Gun picture thread

[MILITATED]

36 minutes ago, SBoardley said:

Which bolt are you using in there?

Where did you get that receiver? 

C&C Tac short bolt. They're a bit of a pain to get working & C&C Tac themselves told me each bolt should be considered a project, rather than a drop in. But they're cool once they do work!

 

Dytac F4 receiver. I got it from one of the Hong Kong stores, probably JKArmy or WGC, would need to check. They were limited edition though and haven't been back in stock since I got mine. AsiaAirsoft's site claims to have one, but it is a stock tracking error unfortunately & they're terrible with refunds. I've been waiting for about a month for them to refund me...

 

Dytac do make SLR receivers too, which seem to be frequently restocked, so that could be an option. Let me know if you have any other questions & I'll try help out. Cheers!

Edited April 8, 2023 by MILITATED

[BigStew]

John Wick-ish set up 

[Davegolf]

19 hours ago, MILITATED said:

Strike Industries TM MWS completed(?)

Might experiment with a small red dot or something, but I can't see it changing much more than that. Started in March last year! Time flies. Love how it turned out.

 

To match, also built a Strike Industries TM G17 (decided to not go with the EMG/G&P prebuilt one in the end). Waiting on a nicer red dot to arrive, but God knows when that will be.

 

Make quite a nice pair!

The MWS came out nice!

 

Is the G17 a Gen 3 or 4 base?

[Skullchewer]

On 08/04/2023 at 12:22, MILITATED said:

Strike Industries TM MWS completed(?)

Might experiment with a small red dot or something, but I can't see it changing much more than that. Started in March last year! Time flies. Love how it turned out.

 

To match, also built a Strike Industries TM G17 (decided to not go with the EMG/G&P prebuilt one in the end). Waiting on a nicer red dot to arrive, but God knows when that will be.

 

Make quite a nice pair!

 Dear Zod, man, those are absolutely BEAUTIFUL! Good work!

[Enid_Puceflange]

Recent (last month) arrival

Still trying to figure out my favourite set up for it

 

[JimFromHorsham]

Not movie accurate of course but fun all the same  

 

[emilianoksa]

Very nice.

 

Is that a TM 1st generation model or the later one?

[JimFromHorsham]

4 hours ago, emilianoksa said:

Very nice.

 

Is that a TM 1st generation model or the later one?

latest m92f military in a Guarder kit 😎👍🏼

[emilianoksa]

Thanks Jim.

 

How hard was it to fit?

[JimFromHorsham]

6 minutes ago, emilianoksa said:

Thanks Jim.

 

How hard was it to fit?

not that difficult at all , clean workspace , a little patience and decent tools

[mightyjebus]

Something old, something new.

Just picked up the ZP-19 from these forums and only had to add the suppressor as it came with everything else. The other AK is a Kreb's Custom AK made by Classic Army quite a few years ago. It's full Kreb trade marked and full steel.

Edited April 13, 2023 by mightyjebus

[theSwede]

My first build in ages. And yes, it’s a boring build. But I do love a clean, tacticool glock.

Based on a TM G17 gen3.

 

Upper:

Guarder custom alu slide

UAC Ultra lightweight BBU V.2

DP 135% nozzle return spring

Guarder steel threaded outerbarrel

108,5mm Laylax powerbarrel 6.00mm

AIP Steel recoil guide rod 

 

Lower:

Guarder new gen frame

Guarder steel slide lock and extended slide stop

Guarder series number tag set

GM stainless steel pins

PTS Zev extended mag release

Cowcow 140% hammer spring

Cowcow Tactical G trigger

TM magwell

[ghostwalker]

New long gun 

[Superkoochy]

My very recently purchased M18 with clone X300U, M17 extended mag, RMR and Talon Grips (I’ve also ordered some Talon Material to make the cut outs in the mag match the grip) 

[Lozart]

4 minutes ago, Superkoochy said:

My very recently purchased M18 with clone X300U, M17 extended mag, RMR and Talon Grips (I’ve also ordered some Talon Material to make the cut outs in the mag match the grip) 

 

I'd be very interested to hear how it performs.

[Skullchewer]

6 hours ago, ghostwalker said:

New long gun 

Very pretty.

[Regx]

Not fully complete yet. But almost there. My 14.5 

[Pupa2794]

Scratch build Maynard rifle built from steel. Fires madbull shells. 

 

Real thing was a civil war breech loaded rifle used by the confederacy. 

 

Heat and oil blued. 

[TipsyDiver]

Finally got my first proper gun ( other than glock converted with roni kit ^^ ) 

 

HK33 by LCT EBB

Steel throughout, heavy, chunky, you literally do not need any ammo to kill with it xD, however right out of the box was rather disappointing so I got some parts and sat down on it this weekend.

 

Changed parts:

Hopup chamber maxx models 

Piston head double oring maxx models

Cylinder head double oring maxx models 

Nozzle double oring maxx models

6.02 590mm barrel maple leaf

Rubber Super macaroon 60* maple leaf

M120 non-linear spring prometheus

 

I am running it with gate aster v2 SE and 11.1 LiPo 3 cell.

 

It works way better than before, all fits well but I am still not happy with fps, as I am using it as DMR I want as close to 450 with .02 as possible. Currently 350 with .28 :((((

 

I am waiting for stainless steel cylinder from maxx and warhead brushless motor and will experiment with PDI spring 260%.

 

Any ideas how to increase range and accuracy are very, very welcomed

 

 

 

 

 

 

 

[Pupa2794]

Below is a WIP Lancaster 577 howdah for cassieopia shells. Though it may end up as a blank firer. 

[sp00n]

On 08/04/2023 at 12:22, MILITATED said:

Strike Industries TM MWS completed(?)

Might experiment with a small red dot or something, but I can't see it changing much more than that. Started in March last year! Time flies. Love how it turned out.

 

To match, also built a Strike Industries TM G17 (decided to not go with the EMG/G&P prebuilt one in the end). Waiting on a nicer red dot to arrive, but God knows when that will be.

 

Make quite a nice pair!

dam that pistol rocks, would love to know the full build parts etc 😍

[MILITATED]

On 16/04/2023 at 20:29, sp00n said:

dam that pistol rocks, would love to know the full build parts etc 😍

Thanks! It is a TM G17 Gen 3 base, currently stock internals.

- GKTactical ARK 17 slide for TM G17

- EMG Strike Industries P80 lower frame for TM G17 Gen 3

- JDG Floyds magazine extension pad (increases gas/bb capacity)

- Aliexpress special SI Mass Driver compensator and recoil rod/stronger spring (attaches to the recoil rod like the real one, whereas the EMG/G&P prebuilt is attached to the barrel threads)

- Crappy red dot that has now been replaced

- Forgot the trigger but pretty generic

- SOTAC(?) clone Inforce APL 

 

On 09/04/2023 at 08:00, Davegolf said:

The MWS came out nice!

 

Is the G17 a Gen 3 or 4 base?

Thank you! G17 Gen 3 as a base. Just got a Dytac SLR MWS kit too, but I am also feeling for a normal MWS, so not sure if I'll keep it

 

On 11/04/2023 at 12:18, Skullchewer said:

 Dear Zod, man, those are absolutely BEAUTIFUL! Good work!

Cheers, appreciate it 😎

Edited April 17, 2023 by MILITATED

[Jack91]

My Systema PTW M4, im wanting to change the RIS to an M-lok rail (9inch) and get rid of the front sight post. 

 

[C-Diddy]

11 minutes ago, Jack91 said:

My Systema PTW M4, im wanting to change the RIS to an M-lok rail (9inch) and get rid of the front sight post. 

 

Take a look at the HAO rails. Superb.

[Schnitz]

4 kocks, the 4th one being the kock behind the camera 

 

Edited April 18, 2023 by Schnitz