Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 12/06/19 in all areas

  1. Zerofuxx

    Gun picture thread

    Cheeky! Got this last week used it once so far but its a monster!
    5 points
  2. AK47frizzle

    Gun picture thread

    Alright, the kit is complete: Weighs in at 2288g which is decent. 2530g with the red dot and riser though, which is rather alarming at how heavy optics are. I'll probably remove the silencer and fit a shorter noveske kx3 style comp or something to reduce the length. Few issues though: The trigger is very mushy and hard to spam next shot quickly. The trigger works by a very long bar that goes all the way to the back. I'll need to shim it with tape to make it crisper as there's a lot of play. Stock internals, it is deafening. I'm not going to use something that'll destroy my right ear; I still value my 21kHz hearing range. There are definitely solutions and I'll look them up. Hopefully the lower fps and rogueworx solution will solve it. If not, I genuinely might have to look at another kit.
    3 points
  3. 3 points
  4. Those Chinese Spammers sure are persistent! Thanks for the reports!
    2 points
  5. I'm from the Netherlands but i thought this is a cool forum so i would post to. I have a vfc hk416d Firefield optic and light Ris foregrip Upgrades: - Lonex POM ventilated piston head - Lonex extreme toughness polycarbonate half metal teeth - Action Army aluminium cylinder head v2 - Tornado F1 high torque gen 2 motor long - CNC torque up gears 18:1 - Krytac hopup bucking - SHS pionion gear D-type - Lonex gearbox spring set - Gate titan advanded set rear wired It is reshimmed Only needs another tb barrel and bucking&nub Going to post a picture & gear information in the load picture topic
    2 points
  6. Pics or it didn't happen... 😂
    1 point
  7. Hahaha ! Only catastrophic LiPo failure I’ve ever come across was after a mate pole vaulted on his M14 and broke it which caused the electrics to go tits up ! Was very amusing seeing his very bent looking gun laying on the floor spouting smoke and sparks ! 😂😂 a mate pole vaulting on his M14
    1 point
  8. I'm gonna see how I get on with this one over the next few games and if it's all good I will replace all my nimh's with these. I can't be dealing with the potential hassle of lipo's exploding and burning the house down.
    1 point
  9. Thought I would give a 9.9v life battery a go. And some Space Raiders.
    1 point
  10. Hellfish

    Gun picture thread

    2 parcels arrived today and, things kinda escalated quickly .... Just need parcel 3 to arrive with the optics and it's done.
    1 point
  11. Apologies for the spam - I presume no one wanted to attend Chinese university?
    1 point
  12. MadMole

    Gun picture thread

    My toy SRC Gen 3, full metal Madbull 6.03, Gate Titan, SHS hi torque motor, 16:1 gears, shimmed, Prom purple bucking on airsoft pro hop up. 110 spring, bearing guide, double O rings all round etc 327fps at 17rps on 0.2 bb's with 8.6v. 1" group at 16m I'm blind in my right eye, so have sights on a riser so I can use left eye on red dot on right shoulder and both sights on left Other g36 was a broken one I got cheap. Idiot had over springed it and gears jumping, plus magazine broken. easy fix, now 367fps at 11rps. need to put lower spring it. horribly plastic CYMA. The SRC is leagues better quality
    1 point
  13. Airsoft rifle I'm from the Netherlands but i thought this is a cool forum so i would post to. I got all the gear from shadow (therequirementsgroup). It comes close to the crye and 5.11 brands It is in the multicam greenzone/tropic camo
    1 point
  14. Tec-Spek

    Gun picture thread

    That poor MK23, you can almost hear it saying help, help me, someones shoved a buffer tube up my a*se
    1 point
  15. Shizbazki

    THE TM MWS thread

    My Recent TM MWS skirmishing experience yesterday on 03-03-19 at The Plantation Airsoft, Billericay, Essex. I must say that often when i take guns out for their first outing i'm always a bit apprehensive of how they will perform because whilst i can tech and chrono at home, i have no way to test range and accuracy. My GHK M4 Mod1 and Ares WA2000 are recent prime examples of this when on their first outing they really failed to impress me with their range despite the amount of money i had sank into hop up and barrel upgrades hoping that they would hit the mark. So recently as some of you may know i got hold of this TM MWS second hand, it had already had some some changes (i put the gold on it, it was stock when i got it), i didn't like the 7" RIS rail (too short), didn't like the fact that the inner barrel extended through the flash hider and whilst the pistol grip and stock were Magpul inspired, they weren't REAL Magpul (PTS i think). BEFORE SO i put a barrel extender on it to lengthen the outer barrel by 2 inches so that the flash hider would clear the inner barrel, but this necessitated a 9inch RIS rail which i bought from Wolf Armouries, i went to my GHK M4 Mod 1 and removed the Vortex Optics StrikeFire Red dot sight, the real steel Magpul pistol grip and Magpul MOE stock and put it on the MWS. Had a small issue with the BCG not locking back (see pages 31 to 33 of this thread) but between me and Nathan the Tech at Airsoft Zone we deduced that it must be the BCG and magazine springs, he also kindly installed a lightweight bolt catch in my MWS which i brought into the shop with me. Stretching the magazine springs out solved the issue. AFTER Now she was battle ready or so i hoped as i had not tested the accuracy or range of my TM MWS, i was hoping that it would be like how my TM M92FS wow'd me the first time i used it where the BB seem to travel for miles out ranging even AEGs. First skirmish day at The Plantation Airsoft, Billericay. (MUDDY AF due to recent rain) I'm apprehensive to say the least, i have brought the MWS but also my trusty SAI M4 HPA gun as i know that one works. Mags are loaded and gassed. Take the MWS to the range, hop is set to completely off, using .25g BBs and fired the first shot. OMG! BB flew decently far, with hop off? Adjusted the hop, a little of backward and forwarding and i got it just right. BBs flew for miles straight, i was IMPRESSED! I played the first half of the day with the TM and loved it, more so than when i used the GHK M4 MOD1. I knew i could pull the trigger and the MWS would reliably work whereas the GHK was pull the trigger and please work?! My only complaint is that i had to adjust my game style, no more burst autoing every where or i would have no more ammo, i had to go back to the safe zone twice in two staggered games to re gas and reload but i was much happier using the TM MWS. It did make me wonder, why did i buy the GHK, when i wanted a GBBR the TM MWS was on my potentials list but i dismissed it since it would mean that if i wanted to install a keymod rail, i would have to buy a rail, a barrel spacer, get rid of that triangle sight etc etc. But i still would have saved money if i didn't buy the GHK, i am now strongly considering selling the GHK as its surplus to needs. To the future, i'm probably going to leave the MWS like this because "IT WORKS". I know there's this magical brass nub thingy but I don't want to fiddle removing the hop and stuff otherwise the TM hop fairy dust might be blown away. I might just buy some more Magpuls for the mags and possibly get a Gold BCG but that's it really.
    1 point
  16. 1 point
  17. Katana

    THE TM MWS thread

    So this happened. Modify tan just crapped on me after like 300 rounds. Back to TM I guess. I'm thinking a lemon? I used only Geoffs and g&g bbs. It was definitely working and definitely installed right. The nub is the six g one. Dayum
    0 points
×
×
  • Create New...