RostokMcSpoons Posted August 5, 2022 Share Posted August 5, 2022 The Breakaway Coaster doohickies arrived from eBay. With a bit of dremelling I gouged a chunk out of the inside to accommodate the existing zoom lever hump... and I have to say this is an excellent "Extended zoom lever mod" for a mere £6. Video explaining the fitting and the dremel work... https://www.youtube.com/watch?v=4X4t6mK_Yz4 Lozart 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted August 5, 2022 Supporters Share Posted August 5, 2022 1 hour ago, RostokMcSpoons said: The Breakaway Coaster doohickies arrived from eBay. With a bit of dremelling I gouged a chunk out of the inside to accommodate the existing zoom lever hump... and I have to say this is an excellent "Extended zoom lever mod" for a mere £6. Video explaining the fitting and the dremel work... https://www.youtube.com/watch?v=4X4t6mK_Yz4 I've had a couple of those on my scopes for a while! Dead handy and cheap! Link to comment Share on other sites More sharing options...
concretesnail Posted August 13, 2022 Share Posted August 13, 2022 A new liner for one of the cases. Nick G, RobHedley and Skullchewer 3 Link to comment Share on other sites More sharing options...
Popular Post SSPKali Posted August 14, 2022 Popular Post Share Posted August 14, 2022 Raid modded my Helikon BDU shirt. Wrist adjuster and chest pocket buttons replaced with velcro. Lower pockets removed and large loop velcro patches added. These were then attached to the upper arms. Also bar tacked over a small rip. Quite a productive afternoon given how bleedin’ hot it was! Coyote brown velcro from ContactLeft (Ebay) and Gutterman thread (colour 208 - from Amazon) Tactical Pith Helmet, Jacob Wright, johnnyj and 3 others 2 1 3 Link to comment Share on other sites More sharing options...
Popular Post Speedbird_666 Posted August 17, 2022 Popular Post Share Posted August 17, 2022 Mk5 Thunderflash holder to go on the front of my chest rig. Velcro backed - it'll have a loop of shock cord to provide tension. Tactical Pith Helmet, RobHedley, SSPKali and 3 others 6 Link to comment Share on other sites More sharing options...
Popular Post Stevobeavo Posted August 22, 2022 Popular Post Share Posted August 22, 2022 decided to make my own gun case. It's not the neatest but it works. Bought a tool box from b&q, hardboard, pick and pluck foam and a few cans of plasti dip. I made it three layers with the bottom one glued to the base of the box. With the pistol layer I can pick the foam out for other attachments if needed and just plasti dip that section again to firm it up. All the layers also have foam under each piece of equipment. Lozart, BigBell1987, concretesnail and 7 others 5 5 Link to comment Share on other sites More sharing options...
Popular Post Alvin Posted September 9, 2022 Popular Post Share Posted September 9, 2022 Added some fans to my helmet. Beep boop. Will see how it goes. PopRocket123, Tactical Pith Helmet, Nick G and 3 others 5 1 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted September 10, 2022 Supporters Share Posted September 10, 2022 21 hours ago, Alvin said: Added some fans to my helmet Ooh, noise! I mean, nice! Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted September 10, 2022 Share Posted September 10, 2022 Knocked up a PC stand Buulders are in, plenty of useable off cuts and a router helps Really helps when changing pouches around etc Tactical Pith Helmet and Tackle 2 Link to comment Share on other sites More sharing options...
Popular Post Tactical Pith Helmet Posted September 10, 2022 Popular Post Share Posted September 10, 2022 24 minutes ago, Enid_Puceflange said: Knocked up a PC stand Buulders are in, plenty of useable off cuts and a router helps Really helps when changing pouches around etc You could crucify dwarves on that. Chev Chelios, Akuma121, Nick G and 3 others 6 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted September 10, 2022 Share Posted September 10, 2022 Just now, Tactical Pith Helmet said: You could crucify dwarves on that. Yeah! 😂 Might have to make a mk2 and adjust the height of the crossbar to make it slightly less religious, but more importantly actually lift my pc a couple of inches higher 👍 Tactical Pith Helmet 1 Link to comment Share on other sites More sharing options...
alxndrhll Posted September 11, 2022 Share Posted September 11, 2022 12 hours ago, Enid_Puceflange said: Yeah! 😂 Might have to make a mk2 and adjust the height of the crossbar to make it slightly less religious, but more importantly actually lift my pc a couple of inches higher 👍 Surely it's easier to just sling some additonal blocks under the 'feet' of it? 😂 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted September 11, 2022 Share Posted September 11, 2022 (edited) 1 hour ago, alxndrhll said: Surely it's easier to just sling some additonal blocks under the 'feet' of it? 😂 That won’t really do the job As the lowest part of the PC and the dangler pouch on the front are currently resting on them Edited September 11, 2022 by Enid_Puceflange Link to comment Share on other sites More sharing options...
Popular Post Clanktank Posted September 11, 2022 Popular Post Share Posted September 11, 2022 Some gear and shim holders for when the gearbox is in bits. Made from old bearings, brass hook stubs, and some wood offcuts. Can't have them lying around and getting mixed up. 😉 Akuma121, Tactical Pith Helmet, Khyber and 2 others 5 Link to comment Share on other sites More sharing options...
Popular Post Skullchewer Posted October 2, 2022 Popular Post Share Posted October 2, 2022 Got some Shadow Foam from Airsoft Anonymous. For the top layer of the extra large case I bought some velcro straps from Amazon, cut slots for them then glued the whole thing into the lid with a strong foam adhesive. I have a foam layer that sits in the middle when the case is shut. Decided to try something fancy for the other lid. The triskelion came out a bit wonky, but overall I'm very happy. JimFromHorsham, RostokMcSpoons, Enid_Puceflange and 2 others 5 Link to comment Share on other sites More sharing options...
concretesnail Posted October 2, 2022 Share Posted October 2, 2022 Love the cut cases Skullchewer 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted October 15, 2022 Share Posted October 15, 2022 Battery extender for KWA sliding stocks. Speedbird_666 1 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted October 15, 2022 Share Posted October 15, 2022 46 minutes ago, mightyjebus said: Battery extender for KWA sliding stocks. If I could make a suggestion - extend it all the way back into the butt-pad cavity so it butts up against the flat section at the back. It'll act as a stabiliser to help to reduce flex/wobble. Also gives you more battery/wiring space. Link to comment Share on other sites More sharing options...
mightyjebus Posted October 16, 2022 Share Posted October 16, 2022 8 hours ago, Speedbird_666 said: If I could make a suggestion - extend it all the way back into the butt-pad cavity so it butts up against the flat section at the back. It'll act as a stabiliser to help to reduce flex/wobble. Also gives you more battery/wiring space. not a bad idea. Link to comment Share on other sites More sharing options...
Nick G Posted October 16, 2022 Share Posted October 16, 2022 (edited) A build in progress. Transplanting an AUG hop unit into my S&T M249. I've had feeding issues and low power in it right from day one so decided to try this before I retire and replace it. More work to do yet, but as of today I've got it feeding and the power level is up. I fitted an adjustable nozzle which I'll need to dial in fully yet. Planning to give it a shake down at the next game day to see how it performs. Edited October 16, 2022 by Nick G Tackle and Tactical Pith Helmet 2 Link to comment Share on other sites More sharing options...
Nick G Posted October 17, 2022 Share Posted October 17, 2022 BB feed now in place, by opting for a side feed I can use my existing Classic Army box mag, which handily has a quick release for the feed. Sits behind the bullet belt nicely. Tried it today in a mate's orchard and it feeds fine and was hopping .25's with plenty of adjustment stil available. Now it's feeding I'll play with the nozzle and find the longest length that will still feed. At the moment it's set at a conservative length. It's getting there. Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 20, 2022 Share Posted October 20, 2022 Received my free sample of ShadowFoam yesterday Just enough to try out in one of my pistol cases Decent stuff, easy to work with, looks tidier than the pick n pluck foam that I’ve tried before, that seems to easily misshape without much effort RostokMcSpoons and PopRocket123 2 Link to comment Share on other sites More sharing options...
Skullchewer Posted October 22, 2022 Share Posted October 22, 2022 Cut the Shadowfoam for my MP5K, and my "very favourite gun". All my cases now have Shadowfoam, the MP5K has room for a friend then I'll do something in the lid. PopRocket123, RostokMcSpoons and Rogerborg 1 2 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted October 24, 2022 Supporters Share Posted October 24, 2022 On 22/10/2022 at 21:59, Skullchewer said: Cut the Shadowfoam for my MP5K, and my "very favourite gun". All my cases now have Shadowfoam, the MP5K has room for a friend then I'll do something in the lid. Skullchewer, Rogerborg and RostokMcSpoons 2 1 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted October 24, 2022 Share Posted October 24, 2022 Contrast that sterling effort from Mr Chewer with me rocking up at Special Ops with one of those big blue plastic Ikea bags with three or four guns poking out, and a rucksack full of mags 'n' shit ;D Skullchewer, Lozart and Rogerborg 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now