Leaderboard

After being too impatient to wait to find a specna, I opted for the S&T G36V with the grenade launcher (Because why not?). Changed out the launcher with the mg handguard, put a ZCI dual optic on (After a lot of sanding down, it doesn't fit directly onto the S&T) and can now call the MG36 done.

“We know how to get this firing” imagine the price if it worked 😂

So this 👆is the fruit of my labour. I'm going to post a bunch of pics I took during the build and put a parts list together to bore you all with, but today was about getting it onto the range to see what it could do. A couple of weeks ago, as an out-of-the-box M4A1 Carbine, it was hitting out to 60m on .28g BBs and Ultrair, with a good degree of accuracy, which, for me means hitting a Figure 11, roughly centre-mass, at that distance. Made me smile, and smile and smile. Today, testing this iteration was, well, a huge disappointment. Although the range was like-for-like on .28s and green gas, I just could not get any consistency in shots. One would go straight as a die, resulting in a nice metallic 'clink' off the target. The next would fall short, barely half the distance, then another would fuck off into the stratosphere. Adjusting the hop made very little difference to the randomness of the shots. The only internal changes I made were a different Zet plate (which worked brilliantly) an enhanced nozzle return spring and a different hop nub, all by BavTac. I can only assume that, while replacing the hop nub, either the nub or hop rubber is not sitting squarely. Adding weight to this theory is the fact that, with the can on, BBs were shattering before leaving the barrel, or dribbling out like it had a prostate problem. Any other thoughts on root cause before I whip the tools back out? On the plus side, chucking in .3s and .32s, still with regular green gas, when a shot did go straight, it was heading to the 70m target, so I'm hopeful that when I get this sorted, it'll be chucking white plastic death out to decent distances. Oh, and IMHO it looks gorgeous. Yes, it's another URG-I, but it's still a handsome beast. Gas testing will have to wait. I now have 8 variants to try in the name of science...and bored curiosity.

My thoughts exactly Wavey. Hoping it is that simple. Can't imagine it's anything else as, mechanically everything else I touched seems to be working fantastically. I won't deny having sex fingers though, that have a tendency to fuck everything they touch, so you never know 😂 On my other MWS I don't remember .32s doing that well, but I think I should give them another chance based on today's trial. What hop/barrel set-up are you using to get those results? And of course, which gas? (The Vorsk cans arrived today so I'm ready to test, once I sort the hop issue)

"comes in a custom made display case" I cringe when people go on about something being "custom made" in that context as if that makes it worth more money. The custom-made case was made for his tastes and requirements so he paid for the labour and the sentimental value. That doesn't mean it's worth much to Joe Public. I would like to know the thought process or the smack required to mark up the value so much.

Am I the only one gagging to know what this rare & obviously expensive new toy is ???????

GBBR Versions of an SKS and a Sterling

Thanks for all the responses guys. @Nick G UPS has already sent me the amount owed for import duties £200+ but I expect this will be higher as they charge £13 a day by the time it finally gets processed. I think you're right with regards to the address and UKARA not matching potentially being part of the problem. My thinking at the time was if it was sent to my work address (That imports 100s of Airsoft RIFs and parts every month) it would be less of an issue and also with the item being a RIF not left outside at home or at a collection point whilst I was at work, a more responsible decision. I have contacted the courier but as of yet had little help from them, will try again on Monday. @Pseudotectonic Attached is the form I was sent along with a RIF declaration (which was easy enough to fill in). @Asomodai @C-Diddy fingers crossed then otherwise this will have been a very expensive lesson. I did ask the sender to include in the package my home address (image from an invoice from my place of work) alongside my UKARA and image of my Passport but they would have to open it to get that I guess. @Tommikka well hopefully they are just busy and just haven't gotten round to sorting it but I believe as pointed out the UKARA address mismatch is probably the problem. I'm just stressing abit as it was quite an expensive purchase and worried it will get destroyed. Thanks for all your help everyone, hopefully I can get it resolved this week coming.

Re: VFC M249 I guess the full weight version would add raw material cost AND delivery costs that sellers might not fancy. So somewhat-sensible business decision not to go the chonky-boi route?

He seems to make a habit of damaging his toys.

He also put this up on Zero In... https://forums.zeroin.co.uk/forum/classifieds/rifles-smg-s-for-sale/electric-rifles-smg-s/3310893-g36k-with-ak-mag-well-and-mag

It's the story of a dyslexic, agnostic, insomniac. He's lying awake in his bed. Wondering if there is a Dog.

The sun was shining so emptied the GBBR rack

Realised I had the parts to make something interesting. For your consideration: an alt-history Olive Drab AR-15 Dissipator build. Imagine the chopped short M16s from the Vietnam-era became standard issue all the way to the A4 variant. Then make it a lovely military-ish green. Recently a real steel Dissipator (that's an AR-15 with a 16 inch barrel and a full rifle-length gas system) was released for sale by Anderson Arms, and this video popped up on my YouTube feed. I really love the full-length-but-shorter look of a Dissipator, and I think sticking on an A2 handguard and a full stock makes it look a lot more military than the Magpul equivalents I had on it previously. What do you think?

The latest and last for a while addition to my collection of HKs an LCT G3 and it is great! just waiting on 3 more midcaps to arrive and should be good to go for a skirmish!

I was very disappointed when the limousine I ordered, didn’t come with a driver. I spent £400 and had nothing to chauffeur it ☹️

UPDATE Unfortunately I won't be offering these for sale for the foreseable future. I just found out that my family are only willing to store them and not post or allow a buyer to collect them. Yes, sad but true. I'm going to try and arrange for a friend to collect them so he can help me sell them online but that won't be for quite a while. I'm living abroad so can't do anything hands-on myself in the UK.

Check your hop unit isn’t misaligned, when replacing the rail and barrel nut, it can go a bit skew.

Man, I've only been away from the hobby since 2002, have some sympathy for the guy who's back from airsoft jail and is only just learning about what gnus have come out in the past 20 years.

Got this far with my g3 as u got fed up with it being 4 shades of grey and black. Can't decide whether tinleave it at this or do something more to it. It will have the vortex optics reattached and wrapped in some woodland scrim netting as I just couldn't bring myself to spray the sights.

Last owner gave them away for free. I've kept two and i'm selling the other three, which I don't need, there's nothing wrong with that. Wouldn't be the first piece of gear i've flipped in airsoft either.

Oh, and I forgot, AEG versions of all the top fed LMG of the 1930s-40s. The ZB-26, the Bren, the Vickers-Berthier, the Type 96, the MAC 24/29 etc...

Maybe you are gagging cause ya false chompers are moving about 😂😂😉

If you're going to stick to collection only, I'd ask a bit more than that, or a bit less. Why? Because the key issue is whether there's a collector nearby who's interested in them as historical pieces. If there is, then they might pay more. And if there isn't, then you're only going to get sweetie-money offers for them anyway. Posting (and splitting) will significantly increase the chance of finding that collector.

Most of mine are almost readily available in the classifieds, just can't justify the purchases at the minute. Wood stocked Ww2 rifle: Garand/Kar98k GBBR Thompson B.A.R Flux Raider build pistol G3 with sliding stock Something that hasn't been made - DP-28 Machine gun. My current build will hopefully be a UK unique AK, but time will tell if I'll get it to look how I want it. And it will need a HPA engine to operate.

Too expand, the GHK and VFC have a more realistic trigger mechanism if a ‘true replica’ is what you want. However if you wanted a GBBR to build into any modern (or old) variant AR imitation visually, and to plink with and strip / rebuild then the MWS is the best platform. Because it has massive aftermarket support, has less fiddly parts that are likely to break or get lost.

If you are plinking go with the GHK. Swap the valve out to a Co2 one, get yourself a Sodastream adapter and direct fill Co2 into the mag (AKA devil hunter mod). Replace the chamber base to steel and drop a M4 carbine buffer spring in. Best recoil I have felt without powder and will empty a mag in FA with snow on the ground like a sowing machine. GHK trigger break and reset is very good if a little light (around 3lb) can get after market springs but if only plinking bending the legs of the spring should suffice if you want to change the weight of the trigger. If you can build a real AR you can build a GHK https://www.youtube.com/watch?v=QiDD-aCMH84&ab_channel=JeffieJeff'sAirsoft https://www.youtube.com/watch?v=cHyIIuYWMlw&ab_channel=A'jvi https://www.youtube.com/watch?v=It0o9i7xGnY&ab_channel=TOTALRECOILAIRSOFT

FIX BAYONETS!!!!!! took a bit of brute force to put it on but happy with it also used some steel wool to make the gun look cooler

I was thinking about it a bit, and the conclusion I came to is that aside from the weight of the L85 the big issue is that there's no industry around it to iterate improvements. Our government has killed both private and public small arms production/development in the UK for the most part, so unless we setup and pay loads of money for specific iteration work and improvement on the SA80 series then nothing gets done. I don't think it'd be wildly untrue to say that essentially the opposite is true of the AR platform in the states; there's more companies than probably any one person knows, all of them constantly trying to beat the others at offering the latest and greatest variant of the western world's darling assault rifle. It's been a game of decreasing returns on investment for a long time now, just chipping away at very small performance increases as the technology is pretty much at it's limit, but when you have unimaginable amounts of money being poured in to seeking out those small gains you end up with an impressive end product. Heck that bloke pictured has almost nothing of British origin on him anywhere, even MTP as a pattern was mostly developed by Americans with only a smidge of input from ol' DPM. The biggest capability increases in the past 10-15 years have been in optics, lasers and other accessories and the other issue with the L85 is it's not quite as good of a mounting system for those things as the AR. Obviously the A3 is a lot better but not quite on the same level. Partly through the weight, partly the general layout and ergonomics and the fact all those gadgets are again designed with an eye on the DoD/US market (and therefore the AR layout even if it's something like the XM7). I'm sure other have seen US SOF guns (especially longer range setups) absolutely dripping with gadgets to the point you can barely see the rifle anymore. You can easily fit 10s of thousands worth of extras on something like a 6.5CM semi-auto that might 'only' cost say $5-8k and those things allow the shooter to pull off pretty crazy feats, especially at night and at long ranges. That's the sort of thing can really give us an advantage now over a bloke with an SVD or PKM. Or you know.. a PLA infantryman.

Anyone else like drawing concept art to get a general idea of what a build might look like? I recently made this one for my current build. This one is a full concept art but sometimes I just photoshop parts together. It's a good way to see if things fit. Edit: The quality dropped in the attached file, here is a higher resolution version and a closeup of the Torch and NGAL, which I now see says "DFA" instead of "FDA" https://i.imgur.com/1an3EeZ.png https://i.imgur.com/PS2tzVW.png

You can

HK P7 like Hans Gruber you say..... ah that'll be a Stainless P7M13 then.

GBBR semi-auto battle rifles. SAFN-49, AG-42, SKS and MAS 49/56, the lot. Real wood, real metal, rubber bayonets. Potentially a BB Trap shower type rifle grenade attachment with those.

[WORK IN PROGRESS] Old Arktis 2REP Crossrig with proprietary ammo pouches. Remainder described in comments. AMA. The Arktis Crossig is modular. It has X straps and also H type yoke, which, combined with a belt, turns it into a belt webbing. Rigid mags are some Chinese airsoft retailer. Dump pouch by Warrior Assault System. Admin pouch by Wynex. Holster is IWI. Colt is a WE metal frame 1911. [EDIT] Missing here : Galaxy S10 case and attachment (3D printed) - on route - and PRC 152 with PTT and headset (because no money tree grows in my garden).

Tried it once

3 days isn’t long I had an import recently which didn’t need any declarations, just charges It took 8 days for charges to be assessed. Then it waited for verification another 4 days for the charges to be confirmed and released to the regional depot I was monitoring the tracking daily and periodically calling the helpline for updates on the unlisted stages, and I went to the regional depot to pay & collect - my card telling me I needed to pay charges didn’t arrive until I was back home after the weekend It was held for 14 days to process the calculation of charges, and this had a well documented customs declaration on the package

I've said this on a couple of other threads recently, so apologies for repeating. Last month I bought a RIF from WGC Shop in Hong Kong. From point of order to delivery was less than two weeks and there wasn't any additional duty or fees to pay. My UKARA was printed on the outside of the box and the package hadn't been opened for inspection. However, a few years ago, I bought a RIF from Swit Airsoft that took around three weeks to deliver after receiving a £90+ charge from HMRC. I suspect that the mismatch between UKARA address and delivery address is part of the issue, as I know UK retailers won't deliver if the addresses don't match. ** @Asomodainailed it 👆

latest play thing

I would imagine the tax bit relates to the fact they are going to ask you to pay duty and vat on it. Unless the retailer is registered to collect UK taxes on behalf of HMRC The fact the adress differs from your UKARA might not help either tbh, especially as it's a business address . Do the courier have a contact number you can phone ?

HK Collection, you got one of these?

Got this little beauty in the post this morning. A VFC G19x to replace my aging WE G17. It well made and feels much nicer than my WE one.. Hoping to try it out over the next few weeks.

SOTAC Eotech EXPS arrived today. Looks smashing on the M906C. The CR123A batteries arrive tomorrow, rotten luck.

Its been a couple of months but here a some fotm my last game a Sierra Golf One.

Final bit (sort of) for a new MWS build.

When you're at STANTA and someone says "you're to old to run the Battle Alley". Not grinning, gasping for air...

Krytac crb-m Helikon-tex pencott wildwood cammies Direct action pc and warrior pouches

My County Sheriff LEO loadout, just unsure whether to swap the chest panel for a VX plate carrier and awaiting a full length MP5A4 to arrrive. Carrying a Glock 17 with GTL10 on belt with 2x extra mags and the chest panel has 4x MP5 midcaps with a Glock 27 and 2x extra mags. Just need to swap the plain brown cap for a King County sheriff one and should be done.