Leaderboard

Anyone needing their "street Sweeped?"

You're just jealous that I can fit through those pissy little Victorian loft hatches to get to the header tank. 😜

I know the mk23 isn’t to everyone’s taste, but still a bit harsh

I run a hard case when visiting sites, as I take a couple of different rifs, I haven’t bothered cutting foam to allow one case to be used for several pewpews I got a 5.11 Cams which I put Shadow Foam into Used it once Its just too damn big 😂

I've got some lead soldiers in the loft. The kids used to play with them when they were babies. 😉

I know... as I typed it I looked at my pews and thought I don't need this big a collection either, the difference in my mind is... I can look at & enjoy my pews but a gun case is really a thing to carry them 10 feet from my front door to the boot of my car, I'll end up getting one eventually but it's low on my list of airsoft priorities (for now). One of these would be nice...

Oh do piss off 🤪

It was horrible getting into your boxer shorts elastic. Then you'd sit in the van and grind it into your waist skin. Made even worse when you got back in the seat the next morning, only to get the remnants pushed back into your skin again. Ggggrrrrrr

Ooh, now that is nice. I'm sort of lucky that i only have 4 pews, for now, and dont really have anywhere to keep them in the house so putting thw3m in cases where i can then stash them out of the way makes sense. I do, as of Saturday, have a spare bedroom so I think that might become 'The Gun Room' with them on display. Then i can add more. 😁

Haha it never fails to be funny. Hammocks and people getting hit in the balls with balls lol. I'm easily amused though.🙂

I'd be better off using a 40yr old sleeping mat, I'd end up on the deck anyway.

This is my Peli Case, Shadow Foam inside and will carry 2 rifles and my pistol quite easily.

Magical leopluradon!

What was the saying about the organ grinder and his monkey? I itch at the thought of a loft nowadays 😃

What is this gibberish? Speak English.

I don't see the reasoning behind your logic! What's need got to do with it? This is Airsoft, it's ALL about want!

Surely they should be "industrial", "medieval", "furure" and "aztec"? Especially if the head marshal is a bald thespian with eccentric taste in clothing

Knobitch makes one. https://eu.novritsch.com/product/portable-gas-container/

Says the guy who wants a Scotch Pie posted 469 miles

I bet they sucked all that lovely lead based paint off them too 😂

Hi all, ended up going into my local shop and have purchased a Tm desert warrior, used it on a skirmish on Sunday and I’m happy with it ! Only slight drawback is it’s only doing 2/3rds of a magazine of bb’s on a gas fill, any advice on that or just grab another mag ? As it’s a bit tedious going back to the safe zone to refill between games. I now realise why people get the hi capa but I really like the colours and design of this one !! thanks for all your help

Ill be rereading the display your guns thread for some inspiration.

I highly recommend grid mesh for your gun wall

Yeah... I ate them. You're lucky then. 😜 You need immediate hospital attention dude. That's never right. 😂😂

A smear of silicon grease can do wonders there. 1.3J from an M100 and a stock (but stretched-and-greased) CYMA gearbox and nozzle. Yes, quivering on the edge of a Section 5. The difference between nearly sealed and really sealed is remarkable.

Just FYI 250mm back in stock right after I was complaining here https://www.empireairsoft.co.uk/maple-leaf-250-gbb-crazy-jet.html If anyone interested

A business near me (non airsoft, furniture), has a separate website for their returns or slightly damaged stuff, where the explicitly state items purchased there are non returnable & you should be prepared for possible small issues with items, but in fairness the price are reduced massively, maybe 25% of the original rrp or even less. My granddaughter needed a bigger bed, & they were advertising fancy sleigh bed returns for about 10% of the rrp, I popped in to their warehouse to pick one up, the guy brought 3 big unopened boxes out, BRAND NEW, never touched perfect condition, for 25 quid, result😃 My work here is done🤪

I test all the batteries I buy and return the crap ones. I don't worry about capacity if the IR is low. Give and take...

Air seal as stock on many guns is pretty bad. Just a case of eliminating it step by step. Piston head to cylinder, cylinder to cylinder head, cylinder head to air nozzle (always bad with those plastic ones!) and air nozzle to hop up rubber. With a good air seal I have got 1.05J from an M90 spring

I tend to stick to Gunman filmsim or milsim type events BUT... I know who's going, and they're a chill lot. Any amateur RSM attempts are squished and the culprits either learn to behave or tend to drift away. They're great fun with the right people.

Bought off here, arrived today, modelled by me to show @sofieb 😁 Oh, it's a Warrior Elite 901.

I Ordered replacements off Ares.

Esstac kiwi’s tall or mid rise. Excellent retention. If you are using bungied pouches, especially with heavier mags, the bungie needs to be tight enough that you have to positively pull it to get the mag out. If you are staying with the original pouches you can increase the friction by adding grip tape to the mag.

they seem to be OOS everywhere, took me ages to track down a 370mm crazy jet barrel for my kc02 build. I expect a big restock soon

Maybe an eotech clone or T1 type. I don't think you need to spend a lot really cause they all do a similar job on an aeg. Gbbr need a better quality to stand a bit of recoil. I've only got cheapish rds and holosights from off the forum and once they are adjusted with the help of a boresighter or adjusted to where your shots are hitting then they should be fine. Take a look at the classifieds🙂

Wolf armouries is a great example, not only did they have a shit eating attitude, I remember a young member on another forum contacting me for advice, long time ago pre vcra, explaining how he'd put a pistol in for repair & when he went to pick it up he was told "you've already collected it", his response was "no I haven't", & Wolf refused to accept they had given it to the wrong person, or alternatively one of the arsehole staff had lifted it ?

As I've posted before it never ceases to amaze me how so many airsofters are happy to be bent over and shafted by shops with terrible customer service

Multiple uses 🤣 Note: "External use only" so no good for cleaning inner barrels 😄

If that's the case. Oh TM Gas SPAS 12, Walther P99, PPK and an NRGS G3 and Gaili pronto

Haven’t done any for airsoft , stuff changes way too quick in my hands 😂 couple of my keeper air rifles I have though 😎

Second this. I’ve previously had to stick to MICH type helmets and cut the pads in half. I did manage to find some off the market thinner than usual pads that worked with a fast helmet for me before but having recently done exactly as above I can confirm it’s the best fitting and most comfortable option I’ve tried.

My loadout from Sundays game, that @Skullcheweralready posted about in "how did your airsoft day go?". It's subtle, but you might be able to make out my favourite outfit colour. Not shown: 2 radios on my back as I was squadleader. Also not shown: me getting a headache from having to decypher what two different channels are trying to tell me at the same time. 😂

A couple of shotguns.

Added the peq15 box ad the acog on an aluminium riser, to see over the top of thee peq. So just some pics because I like my new toy.

I use to run a site shop and the fastest way I found was just to get the buyer to hold different guns , what suits one player another will hate. I have large hands but I love compacts with full size grips ( Xdmc, hi-capa 4.3 , g19 etc ) If you have a main store close or even a site shop pay them a visit and handle all the main models of pistol( don't rack them.. they can get annoyed lol ) find a model you like in the hand and then look for the best brand of it.

Magpul’d the Apache , Magache? 🤷🏼‍♂️