Gun picture thread

[Wavey_Gravey]

Nice one, wondered if they where gen parts or Ali express specials.

 

I recognise that profile picture on your YouTube from a while back on some older forums, glad to see your back into the sport again! Still making beautiful pointy things?

[JimFromHorsham]

1 minute ago, Wavey_Gravey said:

Nice one, wondered if they where gen parts or Ali express specials.

 

I recognise that profile picture on your YouTube from a while back on some older forums, glad to see your back into the sport again! Still making beautiful pointy things?

The ACRO itself popped up at a good price so it was a a very indulgent treat but these things seem to hold their value well so if the time came to move it on I don’t foresee a big knock . 
truth be told I never really left the collecting /tinkering/hoarding side of airsoft , just the playing but some old and new contacts are turning the thumbscrews so I may make a guest appearance at some point 🤪

 

it’s been a busy couple of years with a few curve balls but knife making is very much back on the menu very soon  

 

and thank you ! 

[MILITATED]

~3 months, £56 customs fee & a few Parcelforce complications later...

 

Volante 6061 T6 aluminium slide, barrel and RMR housing for TM FNX! 

Will post pics once fitted. 

Could have bought 2 brand new TM FNXs with how much that ended up costing 🤕

 

 

Edited June 10, 2022 by MILITATED

[JimFromHorsham]

First AEG in a lonnggggg time … like ages and this could be the gateway drug that I really don’t need in my life

 

Specna Arms Edge 2.0 , this was a basic Rock River Arms M4A1 (plastic foregrip / carry handle ) , wanted to keep it clean and not overtly MIL like a lot of my GBBR builds .

 

Externally added a HAO 13.5 MK16 rail & KAC style flip ups  , VLTOR style gas block & gas tube .AG Surefire FH , Magpul CTR stock ,Bushnell AR.223 1-4 scope &  Aero precision mount.

inside a Prometheus tightbore & purple rubber / bucking combo . Using the stock hop unit and it seems to be flinging .28’s quite well.

 

Edited June 11, 2022 by JimFromHorsham

[Jack91]

My krytac Mk2 SPR with surefire clone, trijicon MRO, Stubby PTS grip, genuine Magpul sights and 1 point sling, along with my WE Glock 33 advanced. 

Edited June 12, 2022 by Jack91

[Whytey]

On 01/06/2022 at 14:12, Hellfish said:

My Specna Arms and my in game GAT on Ghost Recon Breakpoint : Not a 100% faithful reproduction (BUIS and Adaptive Magwell are still in the post) but its the nearest I could get with the weapon and accesory options available in game 😉🤙🏻

Very nice

[Lozart]

On 01/06/2022 at 14:12, Hellfish said:

My Specna Arms and my in game GAT on Ghost Recon Breakpoint : Not a 100% faithful reproduction (BUIS and Adaptive Magwell are still in the post) but its the nearest I could get with the weapon and accesory options available in game 😉🤙🏻

 

If you're up for it, Den Trinity has the CASV handguard kit in stock and on offer: Item number COK150BBKX https://www.dentrinityshop.com/den_special.jsp?pg=7&rpp=50 (you may have to scroll down a bit to see it, their website is shite).

 

[Impulse]

AAP to Ruger project is going well. Lower receiver arrived and that's the first pistol lower I've had to completely strip out (as the Ruger lower comes empty, you have to take all the AAP-01 bits out of the stock lower and put them into the Ruger lower apart from the safety and the mag release button).

 

Still want to get some real wood grips, a metal upper (but they're pricey), a new inner barrel as the stock one is short and some different rear sights, but it's now very much usable as a Ruger.

 

New Namsoft sidearm acquired, and this one is more reliable and shoots better than my 1911. VC sniper now has a period-appropriate assassin pistol 

 

[Hellfish]

Specna Arms SA-06 Core with some external bells and whistles atattched to make it look all pretty 😍 

[alxndrhll]

The full NGRS line up, the L119 needs some firming up and a once over internally but externally happy. Super pleased with the longer modern upper, nice to have an AR setup where an LPVO doesn’t look out of place.

 

[Davegolf]

Can for the long gun? 😁

 

 

[alxndrhll]

8 hours ago, Davegolf said:

Can for the long gun? 😁

 

 

I’ve completely gone off the look of cans of late, with the L119 being an exception because it’s somewhat of a defining part of it. The muzzle devices on the short and long both accept the same SF qd cans though, so should the feeling take me I have the option. 
 

I’ve got the warden, RC2 mini and RC2 so all of the options open as/when the feeling takes me.

[Terrywristt]

When the AAP-01 first came out, though the price/performance was really good.  I really couldn't get behind the aesthetics..  So when the CTM ruger kit came out.  I had to get it.

 

I think the only thing I will change in the future is the trigger and the bolt.. But for now I'm pretty chuffed with how it looks!

 

[Druid799]

15 hours ago, alxndrhll said:

The full NGRS line up, the L119 needs some firming up and a once over internally but externally happy. Super pleased with the longer modern upper, nice to have an AR setup where an LPVO doesn’t look out of place.

 

An old school L119 does just look like the mutts nutt’s to me 

this is my TM recoil dressed as one , if I do stick a can on it I’m lucky enough to have a ‘Perr Mike’ one from yrs ago .

[Dan Robinson]

For shits and giggles. 

 

Technically the two hanging up are my sons. 

 

[alxndrhll]

7 hours ago, Druid799 said:

An old school L119 does just look like the mutts nutt’s to me 

this is my TM recoil dressed as one , if I do stick a can on it I’m lucky enough to have a ‘Perr Mike’ one from yrs ago .

 

Aye, a Perr Mike is what I've got on mine. Trades are present and correct as well, and the barrel has had the 0.3" removed to make it the correct 10" (not that it's something I'd actively go out and do myself but I welcome them being there). All it's missing is a few bits of machining on the top rail and it's pretty much there... whether that's something I'll ever get around to doing is another question entirely.

[Druid799]

1 hour ago, alxndrhll said:

 

Aye, a Perr Mike is what I've got on mine.

I had one from his first run of them as I knew Mike ‘back in the day’ he was a really nice guy , was a loose bunch of us who used to meet up every now and again at places like the ‘Mall’ or UCAP tunnels and just have a bloody good day S’ofting .

Happy days .

[johnnyj]

Before and after of my current pet project. Still lots to do but it's coming along.

Was meant to just be a light restoration by removing the old camo job but added - angry gun surefire set , kac rail with 1-15 numbers , hao Castle nut , warlord sling plate and new stock as the original was fubar.

 

 

[Enid_Puceflange]

Fitted an M203 to my GHK cos it wasn’t heavy enough already 🤦🏻‍♂️
 

[Davegolf]

Got reunited with my Remington earlier this year, now finished the overhaul and upgrades.

MOE K2 flush fitted, safety delete, MESA shot shell holder, Romeo 3 optic, all new gas seals - has held pressure for a month now 😎

 

 

[Alimcd]

@Impulse and @Terrywristt a good friend of mine is going to be recasting some Ruger grip medallions if you want to go the whole hog doing the MK4 Competition look. He’s doing some custom wooden grips for mine at the moment and then Jack at Airsoft Engraver will be copying the proper trades  

 

Since getting Covid, I have t managed to get in to work to have a look at how mine looks at the moment, just had the upper and trigger cerakoted in graphite black

[Cain-c-123]

Mtw build is finally finished. But Now I’m thinking it needs a longer rail? What do you good people think. 

Edited June 20, 2022 by Cain-c-123

[SerialNoodle]

 
My mini PP2K project is complete, time to focus on this bad boy! - 9mm conversion possibly coming soon :0 (If it actually works).  What else should be added to her?

[Davegolf]

@SerialNoodle what is that rifle? Looks epic! Isn’t it already 9mm?

[Khyber]

On 20/06/2022 at 23:33, Cain-c-123 said:

But Now I’m thinking it needs a longer rail? 
 

I think you might be right. The rifle looks really nice but proportionally the rail is a bit short for the optic.