries in guns just don't do it for me. No hate, you in the back put that pitchfork down, I see you ! Link to comment Share on other sites More sharing options...
MikeMarden Posted March 21, 2020 Share Posted March 21, 2020 I had some 17mm diameter 3mm thick petg acrylics made, sits nice & snug & doesn't impact the laser or IR, mitigates it being shot out Tec-Spek 1 Link to comment Share on other sites More sharing options...
Tec-Spek Posted March 21, 2020 Share Posted March 21, 2020 On 21/03/2020 at 13:57, MikeMarden said: I had some 17mm diameter 3mm thick petg acrylics made, sits nice & snug & doesn't impact the laser or IR, mitigates it being shot out Expand Thanks for the info, I'm looking at options to protect mine from the same. Link to comment Share on other sites More sharing options...
MILITATED Posted March 21, 2020 Share Posted March 21, 2020 I saw this and just had to share it here 🤢🤮 DarkAssassin, FreeFrag.UK, PopRocket123 and 1 other 3 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted March 21, 2020 Moderators Share Posted March 21, 2020 On 21/03/2020 at 14:27, BigBlackGlock said: I saw this and just had to share it here 🤢🤮 Expand Sorta mixed about this, part if me thinks it'll be cool with a drum mag . Link to comment Share on other sites More sharing options...
E21A Posted March 21, 2020 Share Posted March 21, 2020 On 21/03/2020 at 14:27, BigBlackGlock said: I saw this and just had to share it here 🤢🤮 Expand California compliant 😂 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 21, 2020 Supporters Share Posted March 21, 2020 On 15/02/2020 at 17:02, HuttArmouries said: Not all that recent but ive only just got all the parts to get it working. Daewoo k2 from toystar. Just need to repaint the flash hider. Expand Dont those start as springers? Or is there an AEG version im unaware of? Link to comment Share on other sites More sharing options...
HuttArmouries Posted March 21, 2020 Share Posted March 21, 2020 On 21/03/2020 at 20:10, SeniorSpaz87 said: Dont those start as springers? Or is there an AEG version im unaware of? Expand They come with a springer mechanism which is shaped like a v2 gearbox. they also provide a different mag release and grip so you just take it out and drop the gearbox in Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 21, 2020 Supporters Share Posted March 21, 2020 On 21/03/2020 at 22:23, HuttArmouries said: They come with a springer mechanism which is shaped like a v2 gearbox. they also provide a different mag release and grip so you just take it out and drop the gearbox in Expand Neat. Ive actually got one of these lying around. Didn't really know what I was buying and was annoyed it was a springer (guy selling didn't have the greatest English so some miscommunication), but had heard they can be converted. Didnt want to open it up until I knew that it could be. Link to comment Share on other sites More sharing options...
HuttArmouries Posted March 21, 2020 Share Posted March 21, 2020 On 21/03/2020 at 22:45, SeniorSpaz87 said: Neat. Ive actually got one of these lying around. Didn't really know what I was buying and was annoyed it was a springer (guy selling didn't have the greatest English so some miscommunication), but had heard they can be converted. Didnt want to open it up until I knew that it could be. Expand There are also the academy springers which cant be converted. Is the reciever in one or two pieces? if its a toystar there should be a latch behind the rear sight you can push to open it. Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 21, 2020 Supporters Share Posted March 21, 2020 On 21/03/2020 at 22:48, HuttArmouries said: There are also the academy springers which cant be converted. Is the reciever in one or two pieces? if its a toystar there should be a latch behind the rear sight you can push to open it. Expand Its a Toystar direct from Korea. BNIB and everything. Didn't see any spare parts like you said in the box, but Ill have to look again and see. Idk where the box ended up, ill have to find it later. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now