Jump to content

The 'What have you just bought' Thread


Cameron364

Recommended Posts

4 hours ago, Impulse said:

 

Fortunately the "only orders over £135" for the UK tends to push me away, but before that I would agree with you. Bought so much from Taiwangun in the past :D 

Put a order request Into patrolbase to order stuff from their site. Takes 4-6 weeks as I think they do a monthly request order to them. 

 

I've just had a few bits turn up today from doing this. 

Edited by Stevobeavo
Link to comment
Share on other sites

Mag adapters and mp5 mags for my DE UTR45 turned up today. 

 

IMG_20230210_201915.thumb.jpg.fffa5c51fca5f08ea571410eea8eeff7.jpgIMG_20230210_202622.thumb.jpg.c73e75cd531d9992f7405aef350f93d2.jpg

IMG_20230210_202611.thumb.jpg.6f091ce05709e330251fc9611dd954e4.jpg

 

Also a Daniel defense handguard I got off here turned up. Seems to be a insert in the barrel nut to make it narrower so doesn't fit over my outer barrel., So I'll take it it into work and see if it presses out 

 

IMG_20230210_232213.thumb.jpg.20579bc925f615cd28649ce03161e53f.jpgIMG_20230211_000245.thumb.jpg.7d2796b6afd6ccbd1ca64435a3777561.jpgIMG_20230211_000329.thumb.jpg.3dd1e2b69575cac72333a85d85e38747.jpg

Edited by Stevobeavo
Link to comment
Share on other sites

  • Supporters
10 hours ago, Speedbird_666 said:

 

Lovely gun - but that Red Dot is gopping.

 

 


It’s quite nice to use though …. It’s the mount that dot is on that’s the true rare thing

Link to comment
Share on other sites

13 hours ago, Stevobeavo said:

Mag adapters and mp5 mags for my DE UTR45 turned up today.

 

Those mags look great in the UTR45. It was the chonky mags that put me off the gun, but MP5 mags are much more practical.

 

 

 

 

Link to comment
Share on other sites

My Sotac EXPS3 sight has turned up turned up (late... the shop owner was on hols, and then Snail Mail lived up to its name too, it was sent on Friday)
£55 from eBay.   

400767191_EXPS3Composite.thumb.jpg.ab91976bf6074c08412d9dec72cff7d2.jpg

 

Maybe I'll do a mini-review it in the thread where I asked which one to buy (and then bought this in a hurry), but the TL;DR version is the attractive reticle is nice and bright - but the brightness adjusters work in very fine increments (too fine?), the whole thing feels well built, the quick-release mount is good, and parallax is perfectly alright (i.e. horrible at absolute point-blank, a very few centimetres at 6-7m (more vertical than horizontal), and unnoticeable to my decrepit eyes at 15m+)

 

I also bought a Red Dot Engineering sight protector... that will take a tiny bit of filing / Dremel work too fit, because it's too tight a fit, and there needs to be some relief around the battery cap retainer wire.

Edited by RostokMcSpoons
Link to comment
Share on other sites

11 hours ago, alxndrhll said:

Big personal win for me today, these puppies arrived and the gamble of going with a small reg paid off (been gradually working down from a large reg for the last few years). Fit perfectly, over the moon.

 

EB216095-4153-43D4-8186-A52D3D4E5026.thumb.jpeg.9e61e692f2f41e909639a825068093ed.jpeg

Yes lad! I bloody love Plat stuff. In fact it was chatting to you that convinced me to part with my cash and get some tiger stripe DAX.

 

Got a big list of things to get from them and don't regret a penny I've spent with them since. 

Link to comment
Share on other sites

6 minutes ago, C-Diddy said:

Yes lad! I bloody love Plat stuff. In fact it was chatting to you that convinced me to part with my cash and get some tiger stripe DAX.

 

Got a big list of things to get from them and don't regret a penny I've spent with them since. 

 

I maintain that I hate the knee pad design granted that's not unique to the Platatac ones, I just loathe the Crye knee pad design/system and genuinely can't fathom how its last so long without revision. Aaaaaanyway, that aside the Plat ones are definitely my favourite run of Crye-alikes, glad you're liking them. Looking forward to selling my pair of regular Tigers on so I can grab a new pair in what is now the correct size.

Link to comment
Share on other sites

Two G&G high cap mags for the G(EC)36.   They're very nicely made, and weren't too pricey at ~£25 each from Bullseye.   That means I'm "skirmish-ready" with the G36* as I'll have 2 high caps = 800rds plus 2 mid caps. Which is nice.

 

Also got the Cyma M14 scope mount.  Here's some pain for me - it obviously will fit perfectly, but my aborted attempt to fit the cheapo Ali Express copy I bought a few months ago meant I've cut a bigger thread partway into the front bolt hole.  Not big enough to accept the supplied bolt for that (it's a stupid half size, M5.5 I think).  That means there's not much of the original thread left - and the Cyma bolt isn't quite long enough to reach it now.    I've either got to buy the M5.5 tap and commit to the Ali's bolt, or find someone with a Helicoil set, so I can fit the Cyma one.     Ho hum.




* Assuming the gun shoots straight once it's in The Great Outdoors
 

Edited by RostokMcSpoons
Link to comment
Share on other sites

On 15/02/2023 at 00:29, Enid_Puceflange said:

Holy Warrior on the way

The Spectre DR is just TOOO BIG for my 416

 

F404468A-783A-40DA-BD72-321BA506F689.thumb.jpeg.f63efe39a9c4967281f21b63be8ba065.jpeg

Nah, it's spot on

Link to comment
Share on other sites

This almost generic ICS sports line number from @HuttArmouries to replace my other nearly generic CAA M4. 

Feels great, will still be a while before I can get it out to a skirmish.

 

and now I have a replacement I can take the other one apart and "learn" if I am capable of fixing or I just post a bag of bits to an actual tech 😅

IMG_20230215_202210.jpg

Link to comment
Share on other sites

On 05/02/2023 at 21:56, RostokMcSpoons said:


P90 pouch as a gas can holder?  I like that, I like that a lot!  Just made an order from Patrolbase, I'll see if they've got one I can add in.   (Edit: out of stock, damnit)
It'll save me buying mini-cans I can fit in my existing pouches

Edit:  Is the pouch this double P90 one?
https://www.amazon.co.uk/Viper-P90-Mag-Pouch-V-Cam/dp/B00WX21DFO/ref=sr_1_1
That seems to have an internal divider - do you just cut it out, or will the can fit regardless?

 

Yes you just have to cut the middle wall out most of the way so the gas can will fit easy

Link to comment
Share on other sites

On 24/02/2023 at 12:31, Enid_Puceflange said:


9 days from order to delivery

just had a quick peek in the box

Arrived just in time for a game this Sunday 

 

F253F003-96DF-4B9D-98DF-7145D069B397.thumb.jpeg.f027df29745593d570ae0d7cd09dcc80.jpeg

 

@Enid_Puceflange How mirrored is the front glass / how clear is it? (I desperately want a clearer Eotech clone... or a lottery win).

Link to comment
Share on other sites

Never thought I would buy anything from Nuprol but it fits all my guns that actually work (The M14 it was actually bought for has taken longer than the 14 to 16 days to turn up. hitting 21 days and not even a tracking no). not a fan of the egg crate foam any one give a recommendation for foam that can be cut to shape? 

20230227_170219.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...