Jump to content

_FIL_

Members
  • Content Count

    36
  • Joined

  • Last visited

  • Feedback

    N/A

About _FIL_

  • Rank
    AF-UK Starter

Profile Information

  • Guns
    TM MTR16, TM Gold Match, KRYTAC TRIDENT MKII SPR, KRYTAC TRIDENT MKII CRB, A&K SVD-E

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. _FIL_

    THE TM MWS thread

    @camden Hold the NPAS in place with a screwdriver for example like it is shown here (and using the technique that @Cyberlawyer described) if you don't use the vents, you can always use more force, but you will eventually end up scratching the NPAS(and possibly ruining it so don't)
  2. _FIL_

    THE TM MWS thread

    That grip though... Portuguese things 🤣 right @Laborda? (I´m Portuguese to so I share the same pain) Indeed
  3. _FIL_

    THE TM MWS thread

    Also, I would argue that Portugal is not the worst country to be playing with GBBR since we don't get harsh temperatures(at least near the coast) like in some other countries. So the cooldown effect is not as big/harsh. Also in summer with temperatures like 35º they really come alive.
  4. _FIL_

    THE TM MWS thread

    True story 🤣 I am based in Porto what about you @Laborda? Portugal car****
  5. _FIL_

    THE TM MWS thread

    I have a very similar looking rifle here. my stock broke as well so I was forced to change it Internal upgrades are: - a DP lightweight bolt(with reinforced parts all around) - sixG nub - Promy 370mm barrel.
  6. _FIL_

    THE TM MWS thread

    I have the DP lightweight bolt carrier and I am pretty happy with it. @hunter511 @chrislocho
  7. _FIL_

    THE TM MWS thread

    I plan on running a similar build myself, but with 307mm promy inner and stock TM buicking. Already have a NPAS in the rif just wanted to get an idea of the range I would get with 1.3J/0.28g bb´s
  8. _FIL_

    THE TM MWS thread

    How far can you shoot using the DMR? asking because the legal limit here in Portugal is 1.3J and that's exactly where you at using those 0.28g bb´s.
  9. _FIL_

    THE TM MWS thread

    Where did you guys get your AG MPA Nozzle?
  10. _FIL_

    THE TM MWS thread

    Makes sense, could not move the barrel nuts no matter how hard I tried... Going to try and use hot air to soften it thanks you guys.
  11. _FIL_

    THE TM MWS thread

    To any of the other MTR16 owners out there, how can one replace the inner barrel? Does anyone know of any videos out there that show how to disassemble it?
  12. _FIL_

    THE TM MWS thread

    Going to upgrade some internals This upgrade will focus on the bolt as you can see. I am installing a lighter bolt, a reinforced nozzle, and nozzle reset, an NPAS valve and if need some enhanced nozzle springs. The main focus here is to get more shots per gas fill so that's why the lighter bolt was chosen. Other parts are to help cope with the faster bolt cycle. The exception is the NPAS valve that is to serve as a power regulator and to prepare for a future upgrade regarding the barrel group so to speak. In the picture, we can also see a fine-tune hop-up adjustment wheel and some enhanced hammer springs. The wheel will be used in the mentioned future upgrade in conjunction with a sigx nub, an Eg barrel(370mm 6.03) and tan bucking(some parts need to arrive yet)... The hammer springs are at this point back up only, as I am going to avoid messing with the trigger box in my MTR. Only if something there breaks will I get into it.
  13. _FIL_

    THE TM MWS thread

    Where can we get one?
  14. _FIL_

    THE TM MWS thread

    The bolt does lock with the modded mag when I manually pull it... It does not lock when shooting with it.. Don`t recall if it looks when shooting the other mags
×
×
  • Create New...