Ad_ Posted July 26, 2021 Share Posted July 26, 2021 17 minutes ago, Spartan09 said: as long as i can fit the mags into the pouches, then yes, i will be looking for one of those vests, otherwise i will be looking for something as close as possible while allowing several mags to be carried. I used to use one of those vests with my P90... it's a bit of a squeeze, but the big pouches at the bottom of the vest are *just* big enough to fit two P90 mags each (although it may make the vest stick out a bit at the sides due to how long P90 mags are). Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted July 27, 2021 Supporters Share Posted July 27, 2021 2 hours ago, Spartan09 said: Maybe in the future i will.look at an MP5, but i prefer the look of a p90... plus i already have too many guns at the moment, so im in no rush to buy a new one XD ‘Have too many guns at the moment’ ! How dare you utter such a blasphemous thing ! you can NEVER have too many guns ! 😉 EDcase and Tackle 1 1 Link to comment Share on other sites More sharing options...
Supporters Popular Post Lozart Posted July 27, 2021 Supporters Popular Post Share Posted July 27, 2021 Misery, Alimcd, Monkman and 2 others 2 1 2 Link to comment Share on other sites More sharing options...
Misery Posted July 27, 2021 Share Posted July 27, 2021 @Lozart snap although mines the 1st gen non glow in dark one XD think he needs to do a new one without the hawk XD Monkman and Lozart 2 Link to comment Share on other sites More sharing options...
leadly Posted July 27, 2021 Share Posted July 27, 2021 Just bought a brown KMCS 3.0 from Empire Airsoft. Very impressive service, the suit was with DHL about 15 minutes after purchase! Should be here tomorrow!! Misery 1 Link to comment Share on other sites More sharing options...
Alimcd Posted July 28, 2021 Share Posted July 28, 2021 My mate emptied a hicap of 0.28’s into my (clearly labelled) bag of 0.36’s, so I’ve had to buy 6000 0.36’s from the only seller I could see still had any stock of Geoff’s! Tackle 1 Link to comment Share on other sites More sharing options...
concretesnail Posted July 28, 2021 Share Posted July 28, 2021 18 minutes ago, Alimcd said: My mate emptied a hicap of 0.28’s into my (clearly labelled) bag of 0.36’s, so I’ve had to buy 6000 0.36’s from the only seller I could see still had any stock of Geoff’s! Ouch. Where did you find geoffs .36s though. Link to comment Share on other sites More sharing options...
Supporters Lozart Posted July 28, 2021 Supporters Share Posted July 28, 2021 17 hours ago, Misery said: @Lozart snap although mines the 1st gen non glow in dark one XD think he needs to do a new one without the hawk XD Mine's one of the last of the current batch, new patch is in the works apparently! Misery 1 Link to comment Share on other sites More sharing options...
Alimcd Posted July 28, 2021 Share Posted July 28, 2021 eBay seller is called “gunpointgear” but the only option for 0.36 is 2x3000! 57 minutes ago, concretesnail said: Ouch. Where did you find geoffs .36s though. eBay, seller was called gunpointgear. Only option for 0.36 was 2x3000! Link to comment Share on other sites More sharing options...
Jacob Wright Posted July 28, 2021 Share Posted July 28, 2021 Can we fast forward this thread to the point where I say I’ve bought the TM MP5? TheFull9 and Lozart 1 1 Link to comment Share on other sites More sharing options...
EDcase Posted July 28, 2021 Share Posted July 28, 2021 (edited) Just got a WE PX4 EXS 'Bulldog' Added the barrel adaptor so I could put in a slightly longer inner barrel. Shoots well at around 290fps and quite hefty at 814g Pics with the longer magazine. Also comes with a smaller one Edited July 28, 2021 by EDcase Druid799 and Mad-Al 2 Link to comment Share on other sites More sharing options...
MagpieTactical Posted July 28, 2021 Share Posted July 28, 2021 Just ordered a new cylinder for my T11 sniper rifle. Went for the Action Army twisted cylinder. The rivets at the back of my existing cylinder have gone wobbly, and I suspect are going to let go some time soon. Link to comment Share on other sites More sharing options...
Misery Posted July 28, 2021 Share Posted July 28, 2021 9 hours ago, Lozart said: Mine's one of the last of the current batch, new patch is in the works apparently! ahhh nice one!,even better roll on its release XD Lozart 1 Link to comment Share on other sites More sharing options...
Mad-Al Posted July 29, 2021 Share Posted July 29, 2021 (edited) BCM foregrip, after trying it ive come to the conclusion that the RVG is better in every way. It locks in a way that plays better with other rail covers (with the bcm and certain rail covers like the xtms there has to be a gap between them). The notches in the rvg make it a more comfortable hand stop. The RVG is grippier. The RVG is far superior to grab like a KAC. When grabbing the rifle the profile of the rvg makes it easier to get a consistent grip due to the notches and shape of it. All of this is just IMHO of course. Edited July 29, 2021 by Mad-Al Link to comment Share on other sites More sharing options...
Spartan09 Posted July 29, 2021 Share Posted July 29, 2021 On 26/07/2021 at 23:39, Ad_ said: I used to use one of those vests with my P90... it's a bit of a squeeze, but the big pouches at the bottom of the vest are *just* big enough to fit two P90 mags each (although it may make the vest stick out a bit at the sides due to how long P90 mags are). good to know... added the vest to my shopping list On 27/07/2021 at 01:24, Druid799 said: ‘Have too many guns at the moment’ ! How dare you utter such a blasphemous thing ! you can NEVER have too many guns ! 😉 i just knew that would set SOMEONE off =P Nothing too exciting in this weeks haul... Can of green gas and some more Valkyrie bbs. Also bought a replacement drinking tube for my Source Rider hydration bladder... was wearing the it at CQB last weekend, but someones shot managed to hit the collar that clipped the adapter onto the hose =( (3rd pic shows damage) Also took the oportunity to buy an adapter so i can refill the bladder from a tap or a bottle while its still on my back GothicGhost 1 Link to comment Share on other sites More sharing options...
alxndrhll Posted July 30, 2021 Share Posted July 30, 2021 15 hours ago, Mad-Al said: BCM foregrip, after trying it ive come to the conclusion that the RVG is better in every way. It locks in a way that plays better with other rail covers (with the bcm and certain rail covers like the xtms there has to be a gap between them). The notches in the rvg make it a more comfortable hand stop. The RVG is grippier. The RVG is far superior to grab like a KAC. When grabbing the rifle the profile of the rvg makes it easier to get a consistent grip due to the notches and shape of it. All of this is just IMHO of course. Have you tried it spun around so the angle is forward facing at all? If it’s not for you, then it’s not for you but I find the BCM one the best by a mile personally… but only with the angle facing forward. Speedbird_666 1 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted July 30, 2021 Share Posted July 30, 2021 2 hours ago, alxndrhll said: Have you tried it spun around so the angle is forward facing at all? If it’s not for you, then it’s not for you but I find the BCM one the best by a mile personally… but only with the angle facing forward. This. I have several BCM style grips - I run them all angled-forward. Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted July 30, 2021 Share Posted July 30, 2021 I was under the impression they were designed to be run angled forward, to work with a c-clamp grip. Link to comment Share on other sites More sharing options...
Mad-Al Posted July 30, 2021 Share Posted July 30, 2021 5 hours ago, alxndrhll said: Have you tried it spun around so the angle is forward facing at all? If it’s not for you, then it’s not for you but I find the BCM one the best by a mile personally… but only with the angle facing forward. I tried angling forward but at that point its basically just a less ergonomic grip stop, i think I'm going to have to field it a few times to get the feel for it as I'm trying to grip it the same way as the rvg and i think i need to have more contact with the grip then i did with the RVG. Its just less immediately comfortable. 1 hour ago, Stratton Oakmont said: I was under the impression they were designed to be run angled forward, to work with a c-clamp grip. They are designed to be used either way round but almost every in the wild image I've seen of them they have it angled the same way as me Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted July 30, 2021 Supporters Share Posted July 30, 2021 Can't remember if I posted this here recently, but anyway, the BCM is best as either just a hand-stop using a c-clamp or for the thumb break method. Something that short and fat is gonna suck for most people if you try and broomhandle it as per top right shown above. As a general rule, the shorter/smaller/fatter a thing is on your 6 o/clock rail the less hand you'll probably want to actually have on it. Longer/thinner = more of the grip surface area. The exception of course is a tac-sac. Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted July 30, 2021 Share Posted July 30, 2021 I swapped mine out for a bcm kag, much happier and doesn’t look like sh*t like the bcm vert it replaced Link to comment Share on other sites More sharing options...
paradoxum Posted July 30, 2021 Share Posted July 30, 2021 On 24/07/2021 at 20:48, MagpieTactical said: The clone Surefire Warden arrived. I just ordered the same one for my Hera CQR MagpieTactical 1 Link to comment Share on other sites More sharing options...
Asomodai Posted July 30, 2021 Share Posted July 30, 2021 Just picked up the just released Ares RDB to go with my KSG. Its... an interesting rifle that is probably not worth the hassle. Monkman and paradoxum 2 Link to comment Share on other sites More sharing options...
PopRocket123 Posted July 30, 2021 Share Posted July 30, 2021 26 minutes ago, Asomodai said: Just picked up the just released Ares RDB to go with my KSG. Its... an interesting rifle that is probably not worth the hassle. I really like the look of those but cannot be bothered with dealing with another Ares. Link to comment Share on other sites More sharing options...
paradoxum Posted July 30, 2021 Share Posted July 30, 2021 I like bullpups in general but something about the design of that looks off to me. maybe because it's mostly polymer plastic? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now