Leaderboard

I hear that each Novritsch brand BBs is individually gargled three times by Nov himself.

No other excuse needed to roll out this classic

Africa... we're all teenagers at heart.

Well, turns out I'm not 'a man' but I am a dick... picked them all up & isolated them in the origional carton then proceded to fill my speed loaders (with fresh bb's) which arrived today and turned one upside down to see how the handle opens out and promptly dumped the fresh bb's on the floor too. Think I'll just go to bed before I fall down the bloody stairs or something. Icing on the cake is, I found the rear sight from a glock & a tiny spring which I suspect it's from the blowback lever on an L85A1 I have getting fixed at the moment. NN lol.

MWS mostly done. Will eventually replace the repro CTR stock with a real-steel Magpul one and will probably get a Visionking scope for it to replace the Strike Systems one on it at the moment. Might get a 45 degree mount for a red dot for close shooting, but we'll see. Also, with the suppressor off and the stock all the way in, it fits in the smaller rifle pouch of my larger gun bag, so I can take both it and one of my (many) bolt actions in one bag now

Nothing flash or fancy but it is my first. 😍

So far , after half a dozen mags to test it’s been flawless , nice bit of resistance to it , in the past I’ve had floppy BAD problems 😛

At £350 ( £330 in some places) these are an absolute bargain for a step into the MWS system , that’s my opinion of course but it really is a decent , nice looking , well finished and working site legal out of the box gun that appears to be compatible with TM oem & aftermarket parts. I have since added some genuine Magpul furniture , XL -K grip , SL-K stock ,Mlok AFG & BAD lever , plus some nicer VFC micro BUIS , yes it’s more money , no it’s not needed , but I did it anyway 😛

100% my thinking too! Only drama being, as long as my wife doesn't see all my black M4s/ARs in one place at the same time, i'm ok and it is entirely plausible that I own just the one..... A tan rifle will somewhat stand out as new......

Accessories like what, exactly?

I have never wanted to own a bottle of Lynx Body Wash Until now Which one should an Airsofter buy? 'Axe'? 'Blast'? Asking for a friend....

wash them with a colander under running water and some soap, otherwise you won't get rid of the dust enough

Even if they were Aegs, it would be a nice development. Would fill the hole of various Cold War Armalites that was left by G&P's departure.

Some interesting photos on VFC’s Facebook page from their stall at TADTE 2023. Nothing close up or specific, but definitely an MP5SD and a bunch of M16’s. Hopefully all GBB’s. Looks like M16A1 with original and later handguards, also an M203 setup which would be awesome, and what looks like an M16A4. If these are GBB’s coming out next year then my bank account is going to be taking a hammering again. It’s a shame there’s nothing there with the A2 style carry handle though.

No. I've looked at most of the youtube videos, and that's the video linked from the seller in the items description. He just effortlessly pushes them in, and it's absolute bullsh*t! 😂 I sent the guy a message on ebay and he's offered to fit them for me as long as I pay return postage so fingers crossed. 😁

It is, I reckon the limited edition price is around £100

A good video came out on this a few days ago... https://youtu.be/lVakt4vEEqc?si=C0vK7tTk4hTi001F

It’s really nice, with good strong recoil. I’ve had a few A1’s and A3’s over the years, but always ended up selling them. I’m intending to keep this one and just finished putting my M203 on it. Just waiting for my trademarked lower coming from KYAirsoft and then it’s all done. As far as GBB M16’s go, for me, WE is the only real option. I think the Golden Eagle one is plastic and the only other option is to build one if you can find all the relevant parts. So if VFC are going to release a range of GBB M16’s, there’s definitely a gap in the market for them. There’s a clearer photo of them from VFC’s Facebook page today. Still can’t tell if they’re gas or not, but I’ve asked the question and waiting for someone to reply.

I thought that they were a limited production run. I've been guarding mine thinking its worth a fortune 😂🤔

extra bio

That'll be me, but I'd much rather..............

This chap "joined the community" and posted a sales ad seven minutes later; I thought that members had to post a certain number of times before they could put up a sales ad. Decent price though.

Yes. Common problems with it catching consistently, many people have had the issue…you must be lucky 🙂

Does the bad lever work ok on these Jim? Stock MWS has issues, normally requires a new zet plate.

Was going to get a suppressor for one of my MP5s then thought HK have already solved the suppressor issue........

I reported him earlier 👍🏼

Hi! You saved me from an unnecessary expense. I've got Umarex G17 Gen4 CO2 and planned to upgrade the chamber for the linked ML. (my problem is its innaccuracy) There is Posseidon Striker chamber for Elite Force G17 Gen4: Poseidon Striker Hop Up Chamber Kit for Gas Blowback Pistols (Model: Elite Force GLOCK 17), Accessories & Parts, Gas Gun Parts, Gas Gun Hop-Up - Evike.com Airsoft Superstore Would that be good for an Umarex G17 Gen4?

Ive done that with 1000 assorted size wood screws. The plastic container is like a lunchbox and has a handle at the top, but the flap doesn't go over it that handle. SO when you pick it up and it's not clipped at the side, it just falls onto the floor. The worse bit is, it's not like you accomplish anything picking them up and sorting them, you're just back to where you've started.

It's a rite of passage. Was playing a few weeks ago, opened a new 1kg bag of BLS 0.28g BBs to put into my Odin and dropped more than half the bag onto the table & floor 🙃 I think I may invest in a few of those fabric BB bags that have the rigid spouts.

@Herrgh Get lots of those batteries, I seem to go through them way too fast. I'm not sure if the Sotac has an auto-off feature - if it doesn't, my experience says it's too easy to leave a sight left switched on, and the battery is dead within a week! My recent purchases... already mentioned elsewhere, but well feck it Double Eagle M904G from the classifieds... thanks @Speedbird_666, the gnu came in beautiful condition - it gave me that New Gnu unboxing buzz when I got it, very enjoyable Double Eagle Falcon control unit - thanks @JVacation, allowed me to swap the newer, shimmed and lubed gearbox from the 904 to my 906, and end up with two working toys rather than one! As I'm now in possession of a 906 and a 904, I'll probably run up a quick comparison (perhaps with video) of the two gats, which might be useful for future DE purchasers.

I did the same thing with 5000 BLS .32g. My man, you’re in good company!

No that's ok thanks. Just interested. I have trouble printing my name 😂 Regards

Glad to hear that the ETU worked well!

Damn. Been looking at WE GBB m16a3/TM mws to make a M16a4.... guess I should wait to find out now xD

SOTAC Eotech EXPS arrived today. Looks smashing on the M906C. The CR123A batteries arrive tomorrow, rotten luck.

Well the dodgy bearings on our washing machine turned out to be a dozen .28's. If I had used bios she would have been non the wiser😂

If you don't do no. 3, are you even a man? 🙈 🤣🤣🤣

That is a damn fine idea.

Hi bud and welcome to the pleasure dome👍 Crikey you have gone in a bit gung ho with the folding lol.Hope you are gonna take to it😂 Have a look on 'play airsoft.com' You should find most sites near you. Good luck,enjoy and call your hits!🙂 Regards

And let's be honest, they almost certainly will snap at some point.

Guys, be assured we hold your commitment to the 'early adopter' cause in the highest esteem, and it's worth every extra penny / pound you've spent!

Counterpoint: since shimming the barrel is about the cheapest and quickest thing that it's possible to do, why not?

Hands down best one, used it for over 2 years almost every weekend still going strong. https://core-airsoft.com/product/co2-filler/ Edit: looks like he out of the adapters. Bet if you msg him he will make you one to order though. https://core-airsoft.com/product/sodaconversion/

What do dark humour and unvaccinated kids have in common? They don't get old

I used the smoke silencer in anger today and had a blast. I really need to sort out a tracer as well as at one point I was in a dark corridor in a prison and firing semi with no idea if my BB's were hitting the target because of all the smoke and flash (this was a whole lot of fun and no I wasn't blind firing, I'd put the red dot on the target and fires a couple of BB's but fook knows if my BB's went on target as I couldn't see a thing because of the smoke and flash effect). Oh and I seem to have ended up with a Spectna Arms Mk18 with the Gate mosfet fitted.

Now with the RDS on the Elcan, and proper Grip Pod System grip. C’est fin!

I wouldn't worry so much about the M-Lok as that gopping stock but each to their own.

A man is working in the fruit and veg department of his local supermarket when an old lady taps him on the shoulder and says "excuse me I can't find the broccoli, where is it?" He replies "sorry madam we've sold out but there should be another delivery tomorrow" and she walks away. A few minutes later the same old lady taps him on the shoulder and asks again "where's the broccoli?". Again he tells her they've sold out but the should be a delivery tomorrow. Another few minutes go by and once again she taps him on the shoulder and asks "where's the broccoli?" Getting annoyed he replies "can you spell cat, as in catastrophe?" "C A T" she answers so then he asks her. "Can you spell dog, as in dogmatic?" "D O G" she replies. "Now can you spell fuck, as in broccoli?" He asks. Confused she says "But there's no fuck in broccoli" to which he replies "That's what I've been telling you for the past 10 minutes"

Cats are like stripers, they sit on your lap and pretend to love you.