Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 26/04/20 in all areas

  1. my collection of primaries. Being the airsoft hipster I am there isnt an m4 in sight. More than half of these were bought broken and repaired.
    5 points
  2. Now now, that’s just not true is it??? Most of us were savages before lockdown.
    3 points
  3. No, since the lockdown we have become savages and nobody's listing is safe
    2 points
  4. No. Superceded by this post (on page 14): Including adverts from our own Classifieds helps to educate the membership of the forum.
    1 point
  5. I’ll go and get my conch and pig’s head. 🤓
    1 point
  6. directed by m.night.shymalan
    1 point
  7. LVOA-D

    THE TM MWS thread

    My Strike Industries build so far. Decided not to sell the real steel parts after all as I am working towards my license for real practicing with real firearms. So I decided to buy a new MWS to fit it all too. As soon as they are back in stock however I will be buying another MWS to make a Block II FSP build (the one I was going to do instead of this ). So here it is, my "Strike Rifle", not finished yet but for the most part it is to my liking. Only upgrades I'm definitely going to do is get an SI Forward Assist, an SI buffertube and the SI Fang triggerguard and perhaps a set of real magpul pro mbus'.
    1 point
  8. What is it, break barrel thing? Pump it up?? What you spent the other £20 on?
    1 point
  9. Its all fun and games till the justbbguns hobbit sees it and sues me.
    1 point
  10. L3wisD

    SAA, read ad.

    To be fair, I was tempted to buy it based on the advert alone.
    1 point
  11. Cromulon1994

    SAA, read ad.

    This advert is COMPLETED!

    • For sale
    • Used

    For sale. A rectangular cardboard box. Good quality print work. A lovely shade of brown. Comes with a completely crap king arms SAA. Would look good if you want something to put on your wall and show both your love for guns and your solidarity for the LGBTQ community with its rainbow colour scheme. It holds gas. When you pull the trigger some even comes out of the barrel. Though most goes somewhere else. Mostly on your hand. Hell, run it on propane, who doesn't want their hand to smell like rotten anus? Reminds me of when uncle Brian used to come round for playtime... It comes with 6 shells, so if you are stupid enough to already own one of these then hooray, you have a means of carrying another 6 shots of bitter disappointment. And some spares so you can prolong your poor decision even further. This one has been customised. Actually, I'm going to call it weathering. By that I mean I dropped it on a slab about 10 minutes ago by accident while trying to be pretty good. Turns out I'm not pretty good. What else... Oh, faux wood grips that look like they were fashioned from a mid 1990s rover interior. It has a gun sock too to keep it looking pristine. Until you twirl it and it lands on something hard. Like a slab. Or, for the teenagers browsing this forum, the sock could good for a wank or two while watching the free bit of porn that comes on telly between midnight and 1am because mum put a filter on the internet. So , what this is is a gun for everyone. Horny teenagers, the downtrodden, the weirdos and those who like something a bit custom. So for this unique opportunity to own something I can't be arsed to put in the bin, I am asking for 35 of your hard earned (or if your furloughed, hard wanked) great british queens pounds please, that includes paying a man in shorts to come and post a sorry we missed you card through your letterbox and kick your cat in the face on the way back up the drive. And in return you'll get the most honestly described airsoft gun since jambwow discovered crack.

    £35

    1 point
  12. adas1223

    THE TM MWS thread

    I just bought an OEM complete bcg from impulse101. $65 plus shipping. imo the stock bcg has a good balance of efficiency, and recoil weight. the stock float valve can be modded for more fps quite easily too. might be out of stock. I also bought a handful of feedlips from them too. http://impulse101.jp/en/488-m4-mws-parts (Any clue where this goes?) http://impulse101.jp/en/m4-mws-parts/tokyo-marui-spare-parts-m4-mws-mgg2-33-bolt-catch-cushion-4830
    1 point
  13. Two more for the collection. both made by jg and super cheap. Unfortunately this seems to be the only fal style rifle still available apart from the ares slr and ive heard horror stories about that one. Need to remove the stickers still and up the fps on the g3 but Im still super happy with both. Mag pouch recommendations are needed however XD.
    1 point
  14. Whisky1

    THE TM MWS thread

    I'm still using the stock nozzle spring, it broke at the end but I just made my own coil and it has served me very well, it's still going at 8000 shots.
    1 point
  15. I bought a set made by Gunsmodify from Red wolf airsoft. This set has served me well. P.S Redwolf has quite a lot of other parts as well which might be of interest. Otherwise go check out Rainbow8.com Did anyone try the lightweight bolt stop plates from Angry gun and Gunsmodify?
    1 point
  16. The latest addition to the stable. WE G23
    1 point
  17. Bored at home, built a rack. Im sure the family will be happy to have them off the ground...
    1 point
  18. L3wisD

    Gun picture thread

    Specna Arms H20. Settled on the aesthetics now. It's... Taken some "breaking in" shall we say. A few teething problems out of the box, but it's all sorted now, thanks to a Gate USB link and an armorers wrench 😂 I've decided I fucking hate the CTR Stock though. Looks lovely, but getting it off and on and needing Allen keys to get to the battery. Get off. EPS supremacy! ... anyone want to buy a cheap CTR?
    1 point
  19. EDcase

    Gun picture thread

    Posted this on 'Just Bought' thread but I'll post here too for posterity... Nice aged A&K Garand
    1 point
  20. AK5C RPG 26
    1 point
  21. paradoxum

    Gun picture thread

    I finished fully upgrading my Snow Wolf M41A Pulse Rifle (v6 gearbox) including barrel/hopup, (literally almost everything internal replaced or upgraded): After about 8 months since purchasing it and spending most of that time fiddling with it and upgrading / trying to get it to fire straight, it finally is finished and works perfectly. I present the most powerful M41A in the UK: https://imgur.com/a/1f74kOC Parts: M41A Upgrades / Mods - (M41A) Maple Leaf Hop Up Tensioner (Omega Nub) - £6.00 - (M41A) Maple Leaf Macaron Hop Rubber Bucking 60 Degrees (AEG) - £7.50 - (M41A) ASG INFINITY CNC Motor U-30000 (Short) - £54.99 - (M41A) Aluminium piston head with the bearing [Shooter] - £6.79 - (M41A) Light Reinforced Piston Metal Teeth [SHS] - £8.67 - (M41A) Laylax (Prometheus) - Air Nozzle - £15.78 - (M41A) SLD 13:1 Gears (CNC Bevel Version) - £18.50 - (M41A) Lonex Aluminium Cylinder Head for Version 6 - £11.00 - (M41A) Prometheus EG Spring Guide Tornado Shaft (Version 6 & 7) - £19.00 - (M41A) PDI AEG 100% (M95) Silicon Chrome Steel Spring Variable Pitch - £18.52 - (M41A) Guarder Steel Bushing for Version 6 Gearbox (P90/Thompson) - £13.50 - (M41A) STAINLESS CYLINDER WITH HOLE 3/4 (Shooter) - £16.93 - (M41A) Madbull 6.03 Tightbore Barrel 300mm Black Python II - £42.59
    1 point
  22. Re converted the denix to aps shells. They're so much better than pps/madbull type ones. Will probably still fire pps shells but they all now refuse to re set. Re did the wood. Cant wait to shoot it in anger now.
    1 point
  23. Macks: exposing cunts since 2015
    1 point
  24. You have also this one who is funny https://www.fire-support.co.uk/product/ptskwa-glk-g18c-fpg-magazine-long48-rnd
    0 points
×
×
  • Create New...