Hellfish Posted March 5, 2018 Share Posted March 5, 2018 Bipod Added ... All Done now. Arwen, Airsoft_Mr B and Craigmc1983 3 Link to comment Share on other sites More sharing options...
Popular Post GearTech Posted March 5, 2018 Popular Post Share Posted March 5, 2018 These are my 2 new personal pew pews that I will be trying out at NSC up here in 't North East. Both Specna Arms. Hoping the 14 year old lad will pop along too. ibo7, Airsoft_Mr B, Pritch and 8 others 11 Link to comment Share on other sites More sharing options...
Popular Post Ethon Posted March 13, 2018 Popular Post Share Posted March 13, 2018 VFC Sr16 E3 Slab Side Upper SR635 Madbull DD Ris 12" S&T M203 Lozart, Arwen, Duff and 2 others 5 Link to comment Share on other sites More sharing options...
Supporters Popular Post Gepard Posted March 13, 2018 Supporters Popular Post Share Posted March 13, 2018 Bought some rail covers and a torch. I think it looks alright. SCAR_Jester, Andyraven, djben9 and 2 others 5 Link to comment Share on other sites More sharing options...
witchcraft58a Posted March 18, 2018 Share Posted March 18, 2018 A project i've been working on, needed a race gun for cqb, it is very light and maneuverable, decently rapid with a great trajectory. Made from a second hand CM, my bits draw and some choice ebay & forum purchases, hope you like! List: - G&G Firehawk donor gun. - SRU AEG carbine kit - I really like this look, but the kit does need some filing to ensure correct fitment, yet to be seen how durable it is. - Madbull Noveske 7in outer barrel. - Madbull Daniel Defense 7in rail. - Madbull Strike Industries cookie cutter - f'ing expensive, the only part i needed to get full price...... - Butterfly charging handle. - Strike Industries Fang trigger guard. Internal - this is my project gun to get into and properly understand internals, no changes to gearbox or motor yet though!: - Steel tightbore with prowin hop unit - flat hopped, about to get sent off to get the barrel shortened. Accessories: - InForce WML. - Haley Strategic 45 offset adapter. - MagPull puicatinny rail covers. - IMI front and rear flip up sights. - Sig Saur red dot - need to make a perspex insert to protect the lens. I'll post another pic in a second...... StayOnTarget 1 Link to comment Share on other sites More sharing options...
witchcraft58a Posted March 18, 2018 Share Posted March 18, 2018 Evic, StayOnTarget, Albiscuit and 1 other 4 Link to comment Share on other sites More sharing options...
Hellfish Posted March 19, 2018 Share Posted March 19, 2018 Final addition to the externals ... RIS Gas Block. Link to comment Share on other sites More sharing options...
Popular Post Iceni Posted March 20, 2018 Popular Post Share Posted March 20, 2018 LCT G3, Only had 1 skirmish with it, then weathered. Weathering was done with Tamiya 3000 grit sanding sheets, Not cheap, but very fine abrasive. The properties of those sheets allow the paint to be slightly polished or removed depending on the sheet wear and pressure used.https://www.emodels.co.uk/tamiya-sanding-sponge-sheet-3000-grit-87171.html sonofsammo, Wo1f, welchyd1 and 3 others 5 1 Link to comment Share on other sites More sharing options...
Arwen Posted March 20, 2018 Share Posted March 20, 2018 Very nicely done @Iceni ! Link to comment Share on other sites More sharing options...
Iisjreg Posted March 21, 2018 Share Posted March 21, 2018 Did you add any paint, or is that the original paint? Also, do you plan on doing the polymer? Link to comment Share on other sites More sharing options...
mightyjebus Posted March 21, 2018 Share Posted March 21, 2018 work in progress: TM M4 NGRS converted to a L119A2 Long. Parts - Angry Gun Long L119A2 rail SF Slash hider Suppressor low profile gas block Laylax blank lower receiver G&P LMT Pistol grip AFG-2 Acog with RDS Magpul sling adapter Magul stock magic pin fitted to upper and lower receiver Work done so far: Modded GBB Magpul sling adapter to fit NGRS (basically dremel the bejesus out of it) Modded stock pad to accept Lipo (Stock will be changed to the correct tan one when it arrives) added extra rail cutout on top of upper receiver modeled a C7 cocking handle and 3D printed as a prototype and making sure its a good fit before getting some laser cut (green thing) Things still to do: fit the correct stock get the trades done add a 620V torch and dual switch for the torch and Peq fit a mosfet (BTC, DTM or Gates when they eventually release it) get the C7 lever laser cut Dentonboy, FreeFrag.UK and TheFull9 2 1 Link to comment Share on other sites More sharing options...
Guest Posted March 21, 2018 Share Posted March 21, 2018 Fairly standard TM G17 I put together for the other half Link to comment Share on other sites More sharing options...
Dentonboy Posted March 21, 2018 Share Posted March 21, 2018 My TM M4A1 MWS GBBR: - Trijicon ACOG TA01 on a LaRue mount - Magpul stock and Magpul flip up rear sight - Surefire M951 with Surefire IR filter - LBT Multicam sling - Element Dbal MKII - Unknown brand grip Wo1f, mightyjebus and sonofsammo 3 Link to comment Share on other sites More sharing options...
Dentonboy Posted March 21, 2018 Share Posted March 21, 2018 TM FAMAS F1 - RIS set as supplied by @mightyjebus - Cybergun upper handle RIS mount - TM Red Dot Sight - Unknown brand grip Wo1f and Dr_Flankenstein 2 Link to comment Share on other sites More sharing options...
Dentonboy Posted March 21, 2018 Share Posted March 21, 2018 WE Glock 19 with Surefire X200: sonofsammo 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted March 21, 2018 Share Posted March 21, 2018 I think I still have about 8 of those FAMAS RIS rails floating about somewhere Link to comment Share on other sites More sharing options...
Dentonboy Posted March 21, 2018 Share Posted March 21, 2018 TM M9A1 with BlackHawk! lanyard and Safariland 6004. Link to comment Share on other sites More sharing options...
Dentonboy Posted March 21, 2018 Share Posted March 21, 2018 1 minute ago, mightyjebus said: I think I still have about 8 of those FAMAS RIS rails floating about somewhere They are great. Used on RS FAMAS in Afghan' IIRC?! Link to comment Share on other sites More sharing options...
Iceni Posted March 21, 2018 Share Posted March 21, 2018 7 hours ago, Iisjreg said: Did you add any paint, or is that the original paint? Also, do you plan on doing the polymer? The only paint is the black. The LCT G3 is a steel body, so what you see there is metal with a layer of oil. No plans to do anything to the plastics, They interchange so having an older body with new furniture isn't a problem for the loadout. I may at some point get the wood kit for it as it's a direct replacement and not overly expensive. Link to comment Share on other sites More sharing options...
mightyjebus Posted March 21, 2018 Share Posted March 21, 2018 yeah and that's where I got them from along with a couple of the sight rails Dentonboy 1 Link to comment Share on other sites More sharing options...
Dentonboy Posted March 21, 2018 Share Posted March 21, 2018 Just now, mightyjebus said: yeah and that's where I got them from along with a couple of the sight rails Think you would do well listing on eBay tbh. Such a simple, yet effective mod'. Link to comment Share on other sites More sharing options...
mightyjebus Posted March 21, 2018 Share Posted March 21, 2018 it's on my list of things to do.....it's a big list and I'll get around to it eventually Link to comment Share on other sites More sharing options...
Dentonboy Posted March 22, 2018 Share Posted March 22, 2018 When 1 is none and 2 is one. WE Glock 19 with Surefire X200 KJW Glock 27 (Crye AC Combat Shirt in Sand with Gen 2 Elbow Pads) sonofsammo 1 Link to comment Share on other sites More sharing options...
CryosGen Posted March 22, 2018 Share Posted March 22, 2018 Here is my AM009, I feel like I need a PEQ Box on it to complete it Georgeturner2001 and Albiscuit 1 1 Link to comment Share on other sites More sharing options...
Supporters Samurai Posted March 22, 2018 Supporters Share Posted March 22, 2018 5 minutes ago, CryosGen said: Here is my AM009, I feel like I need a PEQ Box on it to complete it Nice, but change that baby suppressor to a grown up one for 5.56. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now