Jump to content

Load-Out / Loadout Picture topic


Nutster

Recommended Posts

Rocking the KSG with the Mag Adapter in the daylight for the first time. Nice to actually see where the bbs go for a change! Had bags of fun with this.

 

All KombatUK BTP Black kit. 

20190720_160546~3.jpg

Link to comment
Share on other sites

  • Supporters

Kit looks ace my friend (bar the mag adapter abomination!) but why does your head look photoshopped on ! 😳😂😂😂

Link to comment
Share on other sites

  • Moderators
15 minutes ago, Druid799 said:

Kit looks ace my friend (bar the mag adapter abomination!) but why does your head look photoshopped on ! 😳😂😂😂

lol I thought that, reminded me of someone off the Telly.

 

one of these is a comedian, the others just having a laugh 😏

 

IMG_4502.JPG

IMG_4503.JPG

Link to comment
Share on other sites

44 minutes ago, Druid799 said:

Kit looks ace my friend (bar the mag adapter abomination!) but why does your head look photoshopped on ! 😳😂😂😂

I have a big head in proportion to the rest of my body. THANKS IM CRYING NOW 😞

Link to comment
Share on other sites

9AdYTbP.jpg

 

t6WElYX.jpg

 

NwCKD4E.jpg

 

q5ZznFJ.jpg

 

uyuhyaS.jpg

 

Put all my gear on and did some target practice today. I was barely moving but the heatwave right now made me sweat buckets. Hydration pouch on the back was a solid buy in this weather. Only thing missing from my kit here is the helmet cover and wiring/PTT for the headset/radio.

 

Some shooting.

 

Link to comment
Share on other sites

Haha. I do hear some back doors opening and closing as people come out to see what the noise is when I start, but I'm never out there very long and keep it to reasonable hours.

 

 

Link to comment
Share on other sites

5 minutes ago, SgtTalbert said:

 

How many times you lost that pistol?

 

The strap isn't on it in most of the pics because I was out there shooting for about 2 hours and it's a pain to clip the button on the strap back on, I might get a tailor to modify it so it has a simple velcro strap, but it fits pretty snug in there. Problem is finding good left handed holsters.

Link to comment
Share on other sites

3 minutes ago, jcheeseright said:

Jesus that gun sounds like it's about to drop dead.  

 

If it were a racehorse, I would shoot it. 

 

They don't have to last long because the user normally is getting eaten by a alien 

Link to comment
Share on other sites

30 minutes ago, jcheeseright said:

Jesus that gun sounds like it's about to drop dead.  

 

If it were a racehorse, I would shoot it. 

 

The battery was dying, I had a cheap one in it and it doesn't last very long. With a nuprol in it it's nice.

Link to comment
Share on other sites

  • Supporters

Kits looking really good mate it just ‘clicks’ with the pulse rifle 👍

But (not aimed at you but at ALL posters) me I’ve alway found my self laughing at action man pictures or vids shot in the house ! Very off putting when when trying not to laugh and critique someone’s kit at the same time ! 😂 

Link to comment
Share on other sites

4 hours ago, Druid799 said:

Kits looking really good mate it just ‘clicks’ with the pulse rifle 👍

But (not aimed at you but at ALL posters) me I’ve alway found my self laughing at action man pictures or vids shot in the house ! Very off putting when when trying not to laugh and critique someone’s kit at the same time ! 😂 

 

Thanks I suppose it does kind of match the rest, wasn't really intentional as the M41A was meant to just be a collectible / fun thing, but with my VFC SCAR-H stuck in the US for at least a month I guess I'll see how this thing really performs during games. Unfortunately Royal Mail lost my tracked P226 X-Five 6mm return which was going to be my sidearm so I've also got a 6mm 1911 with the SCAR  I'm waiting on. The one in the pics is a 4.5mm.

 

I hope 3x 220rd mags for the PR is enough - they're only £10 though so might get a couple more anyway.

Link to comment
Share on other sites

Added a cover to my helm and tidied it up, think it's pretty much finished aside from wanting to get a TMC headset that you can swivel back from the rear rails, then I can get my light on the straight rail.

 

qUpUUXu.jpg

 

https://imgur.com/a/BBYItqx

 

Going to add some mesh behind the plastic mouthguard area because I don't trust the plastic and value my mouth. Got some mesh, can cut it to size, what's a good way to glue it inside to the plastic? just something like gorilla glue?

Link to comment
Share on other sites

6 hours ago, paradoxum said:

Added a cover to my helm and tidied it up, think it's pretty much finished aside from wanting to get a TMC headset that you can swivel back from the rear rails, then I can get my light on the straight rail.

 

qUpUUXu.jpg

 

https://imgur.com/a/BBYItqx

 

Going to add some mesh behind the plastic mouthguard area because I don't trust the plastic and value my mouth. Got some mesh, can cut it to size, what's a good way to glue it inside to the plastic? just something like gorilla glue?

I use hot glue for mesh. Not the prettiest but gives plenty of purchase on a material that doesn't have a lot of surface area. Also you can remove it fairly easily with just a bit of heat

Link to comment
Share on other sites

3 minutes ago, PopRocket123 said:

I use hot glue for mesh. Not the prettiest but gives plenty of purchase on a material that doesn't have a lot of surface area. Also you can remove it fairly easily with just a bit of heat

Ah good idea. Got a glue gun. Thanks

Link to comment
Share on other sites

  • Supporters

To be honest mate unless you regularly play with steel bbs and guns running at a gazillion FPS on a regular occasion I don’t see even the slightest chance of a BB punching through the plastic mesh AND still having enough energy to do even a hint of damage to ya gob ! 

Link to comment
Share on other sites

Guest DrAlexanderTobacco

Those grills on the front mask look really flimsy, if you can bend one/push one in with your hand easily then I could see a burst causing enough damage to be dangerous.

Link to comment
Share on other sites

14 minutes ago, DrAlexanderTobacco said:

Those grills on the front mask look really flimsy, if you can bend one/push one in with your hand easily then I could see a burst causing enough damage to be dangerous.

 

Yeah they aren't super flimsy but I can easily see a few hits weakening it, then next time goes straight through or something. Just not worth the risk when I can glue gun some wire mesh on the inside. There's plenty of space.

 

ZvSt4L3.jpg

 

Even rotates to open up for drinking through which is handy.

 

yqEAdI7.jpg

Link to comment
Share on other sites

Summer loadout for when I really can't be assed with the plate carriers weight/warmth. Got a few utility pouches for my misc bits n bobs on the right, double layer mags on the left, everything else in the backpack.

Also got given the new codename Bush Whacker because of it

jzIG26Hc.jpeg

W3CZdlsA.jpeg

Link to comment
Share on other sites

On 31/07/2019 at 16:00, XanderShadow said:

Summer loadout for when I really can't be assed with the plate carriers weight/warmth. Got a few utility pouches for my misc bits n bobs on the right, double layer mags on the left, everything else in the backpack.

Also got given the new codename Bush Whacker because of it

jzIG26Hc.jpeg

W3CZdlsA.jpeg

Lightweight and functional, me likey!!

Link to comment
Share on other sites

Warm one today, really need to sort out a lighter loadout :

 

 

IMG-20190804-WA0007.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...