Leaderboard

Finally got the G36 brethren together! SRC Gen 2 XM8 - 315fps SRC Gearbox gen 3 8mm gearbox Laylax 6.03 Inner barrel 363mm AirsoftPRO G36 Hop unit AirsoftPRO G36 Air Nozzle AAB Nanogate Mosfet Prometheus purple. Lonex Helical High Torque 16:1 gears FPS Softair Piston FPS Softair Piston Head JG G36E - 310FPS Tokyo Marui cut down FAMAS inner barrel AirsoftPRO G36 Hop Unit AirsoftPRO G36 Air Nozzle SLD High Torque Motor Short JJ Scope side rail for G36 Prometheus Purple Bucking. UFC V3 Spring guide SHS Stainless Steel Cylinder 4/5 Airfet Mosfet SLD 14 tooth lightweight piston ZCI Advanced Gearset 16:1 ZCI PistonHead 8 vent aluminium SHS G36 Cylinder head aluminium ZCI M90 Spring JG SL8 - 445fps Laylax 6.03 Inner barrel 509mm SLD High Torque Motor AirsoftPRO Aluminium air nozzle AirsoftPRO G36 Hop unit AAB MOSFET ZCI Advanced 13:1 gearset SHS One Piece Cylinder SHS full metal tooth piston SHS Flat aluminium piston head SHS V3 Steel spring guide Flat Hop

Have placed a couple of orders with them and service has been excellent. Latest was ordered at about 2pm on a Thursday and it was waiting for me when I got home from work on Friday afternoon. No nonsense, great service. Also has great comms through Facebook if you have a question.

@itsme Not wanting to answer for @Wo1f as he is the originator and a huge font of knowledge but I can't see how it could cut the bucking. The edges are not severe enough and the distance the bucking will push into the concave is not enough to cause damage. Just my opinion of course. On another note, having changed my barrel from standard to an Olga 6.05 250mm with the Modify Tan bucking and SixG super nub. I was wondering how it would increase my FPS. Having been cronoed the previous week at UCAP The Bunker using Abbey Vortex with .2 tracers at 270 FPS. Back at The Bunker on Wednesday using the same gas and the same .2 tracers it is now coming out as 300 fps with a deviation of 2 fps either way over 10 shots. Very consistent. One moment of note, I was guarding an objective and aiming down a long tunnel. We could see the enemy creeping along in the dark. One of my team mates stated "Don't fire yet as you wont reach them". Basically he had just shot and reached about half way (He had spent 5 minutes listing all the upgrades he had fitted whilst in game!). Like a red rag to a bull, I took aim and fired a single tracer round, it rocketed down the tunnel with no deviation, sailed past the point matey boy's AEG shot dropped to the floor and cracked the lead guy in the chest plate. "Hit"... and the rest of the tangos scurried off into the darkness. Followed by a "Hmmm, wow" from the guy behind me. He collared me in the safe zone asking question after question. We may have another convert.

So, been having fun with my vanilla MTR for some time, and decided to upgrade it this week. Orga 410 6.05, Modify Tan buck and the magical nub. Will be battle tested next week.

As a lot of threads end up with one of us recommending the Tokyo Marui MWS, and i get PM's asking about it, i figured I'd start a thread to keep all of the information in one place. Here i plan on covering a general overview of the gun, as well as upgrade parts, general maintenance and tuning. If anyone else wants to share any information, guides or even gameplay with their MWS, here is the place to do it. With that being said, lets get on with it. I've had my 2 Tm m4 GBBR's for a little over a year now, and they've got through dozens of changes to get them where they are today. Out of the box they are beautifully finished and boast impressive performance. I bought my first one from Zeroone, who price matched it for me. At the time the gun set me back £430 and the magazines £35, but they have risen quite a bit in price in most places. The gun is incredibly well finished and sports a Cerakoted receiver. Before opening the box, i didn't get what the big deal was about Cerakote, but that all changed after using it over time. The finish is VERY resistant to the hard life I've shown it, and is far more scratch resistant than any paint or anodization on any other gun I've owned. The two I have still don't have a scratch on them. At the rear is a standard m4 stock, which does its job with little wobble, but isn't the nicest one I've ever seen. The railed handguard is very solid and nicely finished with all of the correct numbered markings on the rails. From there you have your usual front triangle iron sight which DOES NOT have a sling attachment at the base. The magazines hold 35 BB's and have a Cerakoted shell to keep them from scratching easily. They have very recently started coming with silent fill valves, but are mostly the normal kind that hiss when filling and spray liquid propane when full. Its worth noting that the valve sits at an angle to the baseplate. One modification i would highly recommend to do is the "green gas mod" which involves removing a long zinc tube from inside the magazine. This allows more gas into the magazine and upping your shots per gas fill dramatically, with some people reporting 150+ shots from a single gas charge. As a side note, i have started to just cut the zinc tube about 1 inch from the base instead of removing it entirely. A video showing how to do it: Chronograph Results: using blaster .20 BB's and green gas i got around 298 fps with a deviation of 2FPS. yes, you heard that right, " FPS. This thing is incredibly consistent! Important information: The inner barrel is 250mm on the 10.5 " CQBR and the 14.5" carbine, meaning on the 14.5" outer you can fit a much longer 370mm inner barrel. The Hop up adjustment dial is similar to Tm pistols and can be located inside the upper receiver by locking the bolt back and looking down the magwell. Due to the way the outer barrel is cut, it's not possible to fit an aftermarket rail onto the gun without one of two things. A barrel adapter ring (PTS, ORGA and a couple of others make them and usually cost £10) or A dytac outer barrel, which has a wider lip, as shown below. Dytac on the left First shots: I took it down to the 20m range at the First and only shop and loaded it up with .28 blaster devils. They had multiple targets there, but i focused on the little spinning targets at the back wall. The orange discs must have been no more than 1.5 inches in diameter and i was hitting it virtually every time with the iron sights. So far, very impressed with the accuracy. So much so, I treated it to a new dress! First internal upgrades: After speaking with Dave about the gun, he explained that the gun wouldnt hop really heavy weight BB's with the standard nub. because it was hollow and squished when applying hop pressure. To remedy this he machined me a great little nub out of brass. Isn't it beautiful!? This meant i could now lift much heavier BB's increasing my range and accuracy even further than the already impressive stock performance. Using this new nub and GEOFF .32 bb''s i was able to get the bb's out 60+M with a flat trajectory. They were making a 1.5-2ft grouping on the plastic bales as seen in the video below. I have SOOO much move to cover, including barrel reviews, customs mods and a DMR build, but its 5;30 am and i need to be up in an hour, so we'll continue this tomorrow

£200 for a G&G CM16 Mod 0??? Not as silly as some we've seen recently but currently available from Patrol Base new for £125. Now to wait for the OP to come in and explain what makes his second hand toy gun worth the price! 🤣

I think you need more shells.

I've always liked this one

@K-Pop_Fan_4Life I have the same issue!! APS shells....

@RobHedley @Wo1f Allright I trust you guys on this One few more days and my gun is here but I still need to order a wrench and valve key. You recon this wil work? https://www.softairgames.net/en/tools-keys/4789-airsoft-barrel-nut-wrench-element-ex331.html https://www.softairgames.net/en/tools-keys/19058-maintenance-key-valve-gasco2-metal-me05001-bk.html

Arrived today

Nice but needs moooore epicness

A zci rotary hop unit, maple leaf yellow bucking and omega nub. Ordered from ak2m4 just after 2pm yesterday and the package was waiting when I got in from work today. Excellent stuff.

My latest Aus kit Haul from Straya... AMC top (Aussie version of multicam that was issued in 2014, not to be confused with The new AMCU) Auskit chest rig. Cheaper, more widely used copy of the Platatac Peacekeeper TBAS Radio pouch for PRC152 Platapus velcro pouch panel for the rare platapus SF armour vest I have.

Hi guys! New lad here from Spain. Having the MWS CQBR for almost half a year I decided to join this club officially. I read all the posts from the beginning and I decided to share with you some recent pics of my two tastes of CQBR. One for short distances cqb and another one for open field. Both currently with oem inner barrel, modify tan and custom hop up arms without nub. Using Geoffs BBs 0,30 and waiting for PDI precision 6,01 inner barrel. Will post the results here to help if possible. PS: @marine finally you're not alone

So that's my lightweight load out sorted. May add a dump pouch just an an extra carrying option for sundries for longer games.

😀 TM G17, RWA Project NOC slide kit and 6 TM G17 custom mags 🤩

Green gas mod done. And finally service and tighten up the knocker valves so they don’t leak my precious gas! Very happy I got the right tool now. in response to @Davegolf yeah, I had the whole tube removed from the lower. She’s stuck in there good!

Jeez, someone could have told me this was going to be expensive... No pics of the actual kit unfortunately as I'm away at work, but just had delivered a Specna Arms Edge SA-E04 from Patrol Base, top marks for dispatch, very quick delivery. Currently in discussion with a forum member to take an ACOG sight off his hands that he had up in the classifieds, along with a can and a half of tracer .25's. Really like the look of the M4 platform with the ACOG so worth the punt just for the aesthetics. Chap likes his sniping though so hopefully it's a nice sight. To set the tracers glowing just ordered an ASG G&T tracer suppressor, also from Patrol Base. My reason for picking the 04 was the shorter barrel length as my son may end up using it. Adding the suppressor isn't going to make it look overly long and the only thing better than a bit of PewPew is glowy PewPew in the dark! Aiming (scuse the pun) for this kind of look...