Skullchewer Posted November 12, 2022 Share Posted November 12, 2022 I'll be wearing my Halo ODST T-Shirt with it tomorrow 😁 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted December 3, 2022 Supporters Share Posted December 3, 2022 Anyone here with 3D modelling skills/software/maybe a printer open to small commissions? I'm after a rail converter that slides on to picatinny but has NATO dovetail on top. edit - cancel that 😂 I went through quite a few pages of google, thought they didn't exist then found one on eBay. Soz @Speedbird_666 Speedbird_666 1 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted December 3, 2022 Share Posted December 3, 2022 33 minutes ago, TheFull9 said: NATO dovetail on top. What spec is the 'NATO' dovetail? I can only find reference to 3/8in or 11mm dovetail used on commercial firearms/Airguns. Link to comment Share on other sites More sharing options...
mightyjebus Posted December 28, 2022 Share Posted December 28, 2022 bit of a work in progress. Fitting LED's and laser to the TM Curve pistol. LED's work but the laser is giving me grief. Need to redesign the push button as the grey one on there now was just to get things working. Danhc92, Nick G, SilentSparky and 1 other 3 1 Link to comment Share on other sites More sharing options...
Supporters sp00n Posted January 2, 2023 Supporters Share Posted January 2, 2023 Still a work in progress …. I need to remodel the flash hider and coat the inside to make it reflective Nick G and Rogerborg 2 Link to comment Share on other sites More sharing options...
Davegolf Posted January 10, 2023 Share Posted January 10, 2023 (edited) WIP M110K5, suppressor modded/machined, we’ll pleased! Edited January 10, 2023 by Davegolf TheFull9 1 Link to comment Share on other sites More sharing options...
Skullchewer Posted January 13, 2023 Share Posted January 13, 2023 Finished crafting a ghilie cape. Taken ages but I'm happy with it. The hood I already had and have used a few times I bought a cape that clips to the hood and have foliaged the shiz out of that mofo. Could possibly use a little more but it'll do for now. Testing it this Sunday. Shamal and JustMark 2 Link to comment Share on other sites More sharing options...
Shamal Posted January 13, 2023 Share Posted January 13, 2023 19 minutes ago, Skullchewer said: Finished crafting a ghilie cape. Taken ages but I'm happy with it. The hood I already had and have used a few times I bought a cape that clips to the hood and have foliaged the shiz out of that mofo. Could possibly use a little more but it'll do for now. Testing it this Sunday. Nice. Not sure about the branches sticking out in second pic. Birds might perch on them. 😉 Skullchewer 1 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted January 13, 2023 Supporters Share Posted January 13, 2023 Been working on more EPM-1S shells, this time to make them look like M16 VN 20 round mags. Can be printed in one piece, with no additional hardware needed. As close to plug and play as I have come with a design as of yet. V1 was an attempt at adapting my 417 EPM-1S to fit, and was dropped early. V2 was a shell to test general fit. V3 fixed the internal dimensions to allow the EPM-1S to slide in fully - the print failed at about the 85% mark but it still allowed me to test dimensions so I still count it as a success. V4 was the initial "production" model, with the appropriate slots in the mag to make it look like a VN mag. A bottom floorplate was added for the EPM-1S bolt and plunger. The mag catch recession was shrunken to fit within the slots. After printing I confirmed V4 is a working model and I could stop there, but there were a few small details to be added. These included moving the bolt hole 1.9mm forward to align better with the hole in the mag itself, and the plunger recession was modified to fit the more ovular nature of the plunger. V4 in my N23: V4 next to a standard EPM-1S: Left to right, V2, V3, V4: V4 between a VN 20 round mag and a standard 30 round mag: EDcase and Nick G 2 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted January 15, 2023 Share Posted January 15, 2023 (edited) Had my wife working overtime tonight, got her to knock up a patch for my PC Im quietly chuffed, can’t be letting her get big headed 😉 Edited January 17, 2023 by Enid_Puceflange EDcase 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted January 20, 2023 Share Posted January 20, 2023 (edited) working on a TM MK46 recoil in need of some love. Knocked up a 5.56 link retainer for the magazine to keep the rounds attached to the mag (and cheaper than the £66 fake bullet set from TM). The recoil part that shakes the rounds had been damaged so I designed and printed a new one and one of the bipod feet was missing (let's not talk about TM's decision to use a magic pin system to hold the foot on instead of welding it). I've got a replacement bipod on the way so the foot design and print was just for fun and it does work. Edited January 20, 2023 by mightyjebus JustMark, Cocha and Nick G 3 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted January 31, 2023 Popular Post Share Posted January 31, 2023 bought a KWA GBB Scorpion VZ61 for shits and giggles at UCAP vendetta on Sunday and after waving it about in the dark like a moron I decided it needed a torch and tracer adding. I found a file on thingiverse and modified it so that the folding stock could still fold and here it is. EvilMonkee, Nick G, Cannonfodder and 2 others 5 Link to comment Share on other sites More sharing options...
BigStew Posted January 31, 2023 Share Posted January 31, 2023 3 hours ago, mightyjebus said: bought a KWA GBB Scorpion VZ61 for shits and giggles at UCAP vendetta on Sunday and after waving it about in the dark like a moron I decided it needed a torch and tracer adding. I found a file on thingiverse and modified it so that the folding stock could still fold and here it is. do you have a link or would you be willing to print another? Link to comment Share on other sites More sharing options...
mightyjebus Posted January 31, 2023 Share Posted January 31, 2023 (edited) 11 minutes ago, BigStew said: do you have a link or would you be willing to print another? here's the stl file. it's been repaired in 3D builder so should be good to go straight into your slicer. it's a snug fit but for extra security there's a hole in the bottom for a 3mm grub screw. vz61 rail v3 repaired.stl Edited January 31, 2023 by mightyjebus BigStew and TheFull9 2 Link to comment Share on other sites More sharing options...
BigStew Posted January 31, 2023 Share Posted January 31, 2023 1 hour ago, mightyjebus said: here's the stl file. it's been repaired in 3D builder so should be good to go straight into your slicer. it's a snug fit but for extra security there's a hole in the bottom for a 3mm grub screw. vz61 rail v3 repaired.stl 357.21 kB · 0 downloads cheers Link to comment Share on other sites More sharing options...
alxndrhll Posted February 13, 2023 Share Posted February 13, 2023 (edited) Popped this up as a status and pretty quickly realised I never read them so it’s unlikely anyone else does, so I’m going to copy pasta the same text here as it seems like the most concentrated place on the forums for you creative 3D printing folks. If anyone into the 3D printing thing could get in touch about designing/creating/printing me an insert for a 'suppressor' to pack out for a tracer that'd be lovely, I do have dimensions measured up. Should be just a fairly simple tube unless you want to get fancy. Obviously happy to pay for the service, TIA! Edit: Update, part now sorted courtesy of the man below. Thanks for those who have messaged me. Edited February 16, 2023 by alxndrhll Link to comment Share on other sites More sharing options...
mightyjebus Posted February 13, 2023 Share Posted February 13, 2023 5 minutes ago, alxndrhll said: Popped this up as a status and pretty quickly realised I never read them so it’s unlikely anyone else does, so I’m going to copy pasta the same text here as it seems like the most concentrated place on the forums for you creative 3D printing folks. If anyone into the 3D printing thing could get in touch about designing/creating/printing me an insert for a 'suppressor' to pack out for a tracer that'd be lovely, I do have dimensions measured up. Should be just a fairly simple tube unless you want to get fancy. Obviously happy to pay for the service, TIA! PM me the details and I'll have a look alxndrhll 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 16, 2023 Share Posted February 16, 2023 Recently got into 3d modeling and grabbed a printer. Doing some modeling on making a serbu super shorty shotgun but based on a springer tri shot. Made a couple of prototype grips. The fixed one needs slimming down quite a lot but works just fine even at only 20% infil for these prototypes. I was also working on a folding one but Ill need to revisit it at some point because its just not strong enough. Also working on a hk21 machine gun based on one of my g3s Nick G 1 Link to comment Share on other sites More sharing options...
SSPKali Posted February 23, 2023 Share Posted February 23, 2023 Can’t be bothered to try and make a barrel clamp on RIS fit under the front sight so I trimmed a Polymer Magpul Mlok extended rail to suit 😂 Clamps through the holes in the fore end and keep the light out the way. If my repro light had threaded holes I could lose the clamp and bolt it directly - might invest in some taps and try threading it. Nick G and concretesnail 2 Link to comment Share on other sites More sharing options...
Supporters Popular Post SeniorSpaz87 Posted February 28, 2023 Supporters Popular Post Share Posted February 28, 2023 Been working on a M41a/Thompson midcap insert for someone (I dont personally care for either gun but Im happy to help a fellow player), figured Id share it here. JimFromHorsham, Pappa Large, BigStew and 3 others 6 Link to comment Share on other sites More sharing options...
HuttArmouries Posted March 2, 2023 Share Posted March 2, 2023 Made a new toggle for a luger I got out of a parts bin. This one is just for test fitting. Ill pretty it up later. Vaugely considering re doing the whole upper assembly to get some semblance of performance out of this we Nick G 1 Link to comment Share on other sites More sharing options...
Cannonfodder Posted March 3, 2023 Share Posted March 3, 2023 Not sure if it counts a "made" but after A LOT of sanding I've finally managed to get the ammomax P99 holster to actually accept the P99 and lock it in place Link to comment Share on other sites More sharing options...
Moderators Tackle Posted March 4, 2023 Moderators Share Posted March 4, 2023 3 hours ago, Cannonfodder said: Not sure if it counts a "made" but after A LOT of sanding I've finally managed to get the ammomax P99 holster to actually accept the P99 and lock it in place Didn't try boiling water ? Usually works for me🤔 Link to comment Share on other sites More sharing options...
Cannonfodder Posted March 4, 2023 Share Posted March 4, 2023 18 hours ago, Tackle said: Didn't try boiling water ? Usually works for me🤔 Yep, tried that. It worked a bit but not enough to get it to fit properly Tackle 1 Link to comment Share on other sites More sharing options...
Davegolf Posted March 17, 2023 Share Posted March 17, 2023 (edited) Bastardised the shit out my £27 Emerson ‘Wendy’ lid so that it actually fits a man head and I can wear my comtac’s inside it, it’s so comfy now! Should be loads of ventilation too. Edited March 19, 2023 by Davegolf Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now