Reap Posted November 19, 2020 Share Posted November 19, 2020 On 16/11/2020 at 19:45, AlphaBear said: Naaaaah absolutely crap choice.... get yourself a Nuprol And get yourself over onto the MWS thread. That’s where we live Oh no! I suppose I better send it back then?? Oh wait, I’m outside the 14 day return policy.......looks like I’m stuck with this crap gun, what am I going to do? 🤣🤣🤣🤣 Link to comment Share on other sites More sharing options...
Guest Posted November 19, 2020 Share Posted November 19, 2020 A new red dot for the Vector Link to comment Share on other sites More sharing options...
Shamal Posted November 19, 2020 Share Posted November 19, 2020 18 minutes ago, rocketdogbert said: A new red dot for the Vector Unusual but nice looking. Looks like a solar panel on top 🤔 Link to comment Share on other sites More sharing options...
Guest Posted November 19, 2020 Share Posted November 19, 2020 53 minutes ago, Shamal said: Unusual but nice looking. Looks like a solar panel on top 🤔 Cheers, and yes, 50k hours battery life Link to comment Share on other sites More sharing options...
Barny Posted November 19, 2020 Share Posted November 19, 2020 Saw this on Taiwan gun and thought sod it i'll buy it to cheer myself up after breaking up with the gf...again! Diemaco 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted November 20, 2020 Share Posted November 20, 2020 Just bought a tanaka colt saa from japan. Its totally not an excuse for me to build and wear a cowboy gun belt at airsoft. Cromulon1994 1 Link to comment Share on other sites More sharing options...
Guest Posted November 20, 2020 Share Posted November 20, 2020 3 hours ago, HuttArmouries said: Just bought a tanaka colt saa from japan. Its totally not an excuse for me to build and wear a cowboy gun belt at airsoft. Don’t forget the Stetson and red one piece undies 👍🏻 Link to comment Share on other sites More sharing options...
Robert James Posted November 20, 2020 Share Posted November 20, 2020 Got this TM MP7, bought some new mags and new, nuprol foam. Getting a pistol next week, but ill grab a pistol case for that. Think it turned out OK. Hopefully my drone case is easier. Link to comment Share on other sites More sharing options...
Skara Posted November 23, 2020 Share Posted November 23, 2020 Reloading is so overrated, I just bought a G&G 1500bb drum mag for MP5s. Now I can magdump cheaters with my KA PDW Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted November 23, 2020 Share Posted November 23, 2020 1 hour ago, Skara said: Reloading is so overrated, I just bought a G&G 1500bb drum mag for MP5s. Now I can magdump cheaters with my KA PDW Think about getting the 2300 round M4 one for my Double Eagle Honey Badger 😆 Link to comment Share on other sites More sharing options...
Skara Posted November 23, 2020 Share Posted November 23, 2020 3 minutes ago, Cr0-Magnon said: Think about getting the 2300 round M4 one for my Double Eagle Honey Badger 😆 I have it. Works flawlessly, although it's super heavy when fully loaded (mind you, I have the manual winding only one because it's less shit that can go wrong in tournaments, the electric winding ones are even heavier because of the battery + electronics inside). Works best with short guns like your HB I do sometimes use it when I want to run light loadouts without chest rigs. Link to comment Share on other sites More sharing options...
DerDer Posted November 23, 2020 Share Posted November 23, 2020 Some longbow BBs in 0.30g weight. Have an AK that really didn't like the Devil blasters I was putting through it. Link to comment Share on other sites More sharing options...
Asomodai Posted November 24, 2020 Share Posted November 24, 2020 G&G F2000 ETU in black WITH the hunter scope. Link to comment Share on other sites More sharing options...
Popular Post HuttArmouries Posted November 24, 2020 Popular Post Share Posted November 24, 2020 Just bought an mp5k and an mp5 sliding stock. Always wanted to do this conversion since seeing this pic. Its an mp5k built off an mp5 reciever and that stock just looks so good on it. Gonna take a bit of work but the end result should be a nice little pdw. L3wisD, PopRocket123, Skara and 4 others 5 2 Link to comment Share on other sites More sharing options...
Asomodai Posted November 25, 2020 Share Posted November 25, 2020 5KU Zentico PT-1 Stock for E&L AK's. 5KU VS-24 Handguard. GeorgePlaysAirsoft 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted November 25, 2020 Share Posted November 25, 2020 Bought a few mags made by a company called dday. The build quality seems great though they are rather loose in the magwell. They seem to feed just fine and time will tell if they actually hold up. Link to comment Share on other sites More sharing options...
Skara Posted November 25, 2020 Share Posted November 25, 2020 ZCI 22tpa motor SHS 13:1 gears SHS 14t piston Some more Alpha Wire A bunch of small parts to replenish my stock of spare bits and bobs. All from our friend @ak2m4 Link to comment Share on other sites More sharing options...
alxndrhll Posted November 25, 2020 Share Posted November 25, 2020 3 hours ago, Asomodai said: 5KU Zentico PT-1 Stock for E&L AK's. I’ve never been overly ‘into’ conventional steel/wood AKs, but I’ve always had a soft spot for short AKs with a bunch of Zenitco tat thrown on them. It’s a build I’ve never got round to doing, but have been thinking about more and more of late. This image is not helping. Link to comment Share on other sites More sharing options...
Asomodai Posted November 25, 2020 Share Posted November 25, 2020 2 minutes ago, alxndrhll said: I’ve never been overly ‘into’ conventional steel/wood AKs, but I’ve always had a soft spot for short AKs with a bunch of Zenitco tat thrown on them. It’s a build I’ve never got round to doing, but have been thinking about more and more of late. This image is not helping. Aye. As I am planning an MVD/Omon loadout, tricked out Zenitco AKs are a must. Sadly for you I like my long bois! These parts are going on a full length 74n! Link to comment Share on other sites More sharing options...
alxndrhll Posted November 25, 2020 Share Posted November 25, 2020 6 minutes ago, Asomodai said: Aye. As I am planning an MVD/Omon loadout, tricked out Zenitco AKs are a must. Sadly for you I like my long bois! These parts are going on a full length 74n! Haha, I look forward to seeing it nevertheless! There’s just something about Zenitco parts that draws me in, irrelevant of what they’re on. The stumbling block any time I’ve seriously considered doing it is the base RIF. Seems a little backward to spend a lot on the base RIF and then replace half the things which lead to it costing so much in the first place. Add the fact I’ve struggled to find much information on what exact modifications are required to get parts which seem to have been made to fit LCTs, E&Ls and GHKs (‘high end’ as I understand it, I know VERY little about the AK platform in terms of airsoft) to fit on a Cyma and that tends to be the point the temptation dies out. Well, those and the fact I haven’t worked on an AEG in lord knows how long so I’d definitely end up breaking it. Link to comment Share on other sites More sharing options...
Asomodai Posted November 25, 2020 Share Posted November 25, 2020 14 minutes ago, alxndrhll said: Haha, I look forward to seeing it nevertheless! There’s just something about Zenitco parts that draws me in, irrelevant of what they’re on. The stumbling block any time I’ve seriously considered doing it is the base RIF. Seems a little backward to spend a lot on the base RIF and then replace half the things which lead to it costing so much in the first place. Add the fact I’ve struggled to find much information on what exact modifications are required to get parts which seem to have been made to fit LCTs, E&Ls and GHKs (‘high end’ as I understand it, I know VERY little about the AK platform in terms of airsoft) to fit on a Cyma and that tends to be the point the temptation dies out. Well, those and the fact I haven’t worked on an AEG in lord knows how long so I’d definitely end up breaking it. Tactical airsoft have an E&L Elak for just 190 quid. Proper blues steel. You need to have the E&l specific 5KU Zenitco stock, but everything else needs the normal amount of filing to get on. Plus you don't need to upgrade any of the E&L internals. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted November 25, 2020 Supporters Share Posted November 25, 2020 23 minutes ago, alxndrhll said: Haha, I look forward to seeing it nevertheless! There’s just something about Zenitco parts that draws me in, irrelevant of what they’re on. The stumbling block any time I’ve seriously considered doing it is the base RIF. Seems a little backward to spend a lot on the base RIF and then replace half the things which lead to it costing so much in the first place. Add the fact I’ve struggled to find much information on what exact modifications are required to get parts which seem to have been made to fit LCTs, E&Ls and GHKs (‘high end’ as I understand it, I know VERY little about the AK platform in terms of airsoft) to fit on a Cyma and that tends to be the point the temptation dies out. Well, those and the fact I haven’t worked on an AEG in lord knows how long so I’d definitely end up breaking it. the general rule is if it doesn't fit then make it fit. ak's tend to be a lot more hands on when it comes to this kind of modding than the likes of ar's. thing is most folks wanting the more premium ak's tend to want the nice blued reciever hence having to get the pricier guns to begin with. 10 minutes ago, Asomodai said: Tactical airsoft have an E&L Elak for just 190 quid. Proper blues steel. You need to have the E&l specific 5KU Zenitco stock, but everything else needs the normal amount of filing to get on. Plus you don't need to upgrade any of the E&L internals. the only thing to mention is it looks like the 710 is using a custom gas block? i considered one myself although ended up going classic with an akm. Link to comment Share on other sites More sharing options...
alxndrhll Posted November 25, 2020 Share Posted November 25, 2020 I must be behind on my loose understand of the general rule for AKs, is ‘Nyet. Rifle is fine.’ dying out? 😅 I guess I hadn’t really considered the receiver/finish of the receiver being worth the extra but that makes a lot of sense. I fear I’m straying in to territory of maybe finally actually ‘doing the thing’ in the not too distant future. This thread is so dangerous. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted November 25, 2020 Supporters Share Posted November 25, 2020 33 minutes ago, alxndrhll said: I must be behind on my loose understand of the general rule for AKs, is ‘Nyet. Rifle is fine.’ dying out? 😅 nah, it's still used by people too poor to afford zenitco (ie me ) i still view m4 stocks as heresy, but dragging an ak through the zenit catalogue can be good. tbh if money wasn't an object i'd probably be going big time into siderail optics, but there's not many decent airsoft repros of the more eclectic stuff. Link to comment Share on other sites More sharing options...
CrackCommandoUnit1972 Posted November 26, 2020 Share Posted November 26, 2020 A big one and a little one. Tackle 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now