Stevobeavo Posted February 10, 2023 Share Posted February 10, 2023 (edited) 4 hours ago, Impulse said: Fortunately the "only orders over £135" for the UK tends to push me away, but before that I would agree with you. Bought so much from Taiwangun in the past Put a order request Into patrolbase to order stuff from their site. Takes 4-6 weeks as I think they do a monthly request order to them. I've just had a few bits turn up today from doing this. Edited February 10, 2023 by Stevobeavo Link to comment Share on other sites More sharing options...
Stevobeavo Posted February 11, 2023 Share Posted February 11, 2023 (edited) Mag adapters and mp5 mags for my DE UTR45 turned up today. Also a Daniel defense handguard I got off here turned up. Seems to be a insert in the barrel nut to make it narrower so doesn't fit over my outer barrel., So I'll take it it into work and see if it presses out Edited February 11, 2023 by Stevobeavo Link to comment Share on other sites More sharing options...
Supporters sp00n Posted February 11, 2023 Supporters Share Posted February 11, 2023 10 hours ago, Speedbird_666 said: Lovely gun - but that Red Dot is gopping. It’s quite nice to use though …. It’s the mount that dot is on that’s the true rare thing Link to comment Share on other sites More sharing options...
Speedbird_666 Posted February 11, 2023 Share Posted February 11, 2023 13 hours ago, Stevobeavo said: Mag adapters and mp5 mags for my DE UTR45 turned up today. Those mags look great in the UTR45. It was the chonky mags that put me off the gun, but MP5 mags are much more practical. Link to comment Share on other sites More sharing options...
The Waco Kid Posted February 11, 2023 Share Posted February 11, 2023 I got an as new complete LC1 large Alice pack (yup another one) plus a set of SR1 (1st Gen) ITW Nexus buckles to refurb some kit. I’m not sure which is more exciting! 😻😻😻 JimFromHorsham 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 15, 2023 Share Posted February 15, 2023 Holy Warrior on the way The Spectre DR is just TOOO BIG for my 416 Tackle 1 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted February 15, 2023 Share Posted February 15, 2023 (edited) My Sotac EXPS3 sight has turned up turned up (late... the shop owner was on hols, and then Snail Mail lived up to its name too, it was sent on Friday) £55 from eBay. Maybe I'll do a mini-review it in the thread where I asked which one to buy (and then bought this in a hurry), but the TL;DR version is the attractive reticle is nice and bright - but the brightness adjusters work in very fine increments (too fine?), the whole thing feels well built, the quick-release mount is good, and parallax is perfectly alright (i.e. horrible at absolute point-blank, a very few centimetres at 6-7m (more vertical than horizontal), and unnoticeable to my decrepit eyes at 15m+) I also bought a Red Dot Engineering sight protector... that will take a tiny bit of filing / Dremel work too fit, because it's too tight a fit, and there needs to be some relief around the battery cap retainer wire. Edited February 15, 2023 by RostokMcSpoons Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
alxndrhll Posted February 17, 2023 Share Posted February 17, 2023 Big personal win for me today, these puppies arrived and the gamble of going with a small reg paid off (been gradually working down from a large reg for the last few years). Fit perfectly, over the moon. Lozart and C-Diddy 2 Link to comment Share on other sites More sharing options...
C-Diddy Posted February 17, 2023 Share Posted February 17, 2023 11 hours ago, alxndrhll said: Big personal win for me today, these puppies arrived and the gamble of going with a small reg paid off (been gradually working down from a large reg for the last few years). Fit perfectly, over the moon. Yes lad! I bloody love Plat stuff. In fact it was chatting to you that convinced me to part with my cash and get some tiger stripe DAX. Got a big list of things to get from them and don't regret a penny I've spent with them since. Link to comment Share on other sites More sharing options...
alxndrhll Posted February 17, 2023 Share Posted February 17, 2023 6 minutes ago, C-Diddy said: Yes lad! I bloody love Plat stuff. In fact it was chatting to you that convinced me to part with my cash and get some tiger stripe DAX. Got a big list of things to get from them and don't regret a penny I've spent with them since. I maintain that I hate the knee pad design granted that's not unique to the Platatac ones, I just loathe the Crye knee pad design/system and genuinely can't fathom how its last so long without revision. Aaaaaanyway, that aside the Plat ones are definitely my favourite run of Crye-alikes, glad you're liking them. Looking forward to selling my pair of regular Tigers on so I can grab a new pair in what is now the correct size. C-Diddy 1 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted February 19, 2023 Share Posted February 19, 2023 (edited) Two G&G high cap mags for the G(EC)36. They're very nicely made, and weren't too pricey at ~£25 each from Bullseye. That means I'm "skirmish-ready" with the G36* as I'll have 2 high caps = 800rds plus 2 mid caps. Which is nice. Also got the Cyma M14 scope mount. Here's some pain for me - it obviously will fit perfectly, but my aborted attempt to fit the cheapo Ali Express copy I bought a few months ago meant I've cut a bigger thread partway into the front bolt hole. Not big enough to accept the supplied bolt for that (it's a stupid half size, M5.5 I think). That means there's not much of the original thread left - and the Cyma bolt isn't quite long enough to reach it now. I've either got to buy the M5.5 tap and commit to the Ali's bolt, or find someone with a Helicoil set, so I can fit the Cyma one. Ho hum. * Assuming the gun shoots straight once it's in The Great Outdoors Edited February 19, 2023 by RostokMcSpoons Link to comment Share on other sites More sharing options...
Supporters Lozart Posted February 21, 2023 Supporters Share Posted February 21, 2023 New scope to replace the one I bent! Enid_Puceflange and Nick G 2 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted February 21, 2023 Supporters Share Posted February 21, 2023 First time I've read that sentence. Lozart 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted February 21, 2023 Supporters Share Posted February 21, 2023 2 minutes ago, TheFull9 said: First time I've read that sentence. I fell. Nick G, Hatchet, BigAl and 1 other 3 1 Link to comment Share on other sites More sharing options...
Badgerlicious Posted February 21, 2023 Share Posted February 21, 2023 (edited) may be an issue with my unit -hold for angry rant depending on reply- Edited February 21, 2023 by Badgerlicious Link to comment Share on other sites More sharing options...
Jaylordofwaargh Posted February 22, 2023 Share Posted February 22, 2023 On 15/02/2023 at 00:29, Enid_Puceflange said: Holy Warrior on the way The Spectre DR is just TOOO BIG for my 416 Nah, it's spot on Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
Jaylordofwaargh Posted February 22, 2023 Share Posted February 22, 2023 This almost generic ICS sports line number from @HuttArmouries to replace my other nearly generic CAA M4. Feels great, will still be a while before I can get it out to a skirmish. and now I have a replacement I can take the other one apart and "learn" if I am capable of fixing or I just post a bag of bits to an actual tech 😅 Link to comment Share on other sites More sharing options...
GothicGhost Posted February 23, 2023 Share Posted February 23, 2023 On 05/02/2023 at 21:56, RostokMcSpoons said: P90 pouch as a gas can holder? I like that, I like that a lot! Just made an order from Patrolbase, I'll see if they've got one I can add in. (Edit: out of stock, damnit) It'll save me buying mini-cans I can fit in my existing pouches Edit: Is the pouch this double P90 one? https://www.amazon.co.uk/Viper-P90-Mag-Pouch-V-Cam/dp/B00WX21DFO/ref=sr_1_1 That seems to have an internal divider - do you just cut it out, or will the can fit regardless? Yes you just have to cut the middle wall out most of the way so the gas can will fit easy Link to comment Share on other sites More sharing options...
CheeseToastie Posted February 24, 2023 Share Posted February 24, 2023 A&K M249 JustMark, Cocha and Akuma121 1 2 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 24, 2023 Share Posted February 24, 2023 On 15/02/2023 at 00:29, Enid_Puceflange said: Holy Warrior on the way The Spectre DR is just TOOO BIG for my 416 9 days from order to delivery just had a quick peek in the box Arrived just in time for a game this Sunday Akuma121 and JustMark 1 1 Link to comment Share on other sites More sharing options...
Fatboy40 Posted February 26, 2023 Share Posted February 26, 2023 On 24/02/2023 at 12:31, Enid_Puceflange said: 9 days from order to delivery just had a quick peek in the box Arrived just in time for a game this Sunday @Enid_Puceflange How mirrored is the front glass / how clear is it? (I desperately want a clearer Eotech clone... or a lottery win). Link to comment Share on other sites More sharing options...
Archer Posted February 26, 2023 Share Posted February 26, 2023 Four Western Arms 1911's , a shedload of spares and loads of mags. Happy Happy, Joy Joy BigAl and Mobius Strip 2 Link to comment Share on other sites More sharing options...
BigAl Posted February 27, 2023 Share Posted February 27, 2023 Archer. pics.? Link to comment Share on other sites More sharing options...
Archer Posted February 27, 2023 Share Posted February 27, 2023 2 hours ago, BigAl said: Archer. pics.? Al, As requested :-) Lozart and Nick G 2 Link to comment Share on other sites More sharing options...
BigStew Posted February 27, 2023 Share Posted February 27, 2023 Never thought I would buy anything from Nuprol but it fits all my guns that actually work (The M14 it was actually bought for has taken longer than the 14 to 16 days to turn up. hitting 21 days and not even a tracking no). not a fan of the egg crate foam any one give a recommendation for foam that can be cut to shape? Akuma121 and Nick G 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now